In addition, it is likely that small live animals in the advected water might be killed or stunned by thermal and/or chemical shock, thereby contributing to the food supply of vents.
此外，喷出水体中的小型活体动物很可能被热冲击和/或化学冲击杀死或击昏，从而增加了喷口的食物供应。
In addition, yawning when it is extremely cold may be maladaptive, as this may send unusually cold air to the brain, which may produce a thermal shock.
另外，在极度寒冷的时候打呵欠也许不大合适，因为这时通常会将冷空气送到大脑，从而使大脑发生热冲击。
Fracture toughness against pressurised thermal shock, do you know what a pressurised thermal shock is?
对抗高压热冲击的断裂韧性，你们知道什么是高压热？
But the phenomenon is pressurised thermal shock.
但是现象是高压热冲击。
The engineers suggest practical USES for the substance include thermal insulation, battery electrodes and products that need to dampen sound, vibration and shock energy.
工程师建议，这种材料可以实际应用于制造热绝缘物质，蓄电池极板，以及用在一些需要减噪减震及缓冲的产品上。
Thermal shock to the components will need to be considered with this method.
采用这种方法时需考虑对元器件的热冲击。
The dynamic thermal stresses responses analysis model problems of metal-ceramic functionally graded materials (FGMs) under thermal shock load are studied.
研究了梯度材料在承受热冲击载荷作用时的动态热应力响应分析模型问题。
Skin irradiation with high-power pulsed laser light induces a thermal shock which stimulates fibroblasts to produce new collagen.
其是利用高能脉冲激光照射皮肤，产生热震，刺激成纤维细胞产生新的胶原。
Thermal shock problem is always one of the most concerned questions in Solid mechanics theory field.
热冲击问题一直是固体力学理论研究的热点问题之一。
Once installed, they can help reduce energy costs and cycling times due to their high insulating capability, as well as serving to protect refractory surfaces from thermal shock.
安装之后，由于其绝热能力强，因而有助于减少能源费用及循环时间，并能保护耐火表面不受热冲击的影响。
Some characteristics of the rolls, such as strength vs. Thermal shock, tensile strength and contact fatigue strength, influence spalling. Thus, strength was investigated as a hardness parameter.
辊子的一些特性，例如：强度、耐热性、抗拉强度、接触疲劳强度都和剥落有关。因此，强度可作为硬度的参数来研究。
This paper presents a simple analytical method solving the dynamic stress response in a solid sphere under thermal shock.
本文提出一种简便的解析方法求解实心球体在热冲击载荷作用下的动应力响应。
It was shown that the dynamic effect of the temperature and thermal stress of piston must be considered during thermal shock.
计算结果表明：活塞在热冲击期间表现的温度及热应力的动力学效应是必须加以考虑的。
RA330 is an austenitic heat and corrosion resisting alloy offering an exceptional combination of strength and resistance to carburization, oxidation and thermal shock.
该耐热合金ra330是奥氏体耐热及耐蚀合金产品，有额外的组合强度且耐渗碳、耐氧化和耐热冲击。
The crack formation of thermal shock fatigue is related to the nucleation, growth and join of microvoid.
热冲击疲劳裂纹的形成与微孔洞的形核、长大和连通有关。
This tough alloy successfully resists the effects of prolonged high operating temperatures, hard water, acids, corrosion, and thermal shock.
这种特别耐用的合金能够成功地抵抗长时间高温、硬水、酸、腐蚀物和热冲击所产生的破坏作用。
The formation mechanism of thermal shock fatigue crack of cemented carbide YG10 was investigated.
研究了YG10硬质合金热冲击疲劳裂纹的形成机制。
The results were compared with the results of thermal shock of plate.
本文结果同平钣热冲击的结果作了比较。
They are widely used in the analysis of dynamic processes of various physiochemical reactions and fine processing with minimal thermal shock.
它已广泛应用于物理化学反应的动力学过程分析和热效应可忽略的超精细加工。
The optimism design of thickness for this cladding material is helpful to improve the performance of thermal shock resistance.
对硬质覆层材料的厚度进行优化设计有助于其抗热震性能的提高。
Adding 7% cordierite, 7% flint clay and 2% quartz sand in matrix enabled the castable to have highest thermal shock resistance.
基质中同时引入7%的堇青石、7%的焦宝石和2%的石英砂时，浇注料的抗热震性最好。
The material had high emissivity, high bond strength and thermal shock resistance, it was a mew ceramic material of high efficiency and saving energy.
这种材料具有高辐射率、高粘结强度、抗热震性能好等特点，是一种高效节能的陶瓷新材料。
Meanwhile it also exhibits some properties of ceramics such as excellent mechanical properties, high temperature stability, good resistance to thermal shock and high temperature oxidation.
而另一方面它又具有陶瓷材料的某些性能，如具有较高的屈服强度、高热稳定性和良好的抗热冲击性和高温抗氧化性。
This article reviews the study status of the theories and mechanisms for thermal shock resistance and their shortcomings, and Outlines the methods for improving thermal shock resistance.
概述了结构陶瓷抗热震性理论、抗热震机理研究现状及存在的问题，并概述了目前提高材料抗热震性能的方法。
Mechanism of damage of clay pot for utensil glass melting, such as softening deformation at high temperature, corrosion by molten glass, crack by thermal shock, etc was studied.
对熔化器皿玻璃等的粘土质坩埚使用中的高温软化变形、玻璃液侵蚀、热震开裂等损毁机制进行了分析研究。
However, exceptional thermal shock curve expressed by electrical resistance only occurred to drop in the initial stage.
个别电阻表征的热震损伤曲线仅在初始阶段损伤有下降现象。
The thermal shock failure of ceramic coating is essentially the fatigue failure induced by cyclic thermal stress during repeated heating and cooling.
陶瓷涂层的热震失效是由于涂层在循环加热和冷却过程中，涂层内产生循环热应力，导致涂层发生热疲劳失效。
It was indicated that the higher laser energy input is harmful for thermal shock lifetime of LR TBCs.
能量密度较小的激光重熔试样具有高于等离子喷涂试样的热震寿命。
But the densification of ceramic materials is vitally important to mechanical, thermal shock and fatigue properties.
但是，陶瓷材料的致密化对其力学、抗热震和热疲劳性能有至关重要的影响。
But the densification of ceramic materials is vitally important to mechanical, thermal shock and fatigue properties.
但是，陶瓷材料的致密化对其力学、抗热震和热疲劳性能有至关重要的影响。
应用推荐