The extensional simple shear model of the Chagan fault depression is established.
建立了查干凹陷发育的简单剪切模式。
Finally, the stresses of simple shear deformation are worked out to examine some constitutive relations.
最后，对新本构关系与其它理论的本构关系作了比较，计算了简单剪切变形的应力。
The different steels were strained by simple shear, uniaxial tension, Marciniak and equibiaxial stretching.
不同试样经简单剪切、单向拉伸、Marciniak和双向拉伸进行形变。
The testing method and the data analysis in this paper provide a reference for cyclic simple shear tests on dynamic properties of soil.
本文的试验方法和数据分析对使用循环单剪试验研究土的动力特性有较好的参考作用。
The orefield structure resulted mainly from simple shear progressive deformation, and tectonic deformation was in synchronism with mineralization.
矿田构造，主要是简单剪切递进变形的结果，构造变形与成矿作用同步。
The variation of tearing energy with crack size was calculated for the bonded crack of simple shear rubber using non-linear finite element analysis.
通过有限元分析方法模拟简单剪切橡胶件粘结处裂纹扩展时撕裂能与裂纹尺寸的关系。
The simple shear tests are conducted to study the shear properties of silty clay-concrete interface by using the improved cyclic simple shear testing system.
利用改进的循环单剪试验系统进行粉质黏土—混凝土接触面剪切性能试验。
This paper presents the drained test of saturated tailing sand in dynamic simple shear apparatus by measuring volume change of the sample under cyclic loading.
本文通过对饱和尾矿砂在振动单剪仪上的排水试验，量测了试样在周期荷载下的体积变化。
The simple shear extension mainly occurred in late Cretaceous-Early Paleogene, related to slab roll back of Pacific plate, decreasing Paleogene Pacific-Eurasia convergence rate and...
简单剪切发生在晚白垩世—早始新世，其动力与太平洋板块俯冲带的后撤、太平洋板块与欧亚板块之间汇聚速率的降低、以及先存北倾缝合带等密切相关。
The compound of Alkali Surfactant Polymer (ASP) is a kind of viscoelastic fluid, its rheological behavior can be formulated by power law model in simple shear flow within medium shear rate.
就其流变性而言，聚合物溶液和碱—表面活性剂—聚合物（ASP）复合体系均属粘弹性流体，但在中等剪切速率的简单剪切流动条件下，其流变性可用幂律模式描述。
This new shear has simple structure, reasonable stress, high rigidity, long service life and convenient maintenance compared with low shaft floatation disc fly shear.
与下轴浮动式圆盘飞剪相比，该新型剪机的结构简单，受力合理，刚度及剪刃寿命提高，且维修方便。
A simple formula for calculating pure shear strength of concrete is derived on the basis of the verified mathematical model of concrete failure surface, the elliptic paraboloid.
本文根据已论证过的混凝土破坏面，即椭圆抛物面的数学模型，报导出一个用以计算混凝土纯剪强度的简单公式。
Recumbent folding was formed by simple ductile-shear dynamics in the early stage, which was refolded by succeeding compression, showing the complexity of multiphase tectonics.
早期韧性简单剪切机制下产生的平卧褶皱，经后期挤压再次发生褶皱，显示构造运动的多期性与构造环境的复杂性。
The lead shear damper is a cheap device of energy dissipation that has superiority performance and simple structure.
铅剪切阻尼器是一种耗能性能优越、构造简单而又十分经济的耗能减震控制装置。
Some practical charts and simple formulas for figuring the amount of shear walls with different seismic intensity and site soil conditions are also given.
进而提出了在不同设防烈度及场地土条件下确定剪力墙数量的实用图表及简单公式。
This paper discusses also the shear strain modification of rectangular elements as well as a simple analytic method based on data from experiments.
并讨论了矩形单元的剪应变修正问题和基于试验资料而提出的简单分析方法。
The distinguishing features of the paper are selection of oblique strip and loading transmission, negative yielding line in irregular slab with simple supports, point support and shear split of slab.
本文的主要特点为有料向板条的选取及荷载传递、简支不规则板的负弯矩裂缝线以及点支承板条和板的剪切劈裂问题。
In this paper, the effect of shear deformation and rotatory inertia on the free vibration of a beam is studied. Thus a simple and accurate formula for the calculation of frequency is presented.
本文研究剪切变形与转动惯量对梁自由振动的影响，提出了简便、准确的频率计算公式。
The combined wave-current models are applied to the calculation of bed shear stress instead of the simple addition of wave and current.
计算海底剪切应力时应用波流共同作用模型，而不是纯波浪和纯水流两种情况下的剪切应力的叠加。
A simple and visual method is used tO give shear stress distribution in symmetrical section.
文中利用一个简单直观的方法，解出了对称截面情况下的剪应力分布。
For a complanate parallel chords truss, the axial forces of a member can be solved by the shear-diagram and two simple expressions.
借助与桁架对应的梁的剪力图和弯矩图根据两个关系式可直接求出一般平面平行弦桁架任一根杆件的轴力。
This chapter shows some laminate theories such as the Classical Plate Theory and the first Order Shear Deformation Theory and the High Order Shear Deformation Theory and it's simple forms firstly.
介绍用于复合材料层合板理论计算的经典层合板理论、一阶剪切变形理论以及高阶剪切变形理论及其各种简化形式，重点介绍了前两者理论。
The simple punch shear test method is recommended to determine static or dynamic shear strength of rocks.
笔者还建议使用简易的冲剪法去确定岩石的动、静力剪切强度。
Using the Simple High order Shear Deformation Laminate Theory and large deformation theory, the geometric nonlinear analysis of rubber rectangular composite laminate plate is presented.
文中应用简单高阶剪切层合理论和大变形理论对各向异性纤维增强的矩形橡胶复合材料层合板进行了几何非线性分析。
Finally, the simple and applicable formula is presented in order to calculate the shear wall's displacement indifference phases.
而后提出了用变系数的方法，计算结构在不同受力阶段位移的简化实用公式。
A simple analytical model is presented to predict the ultimate punching shear strength of square steel fiber concrete slab.
该文基于统一强度理论对钢纤维混凝土方形板的冲切承载力进行了理论分析，推导了冲切破坏强度的计算公式。
The main difficulty is to find a test method with simple specimen shape and loading style to cause different interface stress modes, that is, normal stress and shear stress dominated modes.
测量界面强度的主要困难在于寻求一种便于试验的试件形状和加载方式，使得界面上能够产生不同的应力状态，即在不同的剥离应力和剪应力比的状态下发生破坏。
The main difficulty is to find a test method with simple specimen shape and loading style to cause different interface stress modes, that is, normal stress and shear stress dominated modes.
测量界面强度的主要困难在于寻求一种便于试验的试件形状和加载方式，使得界面上能够产生不同的应力状态，即在不同的剥离应力和剪应力比的状态下发生破坏。
应用推荐