The silver- colored ring around the center of the core is at the shear line.
在锁芯中央的银色金属片就是切线!
There is a shear line between the total magnetic field and the component magnetic field.
总磁场和分磁场之间存在着依赖于磁路最短原则的切变线。
When the shear line vapour band is weak, and the Plateau shear line will move southeastward.
切变线水汽带减弱时,高原切变线东南移。
S. cross-cuting shear line, and the formation of the looper and its control process is also introduced.
横切机组活套和最小板间距的计算方法。同时也介绍了活套的形成及控制过程。
The second one was produced by a mesocyclone , which developed along the shear line, and the strong convergence.
第二阶段暴雨是由切变线上的强辐合及切变线上形成的边界层中尺度气旋造成的。
In this photo, the plug of a KIK cylinder has been drilled at the shear line, allowing the plug to freely rotate.
在图片中,一个KIK锁芯在切线处被钻孔,以便让锁芯自由的转动。
The major systems come from the shear line of low-layer, the low trough of upper air and the ground stationary front.
主要影响系统来自低层切变线、高空低槽和地面静止锋;
The results show that upper trough and shear line and thermal depression are main synoptic systems introducing summer sand-dust storm.
研究发现高空小槽、切变线、热低压是引发夏季沙尘暴的主要天气系统。
The forming and maintaining of K-H instability was an important reason of causing vortex on the shear line maintain, strengthen, and causing rainstorm.
不稳定的形成和维持,是导致中尺度切变线上小尺度涡旋维持、加强,并产生强风暴雨的重要原因。
The results showed that there was a mesoscale vortex tube along the mesoscale shear line on the middle low troposphere, and its altitude varied in a wave shape.
发现沿切变线走向有一条中尺度涡管,位于对流层中低层,高度呈波状起伏。
The following conclusions can be drawn. 1. The main influence systems of causing this heavy rainfall are southwest vortex, shear line and southwest low-level jet.
低涡切变线、西南风低空急流、东风气流和地面倒槽是本次暴雨的主要影响系统,该地区维持高能,饱和,位势不稳定的小环境,有利于特大暴雨的产生和维持。
Analysis of surface stream and energy fields obviously showed that the squall line occurred behind the surface shear line, and before the convergence area of wind.
地面流场和能量场的分析明显反映出了飑线在地面切变线后部,风向、风速辐合区前部。
The rain storm activities relate to the mesosynoptic systems such as the mesoscale shear line, the mesoscale convergence line and the mesoscale convergence center.
雨团活动与中尺度切交线、辐合中心、辐合线等中尺度天气系统相配合。
The results showed that the process was happened by the reasons of atmosphere energy accumulating continuously and unstable energy releasing touched off by shear line in lower level.
结果表明:这次冰雹天气过程是由于低层大气能量不断积累、低空切变线触发不稳定能量释放而产生的。
The heavy rainfall is dominated by a mesoscale warm shear line, having a closed relationship with a mesoscale system composed by mesoscale shear line, thunderstorm high and mesoscale vortex;
这次强降水与中尺度切变线、雷暴高压和中尺度气旋等中尺度系统关系密切,为一次中尺度暖式切变线暴雨过程;
Some tests with many sorts of metals combination under symmetrical impact explosion welding were studied, and a sort of flying line-adiabatic shear line in those metals combination was obtained.
摘要进行了几种金属组合的对称碰撞爆炸焊接试验。获得了这些金属组合中的飞线—绝热剪切线。分析了这种飞线产生的工艺、原因、性质和影响。
The cold and warm currents meet at the southern side of the shear line and the left side of the low-level jet stream to produce an upward movement of intensive convergence and trigger the rainstorm.
冷暖气流在切变线南侧、低空急流左侧交汇,产生强烈辐合上升运动,触发了强降水。
This method can be used in other shear stiffness calculations for straight line truss.
所述分析方法可推广到其它直线桁梁的抗剪刚度的计算。
By unfolded the Lateral Shear Interferometer, the relationship between the line pairs and the tilt of strip with the tilt of reflected mirrors was derived.
通过将横向剪切干涉仪光路展开,得出反射镜角度变化与干涉条纹倾斜角和线对数变化之间的关系。
The control of fixed length cutter for high speed flying shear with double rollers is one of the problems which is needed to solve in the processing line for cutting hot plate blank.
高速飞剪的定长切头控制是热板坯剪切线中需要解决的课题之一,本文着重介绍了定长切头的意义、控制思想及控制方案,并对部分参数进行模拟计算。
The cut principle and feature of the rolling cut trimming shear were set forth, and the application of rolling cut placed on cutting line for the heavy plate mill at home were analyzed.
简述中厚板剪切机的基本类型和特点,对滚切剪的剪切原理和特点进行阐述,分析了国内中厚板厂剪切线滚切剪的应用。
The distinguishing features of the paper are selection of oblique strip and loading transmission, negative yielding line in irregular slab with simple supports, point support and shear split of slab.
本文的主要特点为有料向板条的选取及荷载传递、简支不规则板的负弯矩裂缝线以及点支承板条和板的剪切劈裂问题。
The Reliant PowerSlit line of Slitter Rewinders offers the full range of slitting solutions from shear cutting, razor, score, hot knife, and ultrasonic.
瑞里恩特公司的分切复卷机系列生产线提供全套的分切解决方案,包括剪切割,剃,划线,热刀和超声波。
Longitudinal shear problems of collinear periodical rigid line inclusions at the interface of dissimilar materials were dealt with.
研究了不同材料界面含周期刚性线夹杂的纵向剪切问题。
Where the flux line lattice moves perpendicular to the filament direction, the data show that the shear modulus, C66, governs the flux pin.
当磁通线阵运动垂直于细丝方向时,其数据表明剪切模量C _(66)主要起针扎作用。
A method is presented, by which the plane strain state on the earth's surface can be obtained with the combination of tidal line strain data and the tidal shear strain can be simulated numerically.
提出了由潮汐线应变的组合观测资料获取地表平面应变状态和对潮汐剪切应变进行数值模拟的方法。
Multi vertical line element model is the most widely used model in the nonlinear analysis of shear wall structures.
多垂直杆元模型是目前最为常用的一种用于剪力墙结构非线性分析的宏观模型。
The action match of the equipments such as: Shear the line, clip the line and work to position etc. automatically all from the programmable preface controller control.
设备的动作配合如:自动剪线、夹线、工作定位等均由可编程序控制器联机控制。
The paper introduced the quick cutter-blade changing unit of fixed length flying shear in rod rolling line.
介绍了一种棒材车间定尺飞剪机刀片快速更换装置及其使用方法。
The paper introduced the quick cutter-blade changing unit of fixed length flying shear in rod rolling line.
介绍了一种棒材车间定尺飞剪机刀片快速更换装置及其使用方法。
应用推荐