Theoretical analysis, simulation experiment and engineering exploration are adopted to study the impact of the location of primary key stratum on the evolution range of water flowing fracture.
采用理论分析、模拟实验和工程探测等方法，就覆岩主关键层位置对导水裂隙带高度的影响进行深入研究。
In the process of completing, the mechanism design requests are considered fully, some methods such as the computer assistant simulation design, finite element analysis and test verify are adopted.
在完成过程中，充分考虑了铺设轮的机械设计要求，采用了计算机辅助仿真设计、有限元分析和试验校验的方法。
The accuracy of the ICE spray calculation results depends on the models adopted for simulation of the(primary) and secondary breakup process.
内燃机喷雾模拟计算结果对选用的初级破碎模型、次级破碎模型有较强的依赖性。
After the success in decoupling, single neural cell self-adapting PID is adopted to control nonlinear object. The simulation results show that the control strategy gets better effects.
当解耦器训练结束后，对于非线性对象采用单神经元自适应PID来进行控制，仿真结果表明，此控制方案效果较好。
In the numerical simulation of relieving residual stress by hammer peening, contact element technique was firstly adopted for establishing the finite model and calculating the hammer peening.
首次在锤击消除焊接应力的数值模拟研究中，采用接触单元技术建立有限元模型模拟计算锤击作用。
In the part of prime mover simulation, the technique of armature current feedback plus speed feedback is adopted to alter the mechanical character of the DC electromotor.
在原动机模拟部分，采用电枢电流负反馈加转速负反馈的方法对直流电动机的机械特性进行改造。
We studied the model problem of controlled "dead zone" in the bone remodeling simulation in which combination of bone remodelling with finite element method was adopted.
本文研究了在采用骨再造理论和有限元法相结合的骨再造仿真中，“死区”控制模型问题。
The hardware - in - the - loop simulation technics may be adopted in development of automobile control system to test the software and hardware of the control system.
在汽车控制系统开发中，采用硬件在环仿真技术可以对控制系统软硬件进行测试。
After analyzing and comparing some path search algorithms, the paper ultimately adopted a simple single threshold algorithm and attained optimal parameters through simulation.
本文分析、比较了现有的几种路径搜索算法，最后采用一种比较简单的单门限算法，并通过仿真得到参数最优值。
This paper discusses modeling and simulation of order-up-to levels of entities in CLs in an uncertain environment where periodic review policies are adopted.
讨论了在不确定性环境下，采取周期性盘点策略的复杂物流系统中各实体订货点量的建模与仿真问题。
Wind speed time series obtained with numerical simulation methods are adopted in structural analysis of wind-induced vibration.
基于数值模拟方法的风速时程曲线在桥梁结构风振分析中被广泛采用。
Different large eddy simulation coefficients were adopted in the calculation.
计算中采用了不同的大涡模拟系数。
Two models of linear and non-linear simulation technique are adopted to consider the horizontal stiffness of pile foundation.
对桩基础的水平向刚度模拟采用了等效线性及非线性两种模式。
Numerical simulation of pollutants' diffusion in air has been adopted widely, but the false diffusion occurring in simulation is always an important factor affecting the accuracy of the results.
用数值模拟的方法预测污染物在大气中的扩散已经被广泛采用，但数值模拟产生的伪扩散一直是影响模拟结果精度的重要因素。
The numerical simulation method is adopted to get the distribution of the soil stress and the displacement variety of some points during the excavating and supporting process.
采用数值模拟方法，得出该基坑开挖支护过程中土体的应力状态分布变化情况及基坑周边某些点的位移变化情况。
In this paper, several problems in regard to simulation of detonation by HELP program are described. With some reasonable treatments we adopted, satisfactory results are obtained.
本文描述了用HELP程序模拟稳定爆轰时出现的几个问题经过适当的处理，得到了满意的结果。
The correctness in computer simulation is confirmed: 9 cells on the empty position are to be used with the movable probability of first floor adopted in the computer simulation.
也证实了采用取空位上9个单元并取第一层的移动概率进行计算机模拟的正确性。
Principles of fuzzy neural network and FNN method are adopted for the numerical simulation of network modeling and forecasting of beams with finite deformation of two different materials.
本文运用模糊神经网络原理，采用学习结合型FNN方法，针对两种不同材料梁的大变形进行了网络建模和预测的数值仿真。
In the simulation of mineral-like materials, the most used materials are granular soil, in which iron is usually adopted as a kind of aggregate for increasing bulk density.
在矿山相似材料模拟中，相似材料大多数为散粒体，而铁作为一种增加容重的骨料在其中得到广泛的应用。
The method is adopted in the tail-race system dynamic simulation calculation of Baise hydropower station, and the tailrace tunnel shape is optimized, so the satisfying result is worked out.
将该方法应用于百色水电站的尾水系统动态仿真计算中，并对尾水隧洞洞型进行优化，得到了满意的结果。
In this paper, a control system with restraining negative sequence current is adopted simulation results of which demonstrate that output current waveform can meet sinusoidal and balanced demand.
为了解决上述问题，本文采用了抑制网侧负序电流分量的控制方案，仿真结果表明采用该方案后输出电流波形满足了正弦化及平衡化的要求。
HLA frame structure was adopted in the simulation system, and federal members were joined by transferring interface in interface standard.
该系统采用HLA框架结构，接口规范通过调用接口联接联邦成员。
The generalized Newtonian fluid models are commonly adopted in the numerical simulation for non-Newtonian fluid for their advantages of simpleness in form and low computational complexity.
阐述了广义牛顿流体模型形式简单、计算量低，在非牛顿流体搅拌流场数值模拟过程中应用广泛；
Both numerical simulation and experiment were adopted to research ducted heat convection.
采用数值模拟和实验研究相结合的方法研究了管道的对流换热。
Numerical simulation was adopted to investigate the influence of the melting process in vibration-induced extrusion.
采用数值模拟方法对振动诱导挤出熔融过程中振动参数的影响规律做了深入系统的研究。
The numerical simulation of adsorbent bed has adopted one-dimensional uniform pressure field model along the circumference.
吸附床的数学模拟采用沿吸附床周向的一维均匀压力场模型。
The numerical simulation of adsorbent bed has adopted one-dimensional uniform pressure field model along the circumference.
吸附床的数学模拟采用沿吸附床周向的一维均匀压力场模型。
应用推荐