I find that a slightly transparent shell gives a better effect, so by default this value is 225 (out of 255 which is a solid [opaque] shell).
一定透明度的shell将提供更佳的效果，所以默认该值是225(255则为一个完全[不透明]的shell)。
It was modeled with 102,109 nodes and 109,834 elements, including beam, shell, solid and spring elements.
整个模型共有102,109个节点，109,834个单元，包括壳单元，体单元、梁单元、弹簧单元等单元类型。
This article introduces a designing means of mold of the fibre winding solid rocket motor combustion chamber shell.
介绍一种固体火箭发动机燃烧室壳体纤维缠绕芯模的设计。
The reason for generating the false stress in a transition element connecting a solid element to a thin shell element for stress analysis is considered.
分析了体—壳过渡元中产生“虚假应力”现象的根本原因，给出了两种改进方法。
The solid feel of the car's shell is impressive.
这辆汽车的外壳给人的感觉异常坚固。
GA to resolve process route optimization of solid rocket motor shell is studied.
研究了基于遗传算法的固体发动机壳体工艺流程面向成本优化问题。
These designs include single shell, double shell, solid, coated and electrically heated rolls.
各种设计包括单壳，双壳，坚固型，带涂层和电热辊。
When it choose a place to set up home, it pokes its tongue-shaped foot out of its shell and presses it against a solid surface.
当贻贝选择一个地方建造自己的家时，它就会将它的像舌头一样的脚伸出它的贝壳外，把脚紧紧按压在一个固体的表面上。
Double concentric cylindrical shell with solid floor and added longitudinals on the pressure tank shell is a very good structural form of new pressure tank.
指出了液舱壳板加纵骨的全实肋板同心双层圆柱壳是一种优良的耐压液舱新型结构型式。
As an example, the strength of a solid fuel rocket engine shell is calculated.
作为一个例子，计算了一个固体火箭发动机壳体的强度。
The results show that due to the strong jet impingement on the narrow face in mold, solid shell near the impingement point is very thin.
研究表明，钢液对结晶器窄面的冲击严重，导致在冲击点附近的凝固坯壳较薄。
This wafer level chip size package (WL-CSP) process encases the die in a solid die-size glass shell.
圆片级芯片尺寸封装（WL-CSP）工艺是在固态芯片尺寸玻璃外壳中装入芯片。
This element can be used as solid element and can also be used to model thin curved shell structures.
该单元既可用做实体单元，又可模拟薄曲壳结构，在厚跨比非常小的情况下也能获得令人满意的精度。
The coating compositions are particularly suited for forming shell coatings on solid pharmaceutical dosage forms.
该包衣组合物尤其适用于在固体药物剂型上形成衣壳包衣。
The basic fluid-solid interaction formulas for a shell in fluid are given using elasticity theory of thin shells and fundamental equations of fluid mechanics.
应用薄壳弹性理论及流体力学基本方程，给出了圆柱壳在流体中流固耦合问题的基本关系式。
The finite element method (FEM) model was established to predict the temperature field, shell growth and solid fraction of the heavy rail bloom caster.
采用有限元方法，对某钢厂的重轨钢大方坯连铸机的凝固过程温度场分布情况、坯壳生长规律和凝固率进行了模拟研究。
This paper is concerned with a numerical solution of hyperbolic cooling tower shell, a class of full nonlinear problems in solid mechanics of considerable interest in engineering applications.
本文采用有限元数值分析方法对土木工程中的大型钢筋混凝土双曲冷却塔壳的非线性稳定问题作了具体的数值计算。
With the design of the injection mould for the top shell as an example, the whole process of the computer_aided design of the injection mould for based on MDT parameterized solid modeling was stated.
以上壳注射模设计为例，介绍了基于MDT参数化实体造型的上壳注射模计算机辅助设计的全过程。
Abstract : In this paper, preparation and characterization of activated carbon from palm shell, a biomass solid waste, by sodium hydroxide (NaOH) treated at different stages were studied.
摘要 ：利用生物质废料——棕榈壳，采用不同的浸渍方法制备高效活性炭。
The flow of metal in cast rolling area (liquid metal, sticky metal and solid shell) is an uneven medium flow.
铸轧区金属（液态金属、粘糊状金属和冷凝壳）的流动为非均匀介质流动。
Soft pitch is a black solid at a certain temperature , it will be solidified into a brittle solid with shell-like fracture.
常温下为黑色固体，在一定的温度下凝固成很脆的具有贝壳状断口的固体，呈玻璃相；
The shell construction of the facade consists of solid brick walls, reinforced concrete ceilings and floors, and steel encased concrete columns.
该建筑的外壳采用实心砖墙，钢筋混凝土天花板，地板，钢筋混凝土柱。
Be adapt to covey heavy abrasion, high-concentration dreg, heavy solid-liquid pump's body is used double-deck construction, in other words, being made of inside lining and outside shell.
为适应输送强磨蚀、高浓度渣浆的要求，重型固液泵的泵体采用双层泵体结构，即由内衬和外壳两部分组成。
The utility model discloses a liquid-filled convex lens which is an optical convex lens formed by transparent liquid filled in a convex hollow transparent solid outer shell.
充液凸透镜，是用透明液体充进凸型空心透明固体外壳中而形成的一种光学凸透镜。
According to Finite Element Method, the impactor is considered as a discrete mass system in terms of 3D solid element with initial velocity, and 2D shell element is used for target plate.
首先采用有限元法，将撞击体离散成由三维实体单元构成的具有一定初始速度的离散质量系统，对靶板采用二维壳单元离散。
And based on the research result, two kinds of solid-shell connecting methods are utilized and combined in modeling the jacking frame.
在以上研究的基础上，在固桩架有限元模型的建立过程中灵活地结合运用了两种体—壳连接的方法。
And based on the research result, two kinds of solid-shell connecting methods are utilized and combined in modeling the jacking frame.
在以上研究的基础上，在固桩架有限元模型的建立过程中灵活地结合运用了两种体—壳连接的方法。
应用推荐