Double shaft servo feed system by PLC to control accurately and automatically feed of cylinder head and valve lift.
PLC控制双轴伺服进给系统,精确自动控制缸盖进给和气门升程。
Determining composing factors of comprehensive pull-pressing rigidity of servo feed system provide a theory basis for design work.
确定伺服进给系统综合拉压刚度的构成因素对设计工作提供了理论依据。
The capabilities of the torque, moment of inertia and acceleration of the servo motor is mostly checked. The rigidity and accuracy of servo feed system is verified.
并着重对电动机的转矩、转动惯量及加速能力进行了匹配校核,对机械传动装置刚度变化及弹性系统刚度变化引起的定位误差进行了验算。
Servo feed system affects not only the stability of machine tool, but also the response of machine tool. Efficient and stable servo feed system can improve machine process ability.
伺服进给系统不仅对机床的稳定性有影响,对响应性方面的影响也非常重要,高效、稳定的伺服进给系统能够很好的提高机床的加工性能。
Servo feed system comprehensive pull-pressing rigidity is made up of the rigidity of servo drive system and the rigidity of mechanical transmission system, and each is affected by multiple factors.
伺服进给系统的综合拉压刚度由伺服驱动系统刚度和机械传动系统刚度组成,其各自又受多项因素的影响。
Newly designed power supply system. While in machining big surface and deep hole, the computer provides two steps servo feed for superior machining quality and discharge accuracy.
全新电源系统,针对大面积及深孔加工,电脑可选定二段伺服进给速度,加工性能优异并可保持放电精密度。
The stepping motor is extensively used as the executive mechanism in the feed servo system of economical type NC lathe.
在经济型数控车床的进给伺服系统中,广泛地采用步进电机做为执行机构。
The comparison of experiments shows that the feed servo system can greatly improve control accuracy and reduce the following error.
通过实验数据的比较,显著提高了进给伺服系统的控制精度,减少了跟踪误差。
In this paper, the research object is the position controller of a permanent magnet linear motor direct drive feed servo system.
本论文以超精密机床用永磁同步直线电机驱动进给伺服系统位置控制器为研究对象。
In this system, linear motor is applied, and under the control of computer, fast response of servo drive for tool feed, high positioning accuracy and high precision workpiece are achieved.
该系统用直线电机,在计算机的控制下,刀具进给伺服机构响应速度快,定位精度高,能高速、高精度地加工工件。
Hence, the causes of its components' failures, including mechanical part, electric part and feed servo system, were analyzed and some solutions related put forward to deal with them.
对数控机床的机械部分、电气部分、进给伺服系统三个方面产生故障的原因、特点进行了分析和介绍,为采取相应的处理方法提供参考。
NC feed servo system was designed by applying SISO designer in MATLAB control system toolbox.
利用MATLAB控制系统工具箱中的SISO设计器设计了数控进给伺服系统。
This paper introduces the development of the servo control electronic yarn feed system and analyzes the warp knitting machine's let-off feedback deflection and the.
论文详细介绍了伺服控制的经编电子送经系统的开发过程及送经反馈偏差和停车横条与电子送经系统的关系。
Machine tool feed system is usually driven by ac servo motor ball screw feed drive to achieve, to simplify the structure.
机床的进给系统通常是通过交流伺服电机驱动的驱动滚珠丝杠饲料,简化结构,实现。
And adopting the method in which including periodical detecting and local detecting of gap discharge state, the servo feed control-system based on fuzzy control technology was designed.
在此基础上,采用控制周期总体间隙状况和局部短路的伺服控制策略,建立了基于模糊控制技术的回转式电火花展成加工伺服进给控制系统。
This paper analyzed AC servo heavy cutting feed system component parts and their actions, and built model about mechanical transmission equipment section.
分析了强力切削交流伺服进给系统各组成环节及作用,对机械传动装置部分建立了模型。
The servo loops include speed control loop and position control loop plus feed-forward control, therefore the system is a compound control system.
该伺服系统包括速度环和位置环以及前馈控制,因此该系统是一个复合控制系统。
The feed drive system of a precision cold ring rolling mill adopts AC servo motor and mechanical transmission, rather than conventional electro-hydraulic actuator.
采用交流伺服电机和机械驱动进给系统的冷轧环机,其进给伺服控制系统的设计需要一个新的工艺动力学模型。
The practice result shows that this servo-feed system can realize servo moving accurately, and can meet the system position accuracy, response speed and stability required by the machining process.
经实际生产验证,该伺服进给系统能准确地实现伺服运动,满足加工过程要求的系统定位精度、响应速度及稳定性。
The servo motor and ball screw are used in feed system.
主要是针对普通机床的进给系统进行数控化改造。
Secondly, the control of position loop was improved by using compound control with velocity and acceleration feed-forward control and digital notch filter control in feeding servo system.
其次对位置环的控制进行了改进,将位置前馈改进为速度前馈和加速度前馈,并在前向通路中增加了一个数字阶式滤波器组成复合运动控制器。
According to the performance requirement of the ultra-precision machine feed drive servo system and the characteristic of "direct drive", the control structure is designed.
并根据高速机床进给系统伺服性能的要求和直接驱动的特点,搭建直线电机控制系统平台。
A new slide mode controller is designed for AC servo system. The feed forward signal is used as average control, and fuzzy inference is used to regulate the magnitude of on-off control.
针对交流伺服系统的位置控制,设计出一种新型滑模控制器,以前馈信号作为平均控制,采用模糊推理来调节开关控制的幅度。
The result validates that this position control system using as the precision machine feed drive servo servo system is feasible.
实验结果初步验证了该位置伺服控制系统在精密加工机床上应用的可行性。
Servo drive for film feed system allows for accurate positioning and easy adjustment.
送膜机构采用伺服电机,定位精度高,易于调整。
Servo drive for film feed system allows for accurate positioning and easy adjustment.
送膜机构采用伺服电机,定位精度高,易于调整。
应用推荐