You can shift the position of the servo motors via two correction inputs, ie. to build up a control loop. This compensates all interference which influences the firing process.
您可以通过修正两个输入参数改变伺服电机的位置来建立新的循环控制。本功能将对影响燃烧过程的所有因素进行补偿。
Adopting ac servo motor as the driving device, can the dc servo motor and a high precision, high performance as the half closed loop or closed loop control system.
采用交流伺服电机作为驱动器件，可以和直流伺服电机一样构成高精度，高性能的半闭环或闭环控制系统。
A kind of the pulse control mode, the drive and motor closed loop, but not to the numerical control system, the feedback device, in a sense, can open loop control called the servo control.
一种采用脉冲控制方式，此种驱动器与电机闭环，但不反馈到数控系统，这种驱动器在某种程度上可称为开环控制的伺服控制。
In dealing with the relationship of the servo valve position control and the adaptive control, the Double-loop control is adopted.
提出了伺服阀的位置控制和颤振的控制关系上采用可切换的双通道控制形式的设计思想。
Adopting ac servo motor as a drive device, can and dc servo motor as a high precision, high performance and a half closed loop or closed loop control system.
采用交流伺服电机作为驱动器件，可以和直流伺服电机一样构成高精度，高性能的半闭环或闭环控制系统。
A new equipment for simulated the performance of propeller load is introduced in this paper, it's an all digital DC torque servo system using torque closed loop and current closed loop control.
介绍一种新型的螺旋桨特性负载模拟装置，它是全数字控制的直流转矩伺服系统，采用转矩电流双闭环控制方式。
Microprocessor, dedicated motion controller and driver, optical electronic encoder were used to realize servo closed-loop motion control.
采用微处理器、专用的运动控制和驱动芯片以及光电编码器实现了机器人关节的伺服闭环运动控制；
The platform with digital cylinder avoids lots of hydraulic servo parameter adjusting devices and A/D, D/A data conversion devices. Therefore it can be regarded as an open loop control for developers.
该平台采用新型数字液压缸，其控制不需外部A/D、D/A转换，同时减少了大量的液压伺服参数调节装置，对控制者来说完全是一种开环控制。
DELTA AC servo motors and controllers to determine the precise length cut, closed loop control.
采用台达交流伺服电机及控制器实现精确定长剪切，全闭环控制。
Based on the continuous casting device in the laboratory of our school, the theory of robust control is applied to position loop system driven by hydraulic servo.
本课题针对我校实验室结晶器连铸装置，将鲁棒控制理论应用于液压驱动伺服位置环系统的研究开发。
For digitized AC servo system, it needs software to support it's closed-loop control. Its control quality is decided by the program of control computation directly.
数字化的交流伺服系统是靠软件完成控制计算来支持闭环控制的，它的控制计算程序直接决定了系统的控制质量。
Experiments show that the two-loop Servo System has good performances in speed and position control.
实验表明：双闭环的永磁数字交流伺服系统拥有很高的速度和位置控制性能。
A kind of the use of impulsive control mode, the drive and motor closed loop, but not feedback to the numerical control system, this drive, in a sense, can open loop control called the servo control.
一种采用脉冲控制方式，此种驱动器与电机闭环，但不反馈到数控系统，这种驱动器在某种程度上可称为开环控制的伺服控制。
The position control loop composed of self-adjusting PI control based on Fuzzy inferences in AC servo system of permanent magnet synchronous motor was discussed emphaticaly in this paper.
主要分析了用模糊自适应PI控制构成永磁同步电机交流伺服系统的位置环。
Practical simulating models are deduced and built for the gyro system and the performing setting of the servo system to consist a close-control loop with angle-tracing circuit.
推导并建立了陀螺系统和伺服执行机构的实物仿真模型，使之与角跟踪电路构成闭合控制回路。
The servo control system combines position loop, speed loop, current loop with algorithm of space vector pulse width modulation(SVPWM).
系统采用位置、速度和电流环三环控制，并结合空间矢量脉宽调制（SVPWM）算法。
Velocity loop servo system with fuzzy PID controller, correcting PID parameters instantaneously using fuzzy control, improved response speed, control accuracy and robustness of the system.
对伺服系统速度环采用模糊PID控制器，利用模糊控制实时修正PID参数，提高了系统的响应速度、控制精度以及鲁棒性；
Position loop servo system with sliding mode controller, improved accuracy of position tracking servo system, to further improved the system of permanent magnet servo control performance.
对伺服系统的位置环采用滑模变结构控制器，提高了伺服系统位置跟踪精度，进一步改进了永磁伺服系统的控制性能。
Position closed-loop control was used to control the position of servo hydraulic cylinder to improve control accuracy.
在位置闭环控制中比例伺服阀控制伺服缸，解决了控制精度低的问题。
The servo loops include speed control loop and position control loop plus feed-forward control, therefore the system is a compound control system.
该伺服系统包括速度环和位置环以及前馈控制，因此该系统是一个复合控制系统。
The system proposes the application of a closed loop position servo control and sets up a model and algorithm of er ror tracing and digital feedback.
系统提出采用闭环位置伺服控制，建立跟随误差和数字反馈的模型和算法。
Introduced are basic principle and characters of servo rebalance control loop in a dynamically tuned gyro inclinometer system.
介绍了动调式陀螺测斜系统伺服控制再平衡回路的基本原理和工作特点。
Secondly, servo control tache is introduced briefly, and how to realize a closed-loop position control system which USES stepping motor as driver component is presented.
其次，对于伺服控制环节，实现了以步进电机为驱动元件的闭环位置控制系统。
A dynamic simulation tool, SIMULINK software package in MATLAB, is taken as the development tool, and applied in the dynamic response computation of the hydraulic servo closed-loop control system.
以MATLAB中动态仿真工具SIMULINK软件包为开发工具，将其应用于该液压伺服闭环控制系统的动态响应计算中，针对上述两种闭环控制系统，给出了考虑干扰量情况下的SIMULINK仿真方法。
Secondly, the control of position loop was improved by using compound control with velocity and acceleration feed-forward control and digital notch filter control in feeding servo system.
其次对位置环的控制进行了改进，将位置前馈改进为速度前馈和加速度前馈，并在前向通路中增加了一个数字阶式滤波器组成复合运动控制器。
The microprocessor, dedicated motion controlling and driving chip, optical encoder are adopted to realize the joints 'closed-loop servo motion control.
它采用了微处理器、专用的运动控制和驱动芯片以及光电编码器，实现了机器人关节的伺服闭环运动控制。
In this control loop, on account of giving consideration to both the rapidity and precision of position servo-control, we designed a fuzzy controller.
为了兼顾位置伺服控制的快速性和精确性，在本环节设计了一个模糊控制器。
The stability of servo, move forward and close-loop fuzzy control system for electric spark processing was analysed theoretically with the concept of equ...
并应用平衡态的概念和稳定性定理，从理论上阐述和分析了电火花加工伺服进给闭环模糊控制系统的稳定性。
DELTA AC servo motor and controller for precision to determine the long cut, full closed-loop control.
采用台达交流伺服电机及控制器实现精确定长剪切，全闭环控制。
DELTA AC servo motor and controller for precision to determine the long cut, full closed-loop control.
采用台达交流伺服电机及控制器实现精确定长剪切，全闭环控制。
应用推荐