Plus the motor shaft axis, concentricity absolutely right and reliable.
泵轴为电机加长轴，同心度决对可靠。
However, the greater the displacement of the input shaft axis from the crown wheel axis, the lower the mechanical efficiency.
然而，更大的车轮从冠轴输入轴轴线位移，机械效率降低。
For example, using the gearbox fitted to the shell, the need for gearbox input shaft axis lines at the engine crank axis lines.
例如，将变速器装配到离合器壳上时，必须使变速器输入轴的中心线与发动机曲轴的中心线对准。
The pin fits snugly in a reamed tapered hole that is perpendicular to the shaft axis and either radial or tangential to the shaft surface.
该引脚正好符合了扩锥孔的垂直轴的轴线，要么径向或切向轴表面。
In 1873, the United States into a single spencer shaft automatic lathe, soon he and three axis made automatic lathe.
1873年，美国的斯潘塞制成一台单轴自动车床，不久他又制成三轴自动车床。
Its input axis and transmission gearbox's output shaft with the rotary transmission device connection.
其输入轴与变速器的输出轴用万向传动装置连接。
The axis of the tibial shaft is located anterolateral to the center of the tibial plateau in this population.
在这个人群当中，胫骨干纵轴相对于胫骨平台中心是位于前外侧的。
The shaft turns about its axis.
轴围绕自己的轴线转动。
This instrument is used for measuring roundness, axis straightness, coaxality and circular run out error of shaft parts.
该仪器可用于圆度、轴线直线度、同轴度和径向跳动误差等项目的测量。
Axis line deflection and asymmetric load distribution of the rotary kiln induce the cracking of supporting shaft frequently.
回转窑运行中由于轴线偏移，支承载荷分配不均导致托轮轴疲劳断裂。
Motor and pump connection in two ways, one motor and pump mounted on the bracket as a single entity, the second is the basis set by adding a separate motor axis connected with the shaft.
电机与泵的联接有两种方式，一是电机装在与泵体连为一体的支架上，二是电机单独设基础通过加长轴与泵轴联接。
The speed reducer upper on the main machine makes central axis rotate through shaft coupling and roller hanger rotates with central axis and rollers on the hanger roll around the inside of ring.
安装在主机顶部的减速机，通过联轴器连接中心轴旋转，中心轴带动磨辊吊架旋转，磨辊装在吊架上沿磨环内周一起滚动。
Power and non power shaft bend and adjust the pressure, and together with the roller disk axis deviation have been reflected in the design.
动力和非动力轴的弯度和调整压力，以及连同滚筒盘中的轴的偏差在设计中都得到体现。
Welding machine by high performance of pneumatic components, the dominant shaft and the direction for all use chrome axis light circle, transfer pressure flexible, no reliable absent produce.
焊机采用高性能气动元件，主导轴及导向轴均采用镀铬光圆，传递压力灵活可靠，无虚位产生。
The paper analyses the effect of translation and offset angle of the cone axis to shaft one on the gap variation between two ring-button, which position on two cones.
分析了牙轮钻头安装和磨损间隙引起牙轮相对牙爪轴线的平移和倾斜对相邻锥体上球齿间隙的影响，通过计算，当牙轮、牙爪轴线轴向、径向平移使球齿的趋近量有抵消的趋势；
Out in the shaft loaded oil ring groove or by centrifugal force along the axis of the oil drain off the surface, the oil flows back to the assembly after the pool, and thus play a role in sealing.
在轴上开出沟槽或装上油环，借离心力将沿轴表面外流的油甩掉，集结后流回油池，因而起到密封的作用。
The high speed drilling shaft and pin cylinder system work at the same reference axis to ensure high work precision and convent operation.
高速精密钻孔主轴和钉销气缸系同基准轴线上工作，能保证工作精度高，操作方便。
Rolling theoretical rotation axis line of the inner ring to the center axis line of bearings, thrust bearings on the shaft circle refers to the axis line.
滚动轴承的理论旋转轴心线，对向心轴承即内圈轴心线，对推力轴承则指轴圈轴心线。
A bolt hole is formed in the shaft body in such a manner as to substantially perpendicularly intersect the axis of the shaft body.
螺栓孔以与所述轴体的轴线基本上垂直相交的方式形成在所述轴体中。
The claimed bone screw (1) has a head (2), a shaft (3) and a longitudinal axis (9).
一种接骨螺钉(1)，具有一个头部(2)、一个杆部(3)和一个纵轴线(9)。
An adjusting groove, the direction of which is parallel to the axis of the rotating shaft, is disposed on the adjusting plate.
在所述调整盘上设置调整槽，所述调整槽的走向与所述转轴的轴线平行。
The shaft is structured to optionally move in the offset cam, and the display panel unit is structured to rotating around a spin axis when the shaft moves in the offset cam.
该轴构造成在偏心凸轮内选择性地移动，并且显示面板单元构造成当轴 在偏心凸轮内移动时绕旋转轴线旋转。
Moreover, the shaft is deviated from the spin axis.
此外，该轴偏离旋转轴线。
An axis external circle simulates a reference shaft line to realize the principle of the measurement of the plane to the symmetrical characteristic of the reference axis.
以轴外圆模拟基准轴线实现面对基准轴对称度测量的原理。
Mechanical seal leakage, the sleeve and the shaft leakage between (inter-axis leakage) is relatively common.
机械密封泄漏中，轴套与轴之间的泄漏是比较常见的。
The valve shaft adopts the half axis structure and the valve plate adopts the girder construction.
阀轴采用半轴结构，阀板采用桁架结构。
2 axis and shell inspection cleaning shaft and shell, no scars or no mechanical processing of the burr.
轴与外壳的检验清洗轴与外壳，确信无伤痕或无机械加工留下的毛刺。
Instructions: the product is divided into soft shaft pulp cavity hole opener to a pulp cavity axis and hole opener to;
产品说明：该产品分为软轴髓腔扩大器和硬轴髓腔扩大器；
Instructions: the product is divided into soft shaft pulp cavity hole opener to a pulp cavity axis and hole opener to;
产品说明：该产品分为软轴髓腔扩大器和硬轴髓腔扩大器；
应用推荐