No suitable mathematical model for the telemetry servo-tracking system without distance signals is discussed in unclassified articles.
由于遥测伺服跟踪系统无距离信号,目前国内外公开资料中还无一数学模型适用于此类系统。
This paper presents the design method of servo system controller applying in image identifying and tracking system.
介绍了应用于图像识别与跟踪系统中的伺服系统控制器的设计方法。
However, the reflector antenna has a big size and needs a complicated servo Tracking system, so it is not suited for installation platform of vehicle and airborne.
但是反射面天线尺寸大,并且需要复杂的伺服跟踪系统,因此不适合车载、机载等安装平台。
Servo system of the compact disc storage device is the combination of fine machine and computer control, gathering high tech such as laser measure or tracking position and DSP application.
光盘存储设备的伺服系统是精密机械和计算机控制的结合,集合了激光测量及定位跟踪、DSP应用等高新技术。
The obtained results have shown that the controller meets the requirements for the robust servo tracking performance.
结果表明,该控制器能够满足鲁棒伺服跟踪控制的要求。
It avoids identifying parmeter on line and can give a rather accurate servo tracking result and is fairly robust to system parameter variation and load disturbance.
该系统具有较高的伺服跟踪精度和较强的鲁棒性,无需在线辨识。
The system servo of fine tracking plays a key role in space laser communication.
精跟踪伺服系统是自由空间激光通信中的一项关键技术。
The high ability of optoelectronic tracking servo system to tracking and acquiring fast moving targets is required , along with the rapid enhancement of target speed and acceleration .
随着被测目标速度和加速度的提高,对光电跟踪伺服系统的快速捕获能力也提出了越来越高的要求。
To improve the trace precision of the servo system in some tracking set, the text adopts the computer aided control techniques based on digital forecast and filter.
本文以提高某跟踪装置的伺服系统的跟踪精度为主要目标,采取了基于数字预测和滤波的计算机辅助控制技术。
The velocity delay compensation is a effective method to improve the tracking precisions of the photoelectric servo systems.
速度滞后补偿是一种提高光电伺服系统跟踪精度的有效方法。
Pressure tracking of a pneumatic servo system plays an important part in the active pneumatic isolation technique.
气动伺服系统的压力跟踪是主动隔振系统中的一个重要环节。
With the increase of both object speed and automatic tracking ability of the optoelectronic tracking equipment, higher precision is needed for the servo system in the TV tracker.
随着目标速度的提高和光电跟踪设备自动化程度的提高,对电视跟踪器伺服系统的跟踪精度提出了越来越高的要求。
An improved repetitive control algorithm was developed to improve tracking accuracy for a linear servo unit in a numerical piston lathe.
为了提高非圆数控车削系统中直线伺服单元的跟踪精度,该文提出了一种改进的离散重复控制算法。
The result of test shows that under different tracking speed, the servo control system using this algorithm all features high control accuracy and excellent dynamic performance.
试验结果表明,基于该算法的伺服控制系统在不同跟踪速度下均具有较高的控制精度和良好的动态性能。
These analytical methods may be used to design and make the optoelectronic tracker servo systems with quick response and high tracking accuracy.
该分析方法可应用于设计和制造响应速度快、跟踪精度高的光电跟踪伺服系统。
Gimbal servo systems of single gimbal control moment gyroscopes (SGCMGs) are often assumed to have ideal tracking performance during the steering law design.
在单框架控制力矩陀螺(SGCMG)系统操纵律的设计中,通常假定框架伺服系统具有理想的伺服跟踪性能。
The position tracking controller with good performance is the guarantee of high precision brushless DC motor servo system.
为了设计高精度的直流无刷电机伺服控制系统,性能优良的位置跟踪控制器是其重要保障。
The simulation results show that the tracking error of middle-convex and varying ellipse piston linear servo drive system can be reduced effectively by this method.
仿真结果表明,采用这种控制策略可以十分有效地减小中凸变椭圆活塞直线伺服驱动系统的跟踪误差。
Seeker servo control system is a key component of the seeker and its performance directly determine the seeker's tracking accuracy.
导引头伺服控制系统是导引头的关键组成部分,其性能直接决定导引头的跟踪精度。
Theory analysis and the result of simulations show that the scheme possess simultaneously both good behavior of servo tracking and stochastic regulation in adaptive control system of our design.
理论分析和仿真结果表明所设计的自适应控制系统具有良好的伺服跟踪性能和随机调节性能。
Position loop servo system with sliding mode controller, improved accuracy of position tracking servo system, to further improved the system of permanent magnet servo control performance.
对伺服系统的位置环采用滑模变结构控制器,提高了伺服系统位置跟踪精度,进一步改进了永磁伺服系统的控制性能。
So improving the tracking ability of a theodolite for the fast moving target is the orientation of the photoelectrical tracking and servo system all along.
因此提高光电经纬仪跟踪快速运动目标的能力,一直是光电跟踪伺服系统努力的方向。
Servo control in optoelectronic tracking system is one of the key technologies to realize the high precision tracking.
光电跟踪系统中的伺服控制技术是实现高精度跟踪的关键技术之一。
XXX Antenna tracking system is a low speed, high tracking precision servo system, whose key is how to realize high precision motive tracking.
XXX天线程序跟踪伺服系统是低速、高精度的运动控制系统,系统的重点在于如何实现较高的动态跟踪精度。
The simulation result on the servo system indicates that the control method above improves effectively dynamic tracking performance of the servo system and has good robustness.
仿真结果表明,有效提高了转台伺服系统的动态跟踪精度,并具有较好的鲁棒性能。
Combined with "4ktd-170 Four-Axes Servo Turntable System" project, the thesis finishes the development of Image tracking System and the research of tracking algorithms.
本文结合“4ktd- 170型四轴伺服转台系统”项目,完成了图像跟踪系统的研制并对跟踪算法进行了研究。
The experimental results show that the proposed predictive control is an effective one for the pressure tracking of the pneumatic servo system.
实验表明,本文提出的方法有效地解决了主动隔振系统中的气动压力跟踪问题。
This paper presents a real-time tracking system which tracks moving object and makes the target always lie in the center of image frame assisted by controlling a servo device.
该文给出了一种运动目标的跟踪算法,它与云台设备控制相结合,可使被跟踪目标始终位于图像的中心区域。
The input transform and state feedback are used for multivariable control system, and the integral servo tracking controller is designed for the decoupled systeins.
为解决双转子涡喷发动机多变量系统的控制问题,采用了输入变换和状态反馈的方法,并对解耦后的系统设计了伺服跟踪控制器。
The input transform and state feedback are used for multivariable control system, and the integral servo tracking controller is designed for the decoupled systeins.
为解决双转子涡喷发动机多变量系统的控制问题,采用了输入变换和状态反馈的方法,并对解耦后的系统设计了伺服跟踪控制器。
应用推荐