• Copolymerization is the optimization method for the preparation of silicone-modified polyurethane materials.

    共聚法是制备有机硅改性聚氨酯的最佳方法。

    youdao

  • The modified method and properties of silicone-modified polyurethane were reviewed, and the polyurethane's application was introduced.

    综述了有机硅改性聚氨酯的改性方法及性能,并简要介绍了其应用。

    youdao

  • The release layer 12 is formed by extruding a release-layer forming material containing a silicone-modified polyolefin resin in which silicone is chemically bonded to the olefin polymer.

    该剥离层(12)通过将包含有机硅与烯烃类聚合物化学结合的有机硅改性聚烯烃类树脂的剥离层成形材料挤出成形而得到。

    youdao

  • In this paper, the silicone modified polyether epoxy resin was prepared using silicone rubber, liquid epoxy resin and polyether by the method of blending modification.

    采用液体有机硅橡胶与低分子液态环氧树脂和聚醚共混改性的方法,制备了有机硅改性聚醚环氧树脂。

    youdao

  • The results showed that the average molecular weight of methyl hydrogen silicone, amine structure and Si content in amino modified polyether polysiloxanes have some effects on APEPS performance.

    结果表明,含氢硅油分子量、有机胺结构、氨基改性聚醚型聚硅氧烷的硅含量对APEPS性能有影响。

    youdao

  • The formulation, vulcanization and property of polyether rubber modified by silicone are described in this paper.

    本文介绍了有机硅改性聚醚橡胶配方、硫化及性能。

    youdao

  • The research progress of silicone adhesion promoter and the action of modified adhesion promoter are introduced. The application of adhesion promoter in coatings is focused.

    介绍了硅烷附着力促进剂研究的进展及改进附着力的作用,重点介绍了附着力促进剂在涂料中的应用。

    youdao

  • The result showed that silicone acrylate coatings modified by graft reaction did have excellent properties.

    结果表明:由接枝反应改性的有机硅丙烯酸酯涂料具有优良的性能。

    youdao

  • The thermal conductive coating was obtained with the epoxy modified silicone resin as matrix, and the mixture of silicone nitride and alumina as the heat conductive fillers.

    以环氧改性有机硅树脂为基体,氮化硅、氧化铝混合填料为导热粒子制备了导热绝缘涂料。

    youdao

  • This article introduces the development way and methods of leather chemicals including silicone modified acrylic resin, polyurethane, and forecasts the application prospects of silicone.

    本文阐述了有机硅改性丙烯酸树脂、聚氨酯等皮革化学品的开发途径和方法,同时对有机硅的应用前景进行了展望。

    youdao

  • A new concrete protective material was synthesized with acrylic resin modified by silicone. Some issues found in the process of synthesis were discussed.

    采用化学改性的方法将丙烯酸树脂用有机硅改性,合成了一种新型的混凝土保护材料,并就合成过程当中的一些问题进行了分析讨论。

    youdao

  • Application experiment results show that average molecular weight of staple methyl hydrogen silicone and si content of piperazine modified polyether polysiloxane have effects on PPEPS performance.

    结果表明:原料含氢硅油的平均相对分子质量、PPEPS的硅含量对其应用性能有影响。

    youdao

  • Conclusion: The wettability of 3 types of modified hydrophilic silicone rubber impression materials decreased after immersion in 4 kinds of disinfectant solutions.

    结论:3种改良型亲水性硅橡胶印模材料经4种消毒液不同时间浸泡消毒处理后,其表面润湿性均有所降低。

    youdao

  • It has shown, by use of FTIR analysis, that during copolymerization, silicone is grafted onto the acrylic polymer chain, and modified the properties of the copolymer resin.

    FTIR谱图分析表明,共聚过程中,有机硅氧烷已经接枝到丙烯酸酯聚合物分子链上,并且改变了共聚树脂的性能。

    youdao

  • The modified prosthesis was evaluated and refined, and processed to generate a realistic silicone prosthesis.

    修改后的假体进行了评估和细化,并处理生成一个逼真的硅胶假体。

    youdao

  • Silicone resin modified polyester(SP) is a kind of ultra-pure surface protection material used in semiconductor device.

    聚酯改性硅漆(SP)是用于硅器件表面保护的高纯绝缘材料。

    youdao

  • Hydrophobic silica gel was prepared by sol-gel process using tetraethoxy silicone(TEOS) as raw material, then the surface was chemically modified by diethoxydimethylsilane(DDS).

    以正硅酸乙酯为原料,经溶胶-凝胶过程制备二氧化硅溶胶,再利用二甲基二乙氧基硅烷(DDS)对其进行改性,制备了疏水性二氧化硅凝胶。

    youdao

  • Based on analysis and test, the silicone matrix resins modified by epoxy and borate etc was selected, which were confected an aero-dynamic heat-resist coating.

    通过配方设计,确定以环氧改性有机硅树脂为基体,以硼酸盐等为体质填料,按一定配比配制一种新型气动热防护涂料。

    youdao

  • The recent research progress in the silicone modified powder coatings is reviewed.

    综述了近年来国内外有机硅树脂在粉末涂料中的应用研究进展。

    youdao

  • The properties of three kinds of amino modified silicone oil made from different material were compared.

    比较了三种以不同原料制得的氨基硅油的性能。

    youdao

  • A novel nano-silica surface-modified by silane was used as a reinforcing filler for HTV(heat vulcanization) silicone rubber.

    采用表面经过硅烷偶联剂原位修饰的纳米二氧化硅增强硅橡胶。

    youdao

  • Polyurethane modified amino-silicone oil was synthesized by the reaction of amino-silicone oil and IPDI, and capped with saturated sodium hydrogen sulfite.

    用异佛尔酮二异氰酸酯与氨基硅油反应,然后用饱和亚硫酸氢钠封端,合成出具有反应性的聚氨酯改性硅油。

    youdao

  • Modified silicone with long chain acylate is synthesized by hydrosilation of PHMS and lauryl acrylate using chloroplatinic acid as the catalyst.

    以甲基含氢硅油和丙烯酸十二酯为原料,氯铂酸为催化剂,通过硅氢加成的方法直接合成了长链烷基酯改性硅油。

    youdao

  • The polyether modified silicone oil and the synthetic process thereof do not adopt solvents including toluene and has milder reaction condition and simple reaction process.

    本发明不采用包括甲苯在内的溶剂,并且反应条件更加温和,反应过程简单。

    youdao

  • The polyether modified silicone oil and the synthetic process thereof do not adopt solvents including toluene and has milder reaction condition and simple reaction process.

    本发明不采用包括甲苯在内的溶剂,并且反应条件更加温和,反应过程简单。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定