Ductile iron shows exceptional resistance to shock loading.
球墨铸铁具有特别的抗冲撞装卸的性能。
Avoid shock loading and high overloads during mill operation.
轧钢时，避免冲击负荷及过负荷运作。
This filter is more resistant to some types of shock loading.
这种滤池较能忍受某些冲击负荷。
The shear fracture phenomena of HR-2 steel tube under shock loading were studied.
介绍了对HR 2抗氢钢圆管在内爆压缩加载过程中的剪切断裂现象的初步研究结果。
The process has higher capacity in resistance to shock loading and will be widely applied in future.
该工艺具有较强的抗冲击负荷能力，应用前景广泛。
The process was characterized by steady operation, resistance to shock loading, and low operating cost.
该工艺具有运行稳定、耐冲击负荷、运行成本低的特点。
Experimental investigation were carried out on dynamic failure strain of submarine steel under shock loading.
试验研究了潜艇艇体用钢在爆炸冲击载荷作用下的动态极限应变。
Shock loading can also affect braking and acceleration torques though, again, such effects are speed-dependent.
冲击负荷也会影响刹车和加速扭矩虽然再次，这种影响是速度依赖性。
Moreover, bio-augmentation makes the activated sludge take on better physiological activity and anti-shock loading capability.
此外，生物强化使活性污泥具有更好的生理活性和抗冲击负荷能力。
Due to the action of strong shock loading induced by underwater explosion, the concrete dam will be damaged in different degrees.
由于水下爆炸强冲击作用，混凝土大坝将会产生一定程度的破坏。
MD simulations are carried out to study spallation in solid and liquid copper incuded by planar shock loading at exteme strain rates.
本文借助分子动力学模拟研究了极高应变率下固体铜和液体铜由平面冲击导致的断裂。
Dislocation and plastic deformation was produced in crystal material under shock loading. phase change could occur when shock loading was strong.
在冲击加载下，晶体材料中产生了位错和塑性变形。在强冲击时还可出现相变变化。
Principles and methods for measuring dynamic behavior of rock under shock loading and unloading by shock reverberation technique are described briefly.
本文简述了用反射体法研究受冲击加载和卸载时岩石力学性质的力学原理和试验方法。
Start-up time was shortened and the ability to resist shock loading was strengthened in the bioaugmented SBR system in comparison with the control system.
投加固定化菌的强化SBR系统较不加固定化菌的对照系统具有启动时间短，耐冲击负荷能力强的特点。
MIRANDA MS2is recommended for USES in the parts under high friction and shock loading in heavy-duty vehicles and also for heavy loading mechanical equipment.
万灵达ms2推荐应用于重型车辆的高度磨擦及振动负荷的部位，碳酸盐也适合于其他重负荷机械设备。
MIRANDA MS3 is recommended for uses in the parts under high friction and shock loading in heavy-duty vehicles and also for heavy loading mechanical equipment.
万灵达MS3推荐应用于重型车辆的高度磨擦及振动负荷的部位，也适合于其他重负荷机械设备。
The advantages of these biotechnologies are relatively low cost and high efficiency, simple and practical, easy operation with good resistance to shock loading.
三项生物技术的共同特点是高效快速、低耗节能、简易实用、管理方便且能耐受高负荷污水的冲击。
Microscopic features of dynamic fracture of tungsten alloys under shock loading, as well as their relationship with the ductility_brittleness transition were discussed.
并结合断口分析，探讨了钨合金在冲击作用下发生断裂的微观特征与韧脆转化间的关系及其物理本质。
The shock initiation process of the JOB-9003 explosive under different initial shock loading was recorded by using the multiple electromagnetic particle velocity gauge method.
采用组合式电磁粒子速度计技术测试了不同初始冲击压力条件下JOB-9003炸药的冲击起爆过程。
The CIIE process can serve to adjust the influent quality and alleviate shock loading, so as to improve the shock resistance capacity and stability of operation in the whole system.
采用微曝气催化铁内电解法预处理对进水起到了缓冲和水质调节的作用，可提高整个系统的抗冲击负荷能力和运行稳定性。
The result of experiments under shock loadings revealed that the constructed wetlands had a strong resistance to shock loading, and it could bear shortterm load of high concentration.
人工湿地在冲击负荷条件下的实验结果表明，该人工湿地能承受短时高浓度冲刷，耐冲击负荷能力强。
It synthesizes the characteristics of activated sludge processing and SBR in combination with a biological selector, shock loading and fluctuations in the influent can be completely buffered.
它综合活性污泥法和SBR工艺特点，与生物选择器原理结合在一起，具有抗冲击负荷和除磷脱氮功能。
The failure wave phenomena in glass media under shock loading are analyzed. The propagating mechanism and dynamic characteristics of failure wave and the property of failure layer are revealed.
分析了玻璃材料在高速冲击条件下的破坏波现象，对破坏波的传播机制及其动态特征以及破坏层的性质进行了研究。
As a prosperous method for material science research, the technology of shock wave loading is becoming more and more emphatic.
冲击波加载技术作为一种极具潜力的材料科学研究手段正逐渐为人们所重视。
Upon the analysis to the behavior of the deflector under the instantaneous shock type external loading, the paper simplified the structure calculation model.
在分析了导流器承受瞬间冲击型外负荷的作用特性后，对结构计算模型进行了简化；
General loading condition of rolling mill bearings is medium - heavy load and shock load, thus the most suitable material is carburising bearing steel.
轧机轴承一般载荷条件是中重载荷和冲击载荷，因此，最适用的材料为渗碳轴承钢。
This paper is to study the super-pressure loading and recovery device that can intensify the shock wave based on the principle of quasi-spherical converging shock wave.
本文旨在利用准球面汇聚冲击波原理，研究能够产生超高冲击压力的准球面汇聚冲击波加载回收装置。
For medium and slow speed bearings operating under heavy load or shock-loading conditions.
适用于重负荷或振动工况下操作的中速或低速轴承。
It is introduced how to regulate the process and restore a normal operation of the sewage treatment system on condition of a loading shock.
在此介绍了针对负荷的冲击，如何调整工艺，恢复污水处理系统正常运行。
The A/O MBR had a strong ability to loading shock.
该系统具有较强的抗冲击负荷的能力。
应用推荐