Along with the gradual improvement of the servo control technology, the servo drive unit is gradually becoming the main force of the drive unit, servo drive unit price also gradually to reduce.
随着伺服控制技术的逐步提高，目前伺服驱动单元正逐步成为驱动单元的主力军，伺服驱动单元的价格也在逐步减低。
A kind of the pulse control mode, the drive and motor closed loop, but not to the numerical control system, the feedback device, in a sense, can open loop control called the servo control.
一种采用脉冲控制方式，此种驱动器与电机闭环，但不反馈到数控系统，这种驱动器在某种程度上可称为开环控制的伺服控制。
The lower DSP (TMS F2812) is used to realize the interpolation and control of three axes for the retrofitted CNC milling machine equipped with SIEMENS servo drive amplifiers and ac servo motors.
下位TMSF2812型DSP芯片则主要用于实现复杂的插补及控制算法，并以西门子伺服驱动放大器和交流伺服电机作为驱动单元，对改造后的数控铣床各轴进行位置控制。
An airborne radar servo system is introduced in the paper, and the principle, structure, control scheme, drive technology of the system are analyzed.
介绍了某机载雷达伺服系统，对其工作原理、基本结构、控制方案、驱动技术等进行了分析探讨。
Adopting ac servo motor as a drive device, can and dc servo motor as a high precision, high performance and a half closed loop or closed loop control system.
采用交流伺服电机作为驱动器件，可以和直流伺服电机一样构成高精度，高性能的半闭环或闭环控制系统。
This article introduced emphatically the control strategy, position detection and identification, drive technique as well as main circuit of permanent magnet Ac servo system.
重点介绍了永磁交流伺服系统的控制策略，位置检测和辨识、主电路和驱动技术等关键技术。
The modern control technology for motor is not only the core of servo drive systems, but is one of the most typical symbols of modern manufacturing equipments.
电机现代控制技术是伺服驱动系统的核心，也是现代制造装备最具代表性的先进标志之一。
All the concerned control strategies are supported with the simulation results that are made on the experimental frequency domain model of the AC200 servo drive system.
所研究的控制方法均在AC200交流伺服驱动系统的频率域实验模型上做了仿真实验，结果支持了本文分析所得的结论。
The hardware and software design of three_dimensional control system in the laser inner carver is introduced, also transmission mechanism ac servo drive has been given account.
介绍了激光内雕机中三维控制系统硬件和软件的设计，并对传动机构交流伺服驱动进行了论述。
The motor servo drive system was used to control antenna turning, adjust the antenna to point at satellite again and receive signal.
再用电机伺服驱动系统控制天线转动，调整其重新指向卫星接收信号。
Man-machine inter-facial can program logic control, pneumatic, servo motor drive, advanced sterilizing and asepsis keeping.
人机界面，可编程控制、气动、伺服电机驱动，先进的杀菌与无菌保障。
Along with the gradual improvement of the servo control technology, the servo drive unit is gradually becoming the main drive unit, servo drive unit price also gradually to reduce.
随着伺服控制技术的逐步提高，目前伺服驱动单元正逐步成为驱动单元的主力军，伺服驱动单元的价格也在逐步减低。
A global sliding model variable structure control scheme based on artificial neuron compensation for a direct drive AC permanent magnet linear servo system are presented in this paper.
针对直接驱动的交流永磁直线伺服系统，提出一种基于神经元补偿控制的全程滑模变结构控制策略。
To meet the demand of servo drive system, the vector control technique is chosen as the control strategy of permanent magnet synchronous servo system.
结合伺服传动控制系统的要求，确定永磁同步电机伺服系统的控制方案为矢量控制。
These motors are designed to accommodate a wide range of applications including direct drive servo systems, recorder drives, holding torque and high torque-low speed control systems.
这些电机的设计，以适应范围广泛的应用，包括直接驱动伺服系统中，记录器的驱动器，保持转矩和高转矩低速控制系统。
The new scheme is implemented for position control of an industrial servo motor with typical drive and feedback sensing capabilities.
此法已用于一带有典型驱动和反馈传感器的工业直流电机的位置控制之中。
In this system, linear motor is applied, and under the control of computer, fast response of servo drive for tool feed, high positioning accuracy and high precision workpiece are achieved.
该系统用直线电机，在计算机的控制下，刀具进给伺服机构响应速度快，定位精度高，能高速、高精度地加工工件。
The hybrid AC servo Press H1F realized high performance in the combination of advanced CNC control and hybrid drive mechanism (pat. p).
复合ac伺服压力机h 1f是利用CNC控制与复合驱动机构(申请专利中)的组合，实现了其超过性能。
The experimental results show that this method greatly improves the control performance of the BLDCM, making it have extensive application prospects in high performance servo and drive areas.
实验结果表明本文的工作提升了无刷直流电机的控制性能，使其在高性能的伺服驱动领域具有更广阔的应用前景。
Servo-drive of virtual-axis machine is always a problem in control theory and application technology because it has strong coupling.
虚拟轴数控机床的各伺服驱动回路由于轴间强耦合的影响，在国内外，一直是控制理论和实现技术方面的一个难题。
The mature industrial motion control system is used to integrate the high precision servo drive mechanism, the ball screw slide block and other CNC processing and synthesis module.
采用成熟的工业运动控制系统，集成高精度伺服驱动机构，滚珠丝杠滑块等CNC加工合成模组。
This paper presents a sliding mode variable structure control (SMVSC) method based on fuzzy self-learning for a direct-drive AC Lin ear servo system.
针对直接驱动直线式交流伺服系统，提出了一种基于模糊自学习的滑模变结构控制方案。
A kind of the use of impulsive control mode, the drive and motor closed loop, but not feedback to the numerical control system, this drive, in a sense, can open loop control called the servo control.
一种采用脉冲控制方式，此种驱动器与电机闭环，但不反馈到数控系统，这种驱动器在某种程度上可称为开环控制的伺服控制。
Backstepping control called a novel nonlinear strategy is one of the high focus research in ac servo drive for simple arithmetic and facility project implementation.
反推控制是一种新颖的非线性控制策略，算法简单，易于工程实现，是目前交流伺服控制研究热点之一。
The advanced servo control system used by now was usually consisted by special motion control unit, special high speed communication bus, and special servo drive system.
目前生产中用到的较先进的伺服控制系统通常采用专用的运动控制模块，加上专用的高速通讯总线，再加上专用的伺服驱动系统组成。
In this paper, it detailedly describes the hardware design methods of the PCC system and the servo drive system, and introduces the control function of system.
本文详细的叙述了PCC系统和伺服驱动系统的硬件设计方法，并对系统的控制功能进行了说明。
An airborne camera servo system is introduced, and the principle, structure, control scheme, drive technology of the system are analyzed.
介绍了某机载相机伺服系统，对其工作原理、基本结构、控制方案、校正设计等进行了分析探讨。
The main control structure of the servo drive is formed by two cascade loops, which are the current inner loop and the velocity outer loop.
驱动器控制架构采用电流与速 度迴路串级的双迴路控制架构，其中可调参数为电流与速度控制器参数。
But at the same time it adds the difficulties in the aspect of the electrical control, because linear servo system run-time needs of direct drive method.
但同时直线伺服系统运行时直接驱动负载，从而增加了进给伺服系统的控制难度。
But at the same time it adds the difficulties in the aspect of the electrical control, because linear servo system run-time needs of direct drive method.
但同时直线伺服系统运行时直接驱动负载，从而增加了进给伺服系统的控制难度。
应用推荐