To the second scheme, theoretical and simulation analyses on local connectivity and resilience are presented.
对于第二种方案，本文对局部连通度和弹性分别进行了模拟和理论分析。
With a lot of tests and simulation analyses from the weight matrix selection of quadratic optimum control design, the principles of selecting weight matrix are summed up.
本文在线性二次最优控制设计中关于权矩阵的选取问题作了大量的试验与仿真分析，得到了关于权矩阵选取的一些基本规律。
Result of numerical simulation analyses powder grain size influence to velocity and temperature of flame, repeat with different grain size parameter simulation calculate, it has impo...
根据数值模拟结果分析了粉末粒度对火焰焰流速度和温度的影响，用不同粒度参数重复模拟计算，这对喷涂粉末的加速和加热性能具有重要意义。
Under different speeds, series of simulation analyses of vehicle ride are carried out. Compared with the experimental values of the real vehicle, we can make sure the validity of the multi-body model.
在不同车速下对建立的整车多刚体模型进行平顺性仿真计算，并将仿真分析的结果与实车实验值进行比较，确定所建立模型的有效性。
The paper introduces the exploitation of the distributing campaign simulation system, emphases to advance the system structure on HLA, analyses the key technologies.
介绍分布式作战仿真系统的开发，重点提出了基于HLA技术的系统体系结构，分析在创建系统时的关键技术。
Based on indoor physical simulation and analyses of fractal geometrical characters, the mechanism of formation and the rule of basic development of the Yuci ground fissures are expatiated.
本文在采用室内相似材料物理仿真模拟试验和非线性分形几何特征分析基础上，论述了榆次地裂缝的形成机理和基本发育特征与规律。
Using system engineering theory and method, system model and simulation method, the paper analyses the conflict between supply and demand of water resources within the system.
文章用系统工程的理论和方法，用系统模型和模拟的方法，分析系统内水资源的供给与需求。
Analyses and simulation results show that the broadcast protocol can not only avoid collision, but also highly reduce the redundant rebroadcasts and the broadcast latency.
分析和仿真结果说明，本文所提出的广播协议不仅能够避免冲突而且能够大大减少冗余的广播消息和减小广播延时。
Presents the demands for indoor environment of the injection workshop, air conditioning design and energy saving design. Analyses the flow field with the method of CFD numerical simulation.
介绍了该输液车间室内环境要求、空调工程设计及空调系统的节能情况，利用CFD数值模拟方法对流场进行了预测分析。
Simulation of dynamic voltage stability of induction motor in the context of small disturbances and analyses of the simulation results with its load characteristics.
对小扰动下感应电动机的动态电压稳定性进行了仿真，并运用其负荷特性对仿真结果进行了分析。
To obtain rail irregularity samples for train-bridge vibration control and stochastic analyses, a simulation method of irregularities at all axles of a train was investigated.
为获得各轮轴处轨道不平顺，用于列车-桥梁振动控制和随机振动分析，研究了轨道不平顺的模拟方法。
Quantitative analyses and dynamic simulation were undertaken on vernalization, photoperiod response, and their relationships to development progress in wheat.
对小麦品种的春化作用、光周期反应及其与发育进程的关系进行了量化分析和动态模拟。
The main focuses of this thesis are model simulation, coupling analyses, decoupling PID controller design and multivariable predictive controller design based on wastewater treatment Benchmark.
本文的主要工作是模型仿真、系统的耦合性分析、多变量pid解耦控制器设计及多变量预测控制器设计。
Based on lot of simulation experiments and theory analyses, research on selecting the optimization object function and the optimization strategy has been made in detail.
以大量的仿真实验及理论分析为基础，对寻优时目标函数的选取及寻优策略进行了详细的研究。
The simulation operation analyses of the key units of the system provide a good basis for further design and improvment.
对各关键单元进行的模拟操作分析，为该系统的优化计算和改进现行操作工况提供了较好的依据。
On the basis of theoretical analyses, simulation tests and application actuality, an optimized design on the structure of auxiliary unloading system is made.
在理论分析、模拟试验和实际使用的基础上，对辅助卸油装置的结构进行了优化设计。
The article firstly analyses and sums up the required functions by process simulation training supporting system.
该文首先分析总结了过程仿真培训支持系统的功能要求。
Both theoretical analyses and simulation results indicate that time-frequency mixed algorithm could generate sequential SAR echo waveform simulation data in real time.
理论分析和仿真结果表明，时频混合算法能够连续、实时地产生SAR模拟回波数据。
The animate simulation for the coaxial collision of two elastic bars is performed onthe basis of the analyses for the stress waves.
在应力波分析的基础上，对两根弹性杆纵向共轴撞击过程进行了动画模拟。
This paper analyses nonlinear mapping characteristics of cloud model, presents the design method of the intelligent controller based on the structure model, and shows some simulation examples.
文中分析了云模型的非线性映射特性，同时给出了基于此结构模型的智能控制器的设计方法及仿真实例。
Using the method discussed above, the author analyses and gives the data model and the arithmetic model of the ZXJ10 Exchanger training simulation system integrated database-modeling technology.
并利用该方法，结合数据库建模技术分析和建立了ZXJ10程控机训练仿真系统的数据模型。
The random road is the leading excitation origin for vehicle and the simulation and analyses on rough road is the basis for the analyses on vehicle ride comfort.
汽车的主要激励来自路面，对路面不平度的模拟和分析，是进行汽车行驶平顺性分析的基础。
Numerous simulation experiments and statistical analyses show that he minimum deviation algorithm is a reasonable, effective and applicable algorithm.
通过实验设计，用大量随机数据进行了模拟和统计分析。结果表明，最小偏差算法是一种合理的、实用的、有效的算法。
In this paper, a description is made on the simulation technology of joint network in rock mechanics. Analyses have shown its vast vistas in engineering application.
本文对岩石力学中的节理网络模拟技术进行了叙述。工程应用表明：该技术具有广阔的前景。
Numerical analyses on underground cavern excavation have shown the effectiveness of the procedure and the advantages of adaptive multi-grid FEM in the simulation of excavation process.
通过算例说明了方法的有效性以及自适应多重网格有限元用于开挖施工过程模拟分析的优越性。
The Thesis analyses many kinds of Algorithm about Bayesian network structure learning, and then Setting-up a new Algorithm about structure learning Foundation on hydro-electrical simulation system.
本文在分析了多种贝叶斯网络结构学习算法的基础上，并且根据水电仿真的应用背景，提出了一种根据多专家提供的规则库进行贝叶斯网络结构学习的新算法。
This thesis reviews the state of art in Internet congestion control research, and then analyses the nonlinear dynamics of Internet congestion control system based on simulation tools.
本文在归纳、总结了关于互联网拥塞控制的研究现状的基础上，利用仿真工具，分析了互联网拥塞控制系统的动力学行为。
Finally, in allusion to the current detection system simulation, reliability detection, and the detecting result on the welding filed, this paper analyses their data and curves in detail.
论文最后对电流检测系统的模拟调试、可靠性检测以及在焊接过程中的实际检测结果进行了详细的数据与曲线分析。
Finally, in allusion to the current detection system simulation, reliability detection, and the detecting result on the welding filed, this paper analyses their data and curves in detail.
论文最后对电流检测系统的模拟调试、可靠性检测以及在焊接过程中的实际检测结果进行了详细的数据与曲线分析。
应用推荐