Using actual testing data, this paper discusses the effect of the residual cohesion upon the horizontal pushing shear testing result and present method of correction.
本文利用实测资料，探讨了残余内聚力对水平推剪试验结果的影响，并提出了修正方法。
The most commonly used lateral force resisting system (LFRS) for rectangular all-wood or low-rise masonry and wood buildings is the shear wall mechanism combined with horizontal diaphragms.
矩形全木房屋或低层砖石木建筑物最常用的侧向力抵抗系统（LFRS ）是剪力墙机制，并结合横隔使用。
The baroclinity formed by the horizontal temperature gradient is the main reason for the formation of the wind shear.
水平温度梯度形成较强的斜压性是形成边界层风切变的主要原因。
The main seismic performance is introduced, including low level period, top displacement, maximum layer displacement Angle, frame bearing horizontal shear, frame bearing earthquake overthrow moment.
抗震性能包括对结构低阶自振周期、顶点位移、最大层间位移角、框架承担承担水平地震剪力、框架承担地震倾覆力矩比几个方面。
Considering the deformation of short cylindrical tank under the horizontal earthquake action, the shear effect is the main factor, therefore, it might be anal zed by shear beam deformation theory.
考虑到在水平地震作用下短圆柱形容器的变形，剪切效应起主导作用，因而可用剪切梁变形理论来近似地代替。
This article analyzed the problem about the reasonable choice of horizontal blade gap while double_sides rotary cutting shear and rotary cutting length shear to cut steel plates.
分析了滚切式双边剪和定尺剪剪切钢板时剪刃水平间隙（以下简称剪刃间隙）的合理选择问题。
Relation between the horizontal shear stress and lateral plastic deformation and relation between the vertical shear stress and axial plastic deformation are presented, respectively.
建立了水平剪力与侧向塑性变形及垂直剪力与轴向塑性变形的理论关系。
Based on the shear wave formulation, this paper presents a new method to calculate horizontal seismic responses of multistory shear type structures.
基于结构侧向位移的剪切波动方程，提出分析多层剪切型结构水平地震反应的新方法。
Experiments were carried out to investigate the developing length due to the wall shear stress in horizontal air water two phase bubbly flows.
在水、空气实验回路上对水平管内气液两相泡状流的壁面切应力进口段进行了实验研究。
The horizontal shear was taken as the main earthquake action in earthquake response analysis for subway tunnel.
在以往地铁隧道的地震反应分析中，地震作用一般以水平剪切为主；
Horizontal shear strength and bending properties of three kinds of laminated veneer lumber i . e. wood laminated veneer lumber, wood-bamboo LVL and wood-twisted bamboo bundle LVL are tested.
通过试验对比了不配置竹束、配置不加捻竹束、配置加捻竹束3种单板层积材的水平剪切强度和弯曲性能。
This paper provides a method for reinforced concrete shear wall structure optimization design under horizontal earthquake, and for engineering and technical personnel some degree of reference value.
本文为水平地震作用下钢筋混凝土剪力墙结构的优化设计提供了一种方法，对工程技术人员亦有一定的参考价值。
The structural behaviors under vertical and horizontal loads are analyzed with a steel frame model and an equivalent reinforced concrete frame-shear wall model respectively.
用纯钢框架模型和等效钢筋混凝土框架剪力墙模型分别计算结构在竖向荷载及侧向荷载组合下的受力性能。
The influence of inclined struts on the elastic properties under axial, bending, and shear deformations as well as the impact of axial deformation of horizontal struts were considered comprehensively.
综合考虑了胞体中斜支柱的轴向、弯曲和剪切变形以及水平支柱的轴向变形的影响，利用最小势能原理得到了材料的弹性性能与各向异性比及相对密度的关系。
Some kinds of joint types for horizontal connection of shear wall and beam connection are also introduced in detail.
剪力墙水平连接及梁连接分为多种节点形式。
There may be widespread changes in ground elevation as well as horizontal or shear displacements.
标高可能发生广泛的变动，也可能发生水平位移或剪切位移。
Moreover, it is the floor that makes the two neighboring trusses work together, and the horizontal shear forces are transferred by the tension field within it.
同时试验现象也表明，楼板在协调相邻两榀桁架共同工作时起了重要的作用，其水平剪力在楼板中的传递是通过楼板中的拉力场来实现。
In this paper, shear failure is mainly discussed, especially the horizontal shear-bond failure.
本文针对剪切破坏的主要破坏模式纵向水平剪切粘结破坏。
A longer holding time of ultrasonic wave causes a horizontal localized shear region.
超声时间的延长在金丝球内产生水平剪切层。
On the basis of the concept of the vertical crooked arm in material mechanics, a quantitave analysis of the distribution and evolution of horizontal shear stress in vertical folding is discussed.
根据材料力学纵弯杆概念，从定量角度分析了横向剪应力在纵弯褶曲中的分布和演化。
The effect of vertical and horizontal reinforcement on shear strength of the type of …
并从理论上研究了竖向和水平配筋效应问题。
Reasonable design of shear connector need availably control of horizontal shearing force between steel webs.
合理地设计抗剪连接件需要有效地控制钢腹板和混凝土材料之间的水平剪切力。
ETM data reveal that the Yuanmou fault is mainly characterized by horizontal left-lateral and shear strike-slip, including ringent shear and pressed shear in part.
ETM影像揭示了元谋断裂以左行剪切走滑为主，局部张剪或压剪的性质。
The horizontal shear may intensify the scale effect. The fracture pressure has little influence on scale effect.
水平剪力明显加剧了尺度效应，裂隙压力对尺度效应的影响甚微。
Compressive stress produced by horizontal prestressing tendons within the raft foundation has much to do with the effective prestress and punching shear capacity.
在考虑应力扩散的影响对抗剪有效作用下，提出了预应力筏板基础边柱合理的抗冲切承载力计算公式。
The crust is constituted by the rock and a surface layer of soil with depth H over it. The incident seismic wave is a vertical SH shear wave to cause horizontal ground motion.
地壳由半无限大的基岩上一层厚度为H的表土层组成，入射地震波为垂直的SH波，产生水平地面运动。
The crust is constituted by the rock and a surface layer of soil with depth H over it. The incident seismic wave is a vertical SH shear wave to cause horizontal ground motion.
地壳由半无限大的基岩上一层厚度为H的表土层组成，入射地震波为垂直的SH波，产生水平地面运动。
应用推荐