This paper based on LFM pulse radar, does research on radar echo simulation and processing.
本文主要工作分为三部分：雷达回波模拟、雷达信号处理和雷达数据处理。
Combining the method of FCT with staggered-grid properly can improve the accuracy of the wave field simulation and processing effectiveness.
交错网格高阶差分解法是地震波场模拟的一种有效方法。
Through simulation, test data collated graphics processing, and control the results of theoretical calculations.
通过模拟计算、试验数据整理、图形化处理，并对照理论计算的结果。
Paper cutter machine is backward with low degree of automation in paperboard processing, so new paper cutter machine has been designed based on pneumatic principle and simulation technique.
在纸板加工生产线中，存在着切纸机设备落后、自动化程度低的现状，为此基于气控原理和仿真技术设计一种新型切纸机。
A general radar signal simulation, acquisition and processing system based on FPGA is designed and implemented.
介绍了基于FPGA设计并实现了一种雷达信号模拟、采集与处理的系统。
Computer applications including scientific computing, data processing and information management, automatic control, computer-aided design manufacturing and testing, the system simulation.
计算机应用领域包括科学计算、数据处理和信息管理、自动控制、辅助设计制造和测试、系统仿真。
The composition of the simulation system, data processing flowchart and simulation mode that included the missile dynamics, sensitive element and variable structure controller were given.
给出了该仿真系统的组成、信号处理流程，以及包括弹体动力学、敏感元件和变结构控制器的仿真模型。
In this paper, the software module of PMT NC system is divided, and the programming module, processing module, simulation module and hand control module are introduced.
对并联机床数控系统进行了软件模块划分，重点介绍了程序设计模块、加工及仿真模块、手动测量模块的主要功能。
An automatic data acquisition and graph processing system for potential field simulation is presented.
本文介绍一个位场模似自功数据采集及图形处理系统。
Simulation results show that: the algorithm is a practical and efficient edge detection algorithm, and this method can easily extend to more threshold edge detection of image processing.
仿真结果表明：该算法具有较强的检测模糊边缘能力，是一种实用、高效的边缘提取算法，同时此方法很容易扩展到多阈值图像边缘处理。
The system of mathematics experiment can be divided into three levels: i. e. figuring, validating (simulation and demonstration), mathematical modeling (data processing and experience summarizing).
数学实验的内容体系可分为演算、验证(模拟、演示)、数学建模(数据处理、经验归纳)三个层次。
The simulation results show that this method can raise the call processing capability in real time and raise the utilization of the network resources in the meanwhile.
仿真结果表明，该方法提高了网络对呼叫的实时处理能力，又增加了网络资源的利用率。
The main work of this paper contain two parts of content, simulation researching on high precision position arithmetic for USBL and the signal processing software design.
本论文的工作主要有两个部分：长程超短基线定位系统的高精度定位算法仿真研究和系统信号处理软件设计。
The simulation strategy that this procedure adopts is the event scheduling. Therefore, the main work focuses on dealing with the event table and processing the corresponding subprograms.
本程序采用的仿真策略是事件调度法，故主要的工作就是围绕着事件表进行并处理相应的子程序。
In many fields it has broad potential applications, such as forecast, pattern recognition, automatic control, other areas intelligence simulation and information processing.
该技术在很多领域都具有广阔的应用潜力，如预测预报、模式识别、自动控制等领域的智能模拟和信息处理。
Simulation results show that this method can be applied to wideband signal processing and its computational burden is much less than conventional beam-forming method.
计算机仿真结果表明此方法可以运用到宽带信号处理中，计算量与传统的波束形成法相比大大减少。
The processing system simulation use the processing system model to carry out the research, analysis and experiments in the simulative condition and environment.
加工系统仿真是利用加工系统模型在仿真环境和条件下，对加工系统进行研究分析和实验。
Results of simulation illustrate that the proposed algorithms can be applied to not only the MIMO system, but also the array signal processing and wireless communication system.
仿真结果表明，所提方法不仅可以直接应用到多输入多输出系统，而且还可应用到阵列信号处理及无线通信系统中。
An interface based on NC codes for processing simulation is built by analyzing numerical system and NC codes, a general idea of code translation is developed.
通过分析数控系统和数控代码的特点建立基于代码的加工仿真接口，提出代码翻译的基本思路。
Then the virtual solid state material processing and heat treatment processes can been realized based on computer simulation.
这样就实现了基于计算机数值模拟的虚拟材料固态加工及热处理过程。
Estabishes the opening point model for a two stages relief valve and through the data processing of mathematical simulation of that point to obtain the empirical formula.
建立了双级溢流阀的开启点数学模型，并通过对该点的数字仿真的数据处理，得出了经验公式。
The visible spectrum characteristics of the copper matrix and component in Cu-based alloy were(studied) with computerized digital simulation processing technique.
对铜合金可见光谱线进行了计算机数字模拟处理，研究了基体元素铜和各成分元素的可见光谱特征。
The technique may be used for real-time signal processing and simulation in radar due to its multiplicate advantages such as strong theoretical basis, simplicity and excellent simulation effects.
这种方法理论依据较强，实现起来简单且杂波模拟效果非常理想，从而为雷达信号的实时处理和实时仿真提供了行之有效的手段。
The visual simulation based on DIS raises a high demand on the graphics and the net processing ability of the simulation nodes, thus optimization in the modeling and choice of algorithms are required.
基于分布式交互仿真的视景仿真系统，对仿真结点的图形和网络处理能力提出较高的要求，需要在建模和算法上进行优化。
According to the characteristics of "signal and system" and "digital signal processing", the MATLAB software was used effectively on the simulation experiment, course design and multimedia teaching.
针对“信号与系统”、“数字信号处理”课程的特点，运用MATL AB软件进行模拟实验、课程设计，并运用多媒体教学提高了教学效果。
Steel pipe flaw testing principium is briefly described, pipe flaw testing signal is analyzed, the design and simulation of signal processing circuit are discussed in detail.
介绍了钢管管缝检测原理，对管缝检测信号进行了分析模拟，对信号处理电路的计算机仿真设计及参数选择进行了较详细探讨。
The initial optical experimental platform was built, and restoration processing methods were discussed according to different blurring characteristics through experimental clouds simulation.
建立了初步光学实验平台，通过模拟云雾干扰实验，研究不同模糊特征图像的恢复处理方法。
This paper takes steel slag as simulation object, and studies the processing technique of centrifugal graining equipment water quenching method for molten steel slag.
本论文以液态钢渣为模拟对象，研究液态钢渣的离心粒化设备水淬法处理技术。
Others begin careers that make specialized applications of this discipline, including computer simulation and virtual reality, medical image processing, actuarial analysis, and so on.
其他人则从事对此学科的特殊应用工作，包括计算机模拟，虚拟现实，医学图像处理，保险精算分析等等。
The theoretical and simulation analysis about acoustic signal processing in multi-path channel and the engineering software design are given in the dissertation.
该系统采用主动工作方式，本文系统地研究了在多途信道中对声学信号进行处理的理论研究和仿真分析及工程软件设计。
应用推荐