The increase of the wheel speed, the swing frequency and the feed of shaft direction conduce to improving the grinding efficiency.
增加砂轮转速、砂轮摆动和轴向进给量可以提高单晶金刚石的研磨效率。
By changing the speed of grinding wheel, its swing frequency and the feed speed of shaft direction, different experiment results were got.
通过改变砂轮转速、砂轮摆动频率、轴向进给量，获得了一些具有对比性的试验结果。
The appearance of mesosphere solidification and shaft direction solidification was infaust to obtain compact roll structures, that accelerated the roll to produce crack.
中间层凝固和轴向凝固的出现，不利于获得致密的轧辊组织，促进轧辊产生裂纹。
A through hole which is arranged on the rivet in a shaft direction can be used for threading a nail when the membrane sandwich riveted board for decoration is installed.
铆钉可将夹层板的层间夹固贴合，铆钉轴向所设通孔可供安装本装饰板时穿钉。
And in these bearings here are shaft encoders, and they sense that the rotation that the outer housing makes in order to keep this thing pointing at the same direction.
在这些轴承中，有轴角编码器，它们感受到了外面的框的转动，来保持这个东西，指向相同的方向。
This, the team suggests, implies that the direction of rotation is programmed into the stator ring, rather than the shaft, which thus dictates the direction of drive.
这一点，研究人员的看法，暗示旋转方向是规划到定子环，而不是轴，从而指引驱动器的方向。
There is angular between the longer axes of the ellipse and the axes of the shaft, moreover, the angular is variable with the magnitude and the direction of the load.
本文证明该椭圆长轴和传动轴应该呈一定的夹角，而且夹角值随工作载荷的大小和方向的变化而变化。
Specification: direction of rotation of output shaft varies with that of input shaft.
说明：当输入轴旋转方向改变，输出轴相应改变。
They limit the axial displacement of shaft or housing ir one direction.
它将轴或支架的轴向移动控制在一个方向。
Requirements on agitator drives; agitator speed and direction, bearing application running accuracy, dismounting space for shaft seal.
搅拌器传动装置的要求。旋转速度和旋转方向，轴承应用。
The impellers of each of the rows are mutually spaced in longitudinal direction of the respective shaft.
对每一行的叶轮相互间隔在各自轴纵向方向。
The needle roller clutch bearing is a kind of compound function bearing which transmits torque between the shaft and housing in one direction and allows free overrun in the opposite direction.
滚针离合器轴承是可单向传递轴和轴承座之间的扭矩，而反方向允许自由转动的一种复合功能轴承。
Subjecting the threaded nut to ultrasonic vibrations causes the threaded shaft to simultaneously rotate and translate in the axial direction.
将螺纹螺母进行超声振动导致螺纹轴沿着轴向方向同时旋转并移动。
Single row angular contact ball bearings in tandem arrangement must always be adjusted against another bearing inversely arranged for shaft guidance in the opposite direction.
单列角接触球轴承串联布置必须始终另一个轴承对轴的指导成反比安排在相反的方向调整。
The preferred direction would be shaft side high pressure as the pressure in the flow would assist the disc in sealing.
优先定向以具有较高压力的轴面作为流体压力，用于帮助阀板密封。
A front guide device is fixed on machine frame, and a back guide device can do parallel motion along the shaft line direction of the saw shaft.
圆锯片与锯轴通过花键连接，前导向装置固定在机架上，后导向装置可沿锯轴轴线方向平行移动。
The driving direction of the oil cylinder (5) is parallel to the connecting line of shaft centers of the air extruding roller (2) and the double-layer roll combining roller (1).
油缸（5）推 动的方向与挤气滚筒（2）和双层合卷滚筒（1）的轴心连线相平行。
The revolving direction, internal oil hole position and spline shaft of the domestic pump are modified to meet the installation requirement.
为了满足安装的要求，对国产齿轮泵的旋向、内油孔位置和花键轴等进行了改造。
By the solution selection for the run-through measurement of the inclined shaft anti-de-sac and error prediction obtaining that the important direction run-through error was 0.
通过选择斜井反掘贯通测量的方法，并进行误差预计，得出贯通重要方向误差为0。
The utility model relates to a two-way rotary electric toothbrush. The brush head of the utility model can rotate with a rotating shaft and the rotating direction can be changed.
一种能使刷头随转轴一起转动，并且还可以改变旋转方向的双向旋转式电动牙刷。
And the selected dynamic part takes the direct driving plan with hollow hydraulic motor and has the advantages of light, cheap and small volume in the direction of shaft.
动力头采用中空式液马达直接驱动方案，具有重量轻、成本低、轴间尺寸小等优点。
The rails pass up to the top of the shaft, where they are taken over a pulley which can be driven in either direction by an electric motor.
导轨直通到升降井顶部。钢丝绳在顶部绕过一个滑轮。滑轮由电动机驱动可向任一方向转动。
Main propertiesSeries of HGP roller screen is a kind of equipment which has materiel move forward by using of multi-shaft rotating with same speed and direction.
HGP系列滚轴筛是利用多轴同向等速旋转推移物料前移，并同时进行筛分作业的一种机械设备。
An adjusting groove, the direction of which is parallel to the axis of the rotating shaft, is disposed on the adjusting plate.
在所述调整盘上设置调整槽，所述调整槽的走向与所述转轴的轴线平行。
The utility model is characterized in that the top of the center shaft is provided with a plurality of thin wing pieces in the axes direction of the center shaft.
其特征是在固定中轴沿固定中轴的轴线在中轴的顶端制出若干个薄的翼片。
The guide (10, 10A) is capable of being moved in an axial direction and a radial direction of the spindle shaft (43, 53) by the guide moving mechanism (20, 20A).
引导件（10、10A）通过引导移动机构（20、20A）可沿轴（43、53）的轴向和径向移动。
The guide (10, 10A) is capable of being moved in an axial direction and a radial direction of the spindle shaft (43, 53) by the guide moving mechanism (20, 20A).
引导件（10、10A）通过引导移动机构（20、20A）可沿轴（43、53）的轴向和径向移动。
应用推荐