The results of calculation and simulation indicate that application of the discrete method for problem of trajectory optimization can avoid the problem of initial value sensitivity.
仿真计算结果表明这种离散化的方法应用于此轨道优化问题可以避免传统轨道优化方法对初值敏感的问题。
The simulation of some test function optimization using BCC algorithm shows BCC algorithm a kind of potentially powerful optimization method worth of much more research.
对不同函数优化试例的仿真表明细菌群体趋药性算法性能良好，是一种具有进一步研究价值的集群函数优化方法。
The simulation results show that system's average service time under this kind of optimization method is 20% shorter than other ways, it gets obvious optimization effect.
仿真应用结果显示，基于此优化方法的智能多代理系统服务时间比优化前平均缩短20%，有效地提高了系统服务质量。
By using the sufficiency drawing method for annealing simulation, the optimization method for improving the defect diagnosis accuracy of aeronautical ti sheet drawing die is discussed.
并采用模拟退火的适应度拉伸方法，探讨了有效地提高航空钛板拉延模试冲时的缺陷诊断准确率的优化方法。
Therefore, there are notable engineering significance and academic value to seek for a numerical simulation based optimization method for auto panel forming process.
因此，基于成形过程数值模拟，寻求适用于汽车覆盖件成形过程的优化方法，具有重要的工程意义和研究价值。
The optimization process condition is researched by the method of simulation, and bring up the usage scope of this method.
并用模拟法进行了部分氧化工艺优化条件的研究，提出了这一方法的使用范围。
Then, starting with the concept of information entropy and analysis about cross method for rare event simulation, this thesis introduces the basic idea of cross entropy optimization method.
接着从信息熵的概念谈起，通过对小概率事件仿真方法的分析，引出交叉熵优化方法的思想。
This simulation method can conduct die structure optimization, and reduce repeat die repair and waste of die trial energy, and improve rate of finished product.
以某型铝合金车轮的模具设计为例，证明了该模拟方法能够指导模具结构优化，减少反复修模、试模所造成的能源浪费，提高工艺成品率。
In this paper a new approach for optimising electrode contour is described, which combines the correction of coordinates and magnitudes of optimization charges with Optimized Charge Simulation Method.
本文提出用优化模拟电荷法结合优化增量方程，通过交替修正优化电荷的电量和位置参数来优化电极形状。
The numerical simulation methodology and optimization algorithms are integrated to optimize gate location of mold design. A new optimization method of experience search is founded.
在此基础上，将数值模拟技术和优化算法相结合，提出了基于数值模拟技术的浇口位置的优化方法：经验搜索法。
And the progress of construction through analysis and optimization, simulation run major business process improvement, test the feasibility of the method and effectiveness.
并通过施工总进度分析与优化、主要业务流程仿真运行改进，验证了该方法的可行性及实效性。
Carrying out simulation of process by sequential modular approach, optimization of slight boost pressure process and boost pressure process have been realized by feasible path method.
以序贯模块法作为流程模拟方法，采用可行路径法对两种流程进行了优化。
This paper, using the coupled method of simulation and optimization models, presents a series o groundwater hydraulic management models for groundwater management.
本文用模拟模型与优化模型偶合方法，研究了地下水管理问题。
The combined method of gnass elimination and optimization is used to solve the equation of charge-simulation, and it is an effective method for increasing the accuracy and assuring the convergence.
文中提出用高斯列主元消去法与最优化方法相结合的技术求解模拟电荷方程组，是提高精度和保证收敛的一种有效算法。
The biggest advantage of the method is that the preprocessing is very simple; and it can be used in the excavation simulation and shape optimization for complicated slopes and caverns.
该方法的最大优点在于前处理简单，能运用于复杂边坡、洞室的快速开挖仿真和体型优化分析中。
The method can reduce simulation frequency, increase optimization efficiency of parameters, and improve the accuracy of simulation calculating in sheet stamping.
该方法明显地减少了模拟实验次数，提高了参数优化效率，改善了板料冲压成形的仿真计算精度。
The results show that simulation technology gives a credible method for composite processing optimization.
结果表明：数值模拟技术为复合材料成型工艺优化提供了可行方法。
Numerical simulation result shows that this method can be used for rapid evaluation of sheet metal forming process design and for the optimization of process parameters.
实例证明，一步模拟法可用于板料成形工艺方案的快速评价及参数优化。
Nowadays, many enterprises and design department have used finite element method widely on the manufacturing process simulation of product, optimization design and so on.
今天的很多企业和设计部门已普遍采用有限元方法，对产品进行生产过程的数值模拟、优化设计等研究。
In order to improve firing stability of truck-mounted gun system, based on dynamic simulation and optimization method, stability optimization study of recoil and counter-recoil is performed.
为了提高车载火炮系统射击稳定性，基于动力学仿真和优化方法进行后坐稳定性和复进稳定性优化研究。
This paper suggests a new method which applies oblivion factor and USES the information that is taken from simulation of old parameter, and thus can enhance the speed of optimization evidently.
该论文提出了一种引入遗忘因子，利用参数取旧值时的仿真中所获得的信息进行优化的方法，使寻优速度有显著提高。
The effectiveness of the proposed simultaneous optimization method to improve ride comfort and handling stability of vehicles is proved by theory analysis, simulation and test.
仿真计算和道路试验均表明经过集成控制和集成优化设计后，汽车的行驶平顺性和操纵稳定性等综合动力学特性得到了改善。
It shows that the numerical simulation is an effective method to analyze and design welding transformer. It is the base of optimization design of welding machine.
数值模拟是分析和设计焊接变压器的有效手段，可作为进一步焊机优化设计的基础。
It shows that the numerical simulation is an effective method to analyze and design welding transformer. It is the base of optimization design of welding machine.
数值模拟是分析和设计焊接变压器的有效手段，可作为进一步焊机优化设计的基础。
应用推荐