Road traffic control . traffic signal controller. functional specifications.
道路交通管理。交通信号灯控制器。功能规范。
Road traffic signal controller is an important device in urban traffic signal control system.
道路交通信号控制机是城市道路交通信号控制系统中的重要设备。
Finally, the traffic signal controller based DSP is designed, the hardware and software designs are presented.
最后，对基于DSP的交通信号控制器进行了软硬件设计。
The contact sensing signal controller consists of contact in the inner side end beam and sliding sheet in the circular inner side track.
接触传感信号控制器由触头和滑触片构成，内侧端梁外下端安装触头，内侧圆弧轨道的承载大梁上与触头接触部位安装有滑触片。
According to output control signals and feedback input test signal, the traffic signal controller can realize self-diagnosable function.
信号控制机能根据输出控制信号与反馈输入检测信号，实现信号控制机的自诊断功能。
Aiming at the problem of the local intelligence, this paper proposes a scheme by combination of embedded platform and signal controller.
针对实现信号交叉口本地智能化的问题，提出一种嵌入平台与信号控制机结合的方案。
The traffic signal controller is important for reducing the work intensity of traffic policemen and for increasing the traffic security of roadway.
交通信号控制机(简称信号机)，对减轻交警工作强度和维护交通安全畅通起着举足轻重的作用。
A kind of implementation of traffic signal controller based on DSP is suggested in this paper, and the detailed design of hardware and software is also introduced.
文中提出了一种基于DSP的交通信号控制机的实现方法，同时给出了具体的硬件、软件设计。
This paper presents the design and simulation of a multi-layer fuzzy logic traffic signal controller for an isolated intersection based on traffic demand intensity.
通过定量分析 ，首次构造了顾客价值的数学表达式 ，并以此为基础 ，探讨了市场需求与产品设计及商品化的联系 ，建立了需求强度模型。
This paper introduces an advanced traffic signal controller, which can not only implement multi-time block control, but also can be connected with network in order to realize on-line control.
介绍一种技术性能比较先进的交通信号控制机，这种信号机不仅能够自动地进行多时段控制，还可以接入网络实现在线控制；电路设计采用模块式的电路结构，可根据用户的功能需要增减模块电路。
The necessary shifts in signal phase are controlled via a dedicated beam steering controller or the architecture's central processor.
信号相位的必要相移通过专用波束调节控制器或集中安排的处理器进行控制。
In this case the controller sends out a FAILURE signal to the coordinator, thus invoking the compensatory activities in reverse order.
在本例中，控制器会将FAILURE信号发送给协调器，从而以反转顺序调用补偿活动。
Inject is an instance of One2OneChannelInt that will be used by the controller process to send a new multiplying factor (which also serves as a wake-up signal) to the device.
inject是One2OneChannelInt的实例，由控制器进程使用，用来向设备发送新的乘数(也充当唤醒信号)。
The twist in the tale is as follows: a second controller process exists in the system that can send a suspend operation signal to your device over a dedicated channel.
这个故事中介绍的方法是这样的：系统中存在着第二个控制器进程，它能通过专用通道向设备发送suspendoperation信号。
From the base station the signal is sent to the controller looking like this.
信号从基站发送到控制中心是这样的。
If the controller receives a SUCCESS signal from an activity, it sends a signal to the coordinator component (in this case PROPAGATE), thus invoking the next activity.
如果控制器收到了来自活动的SUCCESS信号，它会发送信号到协调器组件(在本例中是PROPAGATE)，从而调用下一个活动。
Once an activity completes it sends a signal (in this case either a SUCCESS or FAILURE) to the controller.
活动完成后，会发送信号(在本例中是SUCCESS或FAILURE)给控制器。
Notice in step 8 of Figure 3 that a FAILURE signal is sent back to the controller.
注意图3的步骤8中FAILURE信号被发送回控制器中。
If the controller has sent a suspend signal to the device, this event gets processed with the highest priority.
如果控制器向设备发送了suspend信号，那么这个事件以最高优先级得到处理。
Design the signal adjust circuit for sensor, and the power amplification circuit for the hydraulic pressure system of test platform and the controller of magnetorheological dampers.
设计出传感器输入输出信号调理电路和试验台架液压激振系统、磁流变阻尼器控制器的功率放大电路。
Derivative action (referred to by the letter d) measures and responds to the rate of change of process signal, and adjusts the output of the controller to minimise overshoot.
微分动作(字母d表示)测量并对过程信号变化率进行反应，调整控制器的输出以达到最小的突出峰。
If two signal importations of controller carry to merge the importation, its exportation will expand after carry use the matrix method conjunction 256 roads.
如果两个控制器的信号输入端并联输入，其输出端用矩阵方式连接后，将扩展成256路。
To satisfy the feed mechanism's real-time performance, the linear motor controller is designed based on Digital Signal Processor (DSP).
为满足进给机构控制系统实时性要求，设计了基于DSP的直线电动机控制器。
Shock sensor can detect excessive shock applied on a drive and send signal to VCM controller.
冲击传感器可以检测到驱动器上的过度冲击应用和发送信号，氯乙烯控制器。
Interfacing the 853 digital signal power controller with a computer allows the controller to be truly customized for any industrial heating application.
接口信号电源控制器与计算机的853数码允许控制器真正应用定制任何工业加热。
Combining the nonlinear control system theory and the aim of chaos synchronization, we designed a nonlinear feedback controller for synchronizing the scalar output signal of Chua's Circuits system.
把非线性系统的微分几何理论与混沌系统的同步控制目标相结合，设计了蔡氏电路混沌系统的标量混沌信号同步控制的非线性反馈控制器。
Combining the nonlinear control system theory and the aim of chaos synchronization, we designed a nonlinear feedback controller for synchronizing the scalar output signal of Chua's Circuits system.
把非线性系统的微分几何理论与混沌系统的同步控制目标相结合，设计了蔡氏电路混沌系统的标量混沌信号同步控制的非线性反馈控制器。
应用推荐