Calibration methods are provided for determining servo parameters to enhance an optical drive in reading and writing a blank optical disc.
本发明提供多种调整方法来决定伺服参数，以改进光驱读取或写入空白光盘时的状况。
A new method for suppressing cutting chatter is studied by adjusting servo parameters of the numerical control (NC) machine tool and controlling the limited cutting width.
研究了通过调节数控机床伺服参数，控制极限切削宽度来抑制切削颤振的新方法。
The servo parameters of the urban traffic complexity system were found, the steps of researching the urban traffic system by the macroscopical method and the design concept of the urban t...
找出了城市交通复杂系统的序参量，最后提出了采用宏观方法研究城市交通系统的步骤及利用复杂性科学设计城市交通管理决策支持系统的思路。
Inherency frequency of servomechanism is to have an influence on the key parameters of servo accuracy and response capability, and demands the calculation of inherency frequency in the design stage.
伺服机构固有频率是影响伺服系统伺服精度、响应能力的重要参数，在设计阶段就需要对伺服机构的固有频率进行计算。
Physical parameters of single gimbal control moment gyroscopes(SGCMGs) are often assumed to be known exactly when steering law is designed by taking gimbal servo characteristics into account.
在单框架控制力矩陀螺（SGCMG）系统操纵律的设计中，如果考虑框架伺服特性，往往假设系统的物理参数是确切已知的。
Physical parameters of Single gimbal Control Moment Gyroscopes (SGCMGs) are often assumed to be known exactly when steering law is designed taking gimbal servo characteristics into account.
在单框架控制力矩陀螺(SGCMG)系统操纵律的设计中，如果考虑框架伺服特性，往往假设系统的物理参数是确切已知的。
The paper analyses the implemented algorithm of the predictive functional control in servo system with tache of restrictive saturated parameters.
分析了预测函数控制在具有参数饱和限制环节的伺服系统中的实施算法。
This driver can communicate externally with RS485 bus and accomplish speed servo and position servo with the scheduled parameters.
该驱动器通过RS485总线与外界通信，可按照预定参数完成速度和位置伺服。
It is shown that in spite of the system parameters changing in permissible ranges, the designed servo system is provided with satisfactory results.
结果表明，当系统参数在允许范围内变化时，所设计的伺服系统具有满意的性能指标。
The software and hardware of a digital AC servo system using a digital controller DMC300A as the control center is designed. This method to obtain some important parameters is proposed.
论述了以数字控制器DMC300A为核心的数字式交流伺服系统的硬件和软件设计，对设计过程中所涉及到的重要参数给出了设定方法。
This paper presents the principle of fix-gain filter to airborne radar servo system, the model of realizing, and the method of selecting parameters of the model.
介绍了应用在机载雷达伺服系统中的常增益滤波法的原理，以及实现模型和算法参数的选择方法。
Based on analyzing the dynamic characteristics of vertical servo motor of a NC vertical grinder, the effect of the parameters of speed loop on the servo system was studied.
分析了数控立式磨床垂直进给轴的机电动态特性，研究了伺服系统的速度环参数对伺服系统性能的影响。
Considering the nonlinear and the parameters variability, which vary widely with the working condition in the electro-hydraulic servo velocity system, fuzzy gain scheduling controller was developed.
针对电液伺服速度系统的非线性和参数时变特性，提出了模糊增益调度控制方法。
The result presents that the servo rigidity is more influenced by proportion plus of position loop than by other parameters.
实验结果表明，直线电动机的伺服刚度只受位置环比例增益的影响较大，而其它的控制参数对伺服刚度幅值影响不大。
The rules that the spindle servo system parameters would influence the workability of mixed air EDM (electrical discharge machining) technology are introduced. Experimental results are analyzed.
介绍了主轴伺服系统参数对混气电火花加工性能的影响规律，并对所产生的加工现象进行了分析。
Servo control program is written and PID controller is designed, the parameters are adjusted on-line.
编写伺服控制程序并设计PID控制器，在线调整控制参数。
The dynamic performance of AC servo systems is improved by identifying the mechanical parameters to auto -tune the speed controller.
为对交流伺服系统的转动惯量进行在线辨识，调整了调节器参数以改善系统的动态性能。
The hookup of PLC to inverter, PLC to servo driver was designed, also the parameters setting of the inverter and the servo driver were illustrated in details.
设计了PLC与变频器、PLC与伺服驱动器的控制线路图，并对变频器和伺服驱动器的参数设定进行详细说明。
By the parameters, the pulses and the direction signals of the control card, the servo motor is drived.
设置运动控制卡中的参数，通过控制卡发出的脉冲与方向信号来驱动伺服电机。
The selection of the electrohydraulic servo valve and the parameters of the rectifier are discussed.
同时讨论电液伺服阀的选取和校正方程的参数确定原则。
In the servo system, variation of the system parameters and external disturbances always happen. The conventional PID controller tends to make the system have a large overshoot even unstable.
在伺服系统中，由于系统参数变化和外部干扰的存在，应用常规pid控制方法往往使系统产生较大的超调量甚至不稳定。
Finally, through on-line debugging, the author realized the PMSM servo driver with functions of variable frequency speed regulation, parameter identification and parameters displaying.
最后，作者通过在线软、硬件调试，实现了具有变频调速、参数识别和参数显示等功能的永磁同步电机伺服驱动器的研制。
This software can control servo tracking system basing on satellite orbit parameters and realize the real-time tracking of satellite.
本软件依据卫星轨道参数控制伺服跟踪系统，完成对卫星的实时跟踪。
At the same time, a robust adaptive controller is designed to make the servo system be robust to the parameter variation since the parameters of the servo system are time-varying.
同时针对控制系统的参数时常变化的特点，设计了鲁棒自适应控制器提高伺服系统对参数变化的鲁棒性。
This paper builds the model of single axis servo system, and analyzes the different influence of each subsystem's parameters to the system performance.
本文首先建立了伺服系统的数学模型，分析了子系统参数对总体性能的影响。
Therefore, it is urgent and significant to study the self-tuning strategy of AC servo system control parameters to improve the efficiency and performance of servo systems.
进行交流伺服系统控制参数自整定策略研究，是提高伺服系统运行效率和性能的迫切需要，具有重要意义。
In order to improve the stability of servo motor system, the control parameters adjusting system for servo motor was designed.
为了提高伺服电动机系统的运行性能，设计了伺服电动机系统参数整定平台。
Velocity loop servo system with fuzzy PID controller, correcting PID parameters instantaneously using fuzzy control, improved response speed, control accuracy and robustness of the system.
对伺服系统速度环采用模糊PID控制器，利用模糊控制实时修正PID参数，提高了系统的响应速度、控制精度以及鲁棒性；
Velocity loop servo system with fuzzy PID controller, correcting PID parameters instantaneously using fuzzy control, improved response speed, control accuracy and robustness of the system.
对伺服系统速度环采用模糊PID控制器，利用模糊控制实时修正PID参数，提高了系统的响应速度、控制精度以及鲁棒性；
应用推荐