This is a serial port control of a program, very good program only for your reference.
这是对串口的控制的一个程序，很好的程序仅供大家参考。
Serial Port Control to achieve the temperature data acquisition and display, this program uses the Universal Serial VC6.0 control MSCOMM32.
串口控件实现温度数据采集并显示，本程序使用VC6.0的通用串口控件MSCOMM32。
IC card can be customized to ship, mobile payment, credit card payments or other payment methods. Support for 232 computer serial port control of the machine.
可定制IC卡出货、手机支付、信用卡支付或其它支付方式。机器支持232电脑串口控制。
Connect to the switch using the serial console port with a straight serial cable (9600, 8-n-1, no flow control) with default no user ID or password required.
用串口直连电缆连接到每台交换机的串行控制端口(9600、8 -N - 1、无流控制)，默认下不需要用户ID和密码。
Connect to the switch using the serial console port with a straight serial cable (9600, 8-n-1, no flow control).
用串口直连电缆连接到交换机串行控制端口(9600、8 - N - 1、无流控制)。
First, connect to each switch using the serial console port with a straight serial cable (9600, 8-n-1, no flow control) with a default user ID admin and no password.
首先，用串口直连电缆连接到每台交换机的串行控制端口(9600、8 -n - 1、无流控制)，使用默认用户IDadmin，无密码。
Gain Settings, signal polarity and RTD current control can be configured in software using the bidirectional serial port.
利用双向串行端口，可在软件中进行增益设置、信号极性选择和RTD电流控制配置。
The single chip processor accomplishes quantify control in real time, the coding system's controlling results is outputted through the serial interface port.
单片机实时完成量化控制。实验中通过串行通信接口输出编码系统的控制结果。
The voice recognition part is realized by software programming, the microcontroller is controlled by communicating with serial port, it can successfully realize to control the LED and voice broadcast.
语音识别部分由软件编程实现，通过串行口编程进行通信，控制单片机，它成功实现控制发光二极管和语音播放的目的。
RST PRO3 incorporates an onboard RS-232 Serial Port for remote control and data logging.
RST PRO3集成了一个内置的RS- 232远程控制和数据记录的串行端口。
The TLC320AD50C principles and main characteristic of the serial port of TMS320VC5402 are introduced and the configuration of control registers and their process of operation are analyzed.
介绍了音频模拟接口芯片TLC320AD50C的原理和使用注意事项，以及TMS320 VC 5402串行口的主要特点，并且详细分析了TMS320 VC 5402控制寄存器的配置和工作过程。
Serial port, early applied communications port, has been widely using in various fields as the industrial control and so on, just due to its special features of its easy realization.
串行接口作为一种应用较早的数据通信接口，由于其自身实现容易等诸多特性，现在已经在工业控制等诸多领域得到了广泛的应用。
This system can receive velocity instructions through serial port, then control the motors by a certain PID algorithm.
系统通过串口通讯方式获取小车速度指令，并PID控制算法对直流电机进行控制。
Aim at the insufficiency of traditional way of monitoring in industry field, designed a data acquisition and control system based on serial port communication.
针对传统工业现场监控方式的不足，设计了一种基于微机串行通信方式的数据采集和控制系统。
Will the VC to compile the serial communication control procedures, how to achieve the serial port parameters through the dialog box changes?
请问VC通信控件编写串口程序，怎样通过对话框来实现串口参数修改？
These drivers include Serial port, LCD, Touchscreen, and I2C bus driver which is used to control keyboard.
其内容包括串口驱动、LCD驱动、触摸屏驱动及控制键盘的I2C总线驱动。
Additionally, the serial port of MPU are extended by GM8123 to realize multi-module control.
使用GM 8123高速串口扩展芯片扩展核心微处理器串口，实现多模块控制。
The system adopts single main-station to control the serial ports under free port mode.
系统采用单主站方式，在自由口模式下控制串口。
Functions including control, serial communication and alarm are enabled with buttons and PLC output port on the instrument panel.
该仪表通过外部按钮或PLC输出接点可实现对仪表的控制、串行通信和报警等功能。
Based on serial port communication, a sort of long-distance control applications of MEMS packaging by laser was introduced.
介绍一种基于串口通信，激光封装MEMS芯片的远程控制应用方案。
The external communication and the control circuit mainly includes the serial port communication circuit and the CAN communication channel.
外部通信和控制电路主要包括串口通信电路和CAN口通讯电路。
A distributed stepper motor control system based on serial-port extender card is designed.
设计了一种基于串口扩展卡的分布式步进电机控制系统。
The software design include the serial port communication program design, stepper motors velocity curve control and the data acquisition program design.
在下位机软件设计中介绍了串口通信程序设计、步进电机速度曲线的控制和数据采集程序设计。
The serial port communication of GPS and the single-chip microcomputer and the control algorithm of single - chip microcomputer has been discussed.
着重论述了GPS和单片机串行通信和单片机控制程序问题。
The JTAG port and the RS232 serial port are designed to program in-situ. In teams of them, it is easily to adjust the circuit's working parameters or to update the control program.
整个系统可通过JTAG口和RS232串行通讯口进行现场编程烧录，能方便地调整电路的工作状态或实现硬件控制程序的升级、更新。
Abstract Serial port, early applied communications port, has been widely using in various fields as the industrial control and so on, just due to its special features of its easy realization.
【摘要】串行接口作为一种应用较早的数据通信接口，由于其自身实现容易等诸多特性，现在已经在工业控制等诸多领域得到了广泛的应用。
PC and MCU communicates through serial port RS-232C, and more the control to ultrasound instrument is accomplished.
通过RS-232C实现PC机和单片机的串口通信，进而实现了控制器对超声仪的控制功能。
And an RS-232C serial port allows for control of the projector from another computer or remote device.
和RS- 232 C串口允许从另一台计算机或远程设备投影机控制。
A serial port interface can be used to take control of the power supply, to set G1, G2 and G3 voltages, to select the XRII field, or to measure back the real electrode voltages (see chapter4).
一个串行端口接点可被用来控制电源，设定G 1,G2和G3电压，选择X线影像增强器视野，或延迟测量实际极间电压(看第4章)。
When the mouse to check the single lamp control area on the check button, the same way to transfer data through the serial port, the corresponding LED lights up, un-check after the light turns off.
当鼠标勾选单灯控制区复选按钮时，同理通过串口传输数据，相应的LED点亮，取消勾选后该灯熄灭。
应用推荐