A double trapezoidal specimen will generate shear debonding.
双梯形的试样将产生切变脱胶现象。
By shear testing investigation, the influencing laws of different interfacial agents on new old concrete bonding shear property are obtained and the double factors variance analysis is presented.
通过剪切试验研究，得出了不同界面剂对新老混凝土粘结剪切性能的影响规律，并进行了双因素方差分析。
Now, the friction coefficient is generally got from gouge test by using the double shear method.
目前，断层摩擦系数主要是应用双剪法对采自断层的断层泥进行实验室测试和研究而取得的。
This article studies the influence of the bolt tightening torque on the fretting damage of LY12CZ aluminium alloy double shear lap bolted joint by experimental and conumerical analysis.
从试验和数值分析两个方面研究了螺栓预紧力矩对LY12CZ铝合金双盖板对接螺纹联接件微动损伤的影响。
Shear theory was used to analyze stress distribution on double cutting of brown rice and cooked rice.
应用剪切理论分析了稻米及米饭的双面剪切的应力分布。
The paper proposes a new method for calculating shear plane area based upon a new oblique cutting model with double edge.
根据新的斜角非自由切削模型，本文提出了新的剪切面积计算方法。
The significance of shoulder force statistical measurement is explained, and a sys- tem with double- shear beam stain gage force transducer for measuring the shoulder- force is introduced.
介绍了立姿射击的抵肩力统计测量的意义及采用双剪切梁式应变测力传感器测量抵肩力的系统组成；
In designing and calculating, several measures such as using the indexes of residual shear strength of sliding-belt soil and double-parameter method etc are ta.
为提高计算结果的可靠度，采用了滑带土的残余抗剪强度指标和双参数法等手段。
The control of fixed length cutter for high speed flying shear with double rollers is one of the problems which is needed to solve in the processing line for cutting hot plate blank.
高速飞剪的定长切头控制是热板坯剪切线中需要解决的课题之一，本文着重介绍了定长切头的意义、控制思想及控制方案，并对部分参数进行模拟计算。
And shear wall moldboards use the construction crafts of the large moldboards. In addition to these, in site cast plates and beams adopt construction crafts of double faced bamboo glue moldboards.
剪力墙模板采用大模板施工工艺，现浇板及梁采用双面竹胶模板施工工艺。
The operational principles and structural feature of double headed rotary shear have been introduced simply.
简要介绍了一种新式圆盘切边剪——双头回转式圆盘剪的工作原理和结构特点。
The double shear specimen was designed for the study of the creep behavior of nickel base single crystal superalloys at high temperature.
双剪切试样是设计用于研究镍基单晶超合金的蠕变问题。
And this conclusion has also been verified by double shear creep deformation.
此结论进一步得到一种带缺口剪切蠕变试验的验证。
A new structural design method of steel core concrete columns using double beams nip column and shear bolts is presented in this paper.
工程中采用的双梁夹柱、穿心承重销方案为确保梁柱节点传力可靠、施工方便提供了一种简洁实用的方法。
With your object selected double-click on the Shear tool and shear the object 30 degrees.
选中对象，在倾斜工具上双击，对象倾斜30度。
Martensite transformation according with the character of double-shear in GT modal and (113) habit planes was testified.
马氏体相变符合GT模型的双切变特征，惯习面为(113)面。
In the present paper, an experimental and analytical study of effects of jointed member stiffness on the fastener load distribution is performed for double-shear, multiple-bolted joints of composite.
通过试验和有限元分析研究被连接元件的相对刚度对多钉双剪连接钉载分配的影响。
In designing and calculating, several measures such as using the indexes of residual shear strength of sliding-belt soil and double-par...
为提高计算结果的可靠度，采用了滑带土的残余抗剪强度指标和双参数法等手段。
In this paper a double hardening model with two hardening parameters (i. e. plastic volumetric strain and shear strain) and a single smooth yield function has been proposed.
本文中建议了一个包含塑性体应变和偏应变两个硬化参数的封闭屈服面模型，可以同时应用于正常固结土和超固结土。
Based on the double stress of steel fiber reinforced concrete (SFRC) composite beams and their material performance, a law of shear stress redistribution in SFRC composite beams is studied.
基于二次受力迭合梁斜截面受力性能和钢纤维混凝土材料特性，分析了钢纤维混凝土迭合梁截面的剪应力分布规律。
Research on the formula for blade gap regulating of slitting double-sided shear and length shear;
滚切式双边剪是宝钢厚板厂切边的主要设备，其剪刃间隙与边部质量的好坏关系密切。
Results shows that all these three methods can be used to measure the shear strength of explosion cladding interface, and the most practical one is the double-notch method using symmetry specimen.
最后分别对3种方法进行了测试试验。结果表明，3种试验方法均能有效测试爆炸复合接头的剪切强度，其中对称试件双切口拉伸法最适合实际应用。
Results shows that all these three methods can be used to measure the shear strength of explosion cladding interface, and the most practical one is the double-notch method using symmetry specimen.
最后分别对3种方法进行了测试试验。结果表明，3种试验方法均能有效测试爆炸复合接头的剪切强度，其中对称试件双切口拉伸法最适合实际应用。
应用推荐