• Servo-drive of virtual-axis machine is always a problem in control theory and application technology because it has strong coupling.

    虚拟轴数控机床的各伺服驱动回路由于轴间强耦合的影响,在国内外,一直是控制理论和实现技术方面的一个难题。

    youdao

  • Servo-drive instrument was designed and manufactured. It is feasible to simulate the movement of the hinge of movable components such as body flap, rudder, etc.

    设计并制造伺服传动装置,实现了方向舵、襟翼等活动控制构件铰链的机械转动模拟。

    youdao

  • Abstract: : Servo drive products have been used abroad in the machine and CNC industry.

    摘要:伺服驱动产品已经被广泛应用在机床行业,数控加工行业。

    youdao

  • The paper introduces servo drive technology applied in Horizontal Continuous Casting System.

    本文介绍了伺服驱动技术在水平连铸中的应用。

    youdao

  • The whole sets nc machine tools of lower prices generally choose the stepping driving unit and the price higher machine tool selection servo drive unit.

    整台数控机床价格较低的一般选择步进驱动单元,而价格较高的机床选择伺服驱动单元。

    youdao

  • The motor servo drive system was used to control antenna turning, adjust the antenna to point at satellite again and receive signal.

    再用电机伺服驱动系统控制天线转动,调整其重新指向卫星接收信号。

    youdao

  • The modern control technology for motor is not only the core of servo drive systems, but is one of the most typical symbols of modern manufacturing equipments.

    电机现代控制技术是伺服驱动系统的核心,也是现代制造装备最具代表性的先进标志之一。

    youdao

  • All the concerned control strategies are supported with the simulation results that are made on the experimental frequency domain model of the AC200 servo drive system.

    所研究的控制方法均在AC200交流伺服驱动系统的频率域实验模型上做了仿真实验,结果支持了本文分析所得的结论。

    youdao

  • As a direct servo drive, it offers high resolution.

    作为直接伺服驱动器,它提供了高解析度。

    youdao

  • A servo drive pulls the two flanks alternately in longitudinal direction, thus moving the wing up and down.

    一个伺服驱动两片侧翼交替地纵向移动,驱使羽翼上下运动。

    youdao

  • A servo drive unit of hinge pull roll relates to machinery for printing industry.

    折页牵引辊伺服驱动装置,涉及印刷机械。

    youdao

  • The mature industrial motion control system is used to integrate the high precision servo drive mechanism, the ball screw slide block and other CNC processing and synthesis module.

    采用成熟的工业运动控制系统,集成高精度伺服驱动机构,滚珠丝杠滑块等CNC加工合成模组。

    youdao

  • Based on direct drive servo motor CNC bending machine technology is an emerging technology.

    基于伺服电机直接驱动的折弯机数控技术则是一门新兴的技术。

    youdao

  • Track density can be greatly enhanced by employing optical servo technology in a disk drive.

    在磁盘驱动器中借助光伺服技术可以大幅度提高道密度。

    youdao

  • Introduce the composition, the hardware and software for two AC servo motors which drive loads simultaneously under rigid connection. Also Present the experimental results.

    介绍在刚性连接方式下,用两台交流伺服电机同时驱动同一负载方案的组成、硬件和软件,给出了该系统的实验结果。

    youdao

  • The missile rudder servo controller adopts TMS320F2812 as main CPU, IR2110 as drive chip. Each part of main circuit is analyzed in detail.

    以TMS320F2812作为主控CPU,以IR2110作为驱动芯片,完成了导弹舵机伺服控制系统的硬件设计,进行了控制器主电路的分析与设计。

    youdao

  • In this paper, the research object is the position controller of a permanent magnet linear motor direct drive feed servo system.

    本论文以超精密机床用永磁同步直线电机驱动进给伺服系统位置控制器为研究对象。

    youdao

  • The original machine head was replaced with servo motor to drive the cloth frame.

    用伺服电机取代原机械头驱动飞梭机布框。

    youdao

  • Non uniform motion can be produced by using a servo motor to drive a middle transmission system.

    非均匀运动可以由伺服电机带动中间传输机构来完成。

    youdao

  • When used in correction mechanism of mechanical drive, hydraulic servo system manifests a long time of overshoot, large overshoot and poor correction accuracy.

    当液压伺服系统用于机械传动的校正机构时,显得调整时间长,超调量大,校正精度不高。

    youdao

  • The results of simulation showed that it was feasible to use electric servo system as the drive system of the stabilizer fin, and the controllers of this paper had favorable capability.

    仿真结果表明:采用电伺服系统作为减摇鳍转鳍驱动系统是可行的,本文所设计控制器满足减摇鳍系统的性能指标要求。

    youdao

  • The DC servo motors are controlled with motion controller LM629 and motor drive chip LMD18200 based on PC104 bus.

    在PC 104总线控制下,应用运动控制芯片LM 629和电动机驱动芯片LMD18200实现了直流伺服电动机的控制。

    youdao

  • Feed transmission: using AC servo motor to drive the precise ball screw sets that supported by special ball screw bearing, which improves the rigidity and precision of feed movement.

    进给传动:三向进给均采用交流伺服电机驱动精密滚珠丝杆,专用丝杆轴承支承,提高了机床的进给运动刚性和精度。

    youdao

  • The experimental results show that this method greatly improves the control performance of the BLDCM, making it have extensive application prospects in high performance servo and drive areas.

    实验结果表明本文的工作提升了无刷直流电机的控制性能,使其在高性能的伺服驱动领域具有更广阔的应用前景。

    youdao

  • An airborne radar servo system is introduced in the paper, and the principle, structure, control scheme, drive technology of the system are analyzed.

    介绍了某机载雷达伺服系统,对其工作原理、基本结构、控制方案、驱动技术等进行了分析探讨。

    youdao

  • This article introduced emphatically the control strategy, position detection and identification, drive technique as well as main circuit of permanent magnet Ac servo system.

    重点介绍了永磁交流伺服系统的控制策略,位置检测和辨识、主电路和驱动技术等关键技术。

    youdao

  • As to the paddle wave maker, the system USES Linear module and AC servo to drive.

    对于摇板造波机,系统采用了交流伺服直联线性模组的传动方式。

    youdao

  • The simulation results show that the tracking error of middle-convex and varying ellipse piston linear servo drive system can be reduced effectively by this method.

    仿真结果表明,采用这种控制策略可以十分有效地减小中凸变椭圆活塞直线伺服驱动系统的跟踪误差。

    youdao

  • The hardware of the system is composed of Q-series PLC, graphic operation terminal F970GOT, intelligent positioning module QD75M4, and AC servo drive unit from Mitsubishi.

    系统硬件采用三菱公司Q系列plc、图示操作终端F970GOT、智能定位模块QD 75 M4及交流伺服驱动单元。

    youdao

  • DC servo system is the drive unit of vibration stimulation system. As the core of servo system, undoubtedly controller plays an important role to the whole system performance.

    双电机同步直流伺服系统是颤振激励系统的驱动单元,控制器作为伺服系统的核心,对整个系统性能的优劣起着非常重要的作用。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定