Some simulation and experiment results are provided.
文中给出了部分模拟与实验结果。
The result is basically consistent between numerical simulation and experiment.
数值模拟结果与实验结果基本吻合。
The results of computer simulation and experiment both show that the method is feasible.
模拟结果和实验测量结果表明该方法是可行的和有效的。
Both numerical simulation and experiment were adopted to research ducted heat convection.
采用数值模拟和实验研究相结合的方法研究了管道的对流换热。
In this paper, theoretical analysis, computer simulation and experiment verification are combined to conduct the research.
本文采用理论分析、计算机模拟和实验验证相结合的方法进行研究。
The influence of inner cone hole depth changes on the jet performance is investigated by numerical simulation and experiment.
通过数值模拟和实验测试相结合，研究了锥孔深度变化对外部射流的影响。
The simulation and experiment of wall-flow diesel particulate filter (DPF) with reverse pulse air regeneration were performed.
进行了柴油机过滤体逆向喷气再生系统的模拟与试验研究。
Simulation and experiment on basic principle, imaging algorithms, auto - focusing techniques and bathymetry are given in chapter five.
理、成像演算法、自聚焦运动补偿技术与合成孔径测深的模拟和实验结果。
The superradiance mechanism in RBWO was studied systematically by associated method of particle simulation and experiment in this dissertation.
本文运用粒子模拟和实验研究相结合的方法对相对论返波管中的超辐射机理进行了系统的研究。
Combined studies on the behavior and effects of jetting penetrator charge when operated underwater were performed in simulation and experiment.
采用数值模拟与实验相结合的方法研究杆式射流装药水下作用行为。
In this paper, the microbuss temperature field and velocity field is researched through numerical simulation and experiment for the first time.
本文首次采用数值计算和试验相结合的方法对微型面包车车室内温度场、速度场进行了研究。
By theoretical analysis, numerical simulation and experiment research, the Interleaver based on optical all-pass filter technique is investigated.
对基于光全通滤波技术的奇偶交错滤波器进行了理论分析、数值模拟和实验研究工作。
The methods of numerical simulation and experiment have been used to study flow laws and distributing uniformity of baking equipment in the paper.
本论文采用数值模拟和实验相结合的方法，研究了焙烧装置分配室的烟气流动规律和流量分配均匀性。
Usually, numerical simulation and experiment method are be used for analyzing the interior airflow field under the condition of natural ventilation.
在研究自然通风下室内流场分布情况时，一般采用数值模拟与实验测量两种方法。
In this paper, the flow mechanism and the applications of thrust vectoring using synthetic jet are studied in theory, numerical simulation and experiment.
本文采用理论分析、数值模拟与实验相结合的方法对合成射流流动机理及推力向量控制中的应用进行研究。
Simulation and experiment results show its good static and dynamic performance, as well as robustness against system parameter variations and load disturbances.
仿真和试验结果表明该控制策略对系统参数和负载扰动具有很强的鲁棒性，系统动、静态性能良好。
The simulation and experiment have shown that the pattern may restrain remarkably impurity segregation effect in the process of PMOS structure grid oxidization.
模拟及实验证实，该模式可显著抑制PMOS结构栅氧化过程中的杂质分凝。
Alternating direction implicit iteration method is developed for simulation. The results of the numerical simulation and experiment are basically in accordance.
其模拟结果与实测结果吻合较好，表明利用该方法模拟蓄水单坑的水分入渗问题是可行的。
Simulation and experiment results demonstrated the efficiency of the control method. The controller has a simple structure and its parameters can be tuned on line.
仿真和实验结果都表明了控制方案的有效性，而且该控制器结构简单、参数可在线调整。
The synthetic control algorithm is put forward which has been proved by simulation and experiment, the results of theoretical analysis and experiment are coherent.
提出了无级变速传动的综合控制算法，进行了无级变速传动匹配控制仿真研究及台架试验，试验结果与理论分析结果具有良好的一致性。
The simulation and experiment results show that this dual-model control method realizes the expectant objective, and it ensures the smoothness of the robot moving.
仿真和实际实验表明，这种双模控制方法实现了预期的目标，且保证了机器人行走的平滑性。
Finally, the correctness is verified by simulation and experiment. It is indicated that this method is adequate for the inverters with series-parallel resonant load.
仿真及实验结果验证了该方法的正确性，表明该方法适用于串并联负载谐振逆变器。
The performance of dual-bed three-way catalytic converters with conventional structure and a particular structure was compared by numerical simulation and experiment.
采用数值模拟和实验相结合的方法比较了常规结构和一种特殊结构双载体三效催化转化器的性能。
The Angle steel cross-section temperature field in cooling process simulation and experiment results are in good agreement with controlled cooling research of Angle steel.
通过对角钢控制冷却的研究，角钢冷却过程中断面温度场数值模拟结果和实验结果吻合良好。
The simulation and experiment results show that this system not only is feasible, but also is of fine speed and position control ability and has broad developing prospects.
仿真和实验结果基本一致，证明了该系统的可行性，系统具有良好的速度和位置控制能力，有着广阔的发展前景。
The simulation and experiment results show that this system not only is feasible, but also is of fine speed and position control ability and has broad developing prospects.
仿真和实验结果基本一致，证明了该系统的可行性，系统具有良好的速度和位置控制能力，有着广阔的发展前景。
应用推荐