• If no serial port is given then all ports are disabled for mouse devices.

    如果没有串行端口授予然后会将所有端口禁用鼠标设备

    gbigone.blog.163.com

  • To activate the serial port communication for kernel debugging, you need to modify the same kernel configuration file.

    为了激活串行端口通信以进行内核调试需要修改同一个内核配置文件

    www.youdict.com

  • It is important that you use a null modem cable; if you use a typical serial cable, the target computer expects a serial device and not another serial port, and you cannot debug the computer.

    有一点重要就是使用调制解调器电缆如果使用普通串行电缆目标计算机则期望串行设备通信,不是另一个串行端口通信,这样就无法调试计算机

    www.ibm.com

  • Like a serial port, each USB port on a computer is assigned a unique identification number (port id) by the USB controller.

    串行端口一样计算机usb端口US b控制器指定了惟一的标识数字(端口id)。

    www.ibm.com

  • The most obvious issue is that the interface in Listing 6 requires a JNI call for each bit set or retrieved, as well as a JNI call to read a byte from, or write a byte to, the serial port.

    显著问题就是清单6中的接口设置检索每个以及串行端口读取字节或者串行端口写入字节都需要JNI调用

    www.ibm.com

  • In the next dialog are options relating to the onboard serial port and debugging LEDs.

    下一个对话框中板上序列端口调试LED相关一些选项

    www.ibm.com

  • Typically, you connect a serial port to a serial device.

    通常串行端口串行设备连接

    www.ibm.com

  • I found a reference on a forum (see Resources) to someone who supposedly wired up a serial port, so that might be possible as well.

    论坛中发现参考文章(参考资料),适于连接串口的用户阅读,因此这种功能也是可用的。

    www.ibm.com

  • A serial port that identifies the serial port on the build server to which the base station is connected.

    一个串行端口标识构建服务器基站连接串行端口

    www.ibm.com

  • Set the IP address of each controller using the serial port at the back of each enclosure.

    使用每个封装背面串行设置每个控制器IP地址

    www.ibm.com

  • Serial port Settings (0a).

    串口设置(0A)。

    www.ibm.com

  • Protocol also handles the sending and receiving of messages using a datagram or serial port connection.

    Protocol处理使用数据串行端口连接消息发送接收

    www.ibm.com

  • Listing 2. minicom serial port setup menu.

    清单2 . minicom串行端口设置菜单

    www.ibm.com

  • For example, if we want to provide an interface to a serial port using JNI, we could come up with two different interfaces. One version is in Listing 6.

    举例来说,如果我们希望使用JNI某个串行端口提供接口,则可以构造两种不同接口

    www.ibm.com

  • The BlueZ hci_uart link driver talks with Bluetooth uart channels and connects the emulated serial port to the BlueZ stack.

    BlueZ hci_uart链接驱动程序Bluetoothuart通道交互模拟串行端口连接Blue z

    www.ibm.com

  • For USB GPRS modems, a USB-to-serial converter typically converts the USB port into a virtual serial port so the rest of the system sees it as a serial device.

    针对usbGPRS调制解调器而言,USB - to -serial转换器一般us b端口转换虚拟串行端口因此系统其他部分就会将看作串行设备

    www.ibm.com

  • If your host system has no serial port, use a DB9-to-USB cable.

    如果主机系统没有串行接口使用DB 9- to - USB电缆

    www.ibm.com

  • Initialize serial port (if present on the target).

    初始化串行端口(如果目标的话)。

    www.ibm.com

  • RFCOMM is better when you want to send and receive stream data (and when you'd like to take a traditional serial port application and Bluetooth-enable it).

    如果发送接收数据而且采用传统串口应用程序加上蓝牙支持),那么RFCOMM更好

    www.ibm.com

  • A desktop or laptop computer with a serial port (see the sidebar Notes on host platforms for more information).

    串口桌面计算机笔记本计算机(更多信息栏关于主机平台说明)。

    www.ibm.com

  • One common problem is that the null-modem cable could be connected to the wrong serial port.

    一个常见问题,空调解调器电缆可能会连接错误串口

    www.youdict.com

  • Early network Bridges, protocol converters, and routers were simple dedicated hardware units typically configured through a terminal directly connected to a serial port on the unit itself.

    早期网桥协议转换器路由器简单专用硬件设备通常是通过直接连接设备本身串口终端来配置的。

    www.ibm.com

  • Some hardware resources can easily be virtualized, such as the processor or storage, but other hardware resources cannot, such as a video adapter or a serial port.

    某些硬件资源可以轻松虚拟化比如处理器存储器另一些硬件资源则不然比如视频适配器串口

    www.ibm.com

  • Set the serial port connecting the host to the device under test.

    连接主机串口设置接受测试设备

    www.ibm.com

  • In the real world, RFCOMM should be used when you want to take a traditional serial port application and make it Bluetooth-enabled.

    现实世界中,如果使用传统串口应用程序使用蓝牙,就应当使用RFCOMM

    www.ibm.com

  • Individual USB ports could be isolated to a given domain, or a serial port (which is itself not shareable) could be isolated to a particular guest.

    单独US b端口可以给定隔离串口(自身不是可共享的)可以特定客户机隔离

    www.ibm.com

  • However, RFCOMM is the better choice when you want to send and receive stream data, just like you would with a traditional serial port.

    但是如果发送接收数据,则RFCOMM更好选择使用传统串口一样。

    www.ibm.com

  • The only way I have found to recover from this is to either log into the machine via the serial port and kill off the lock program, or hard-reboot the machine.

    发现解决问题,只能通过串口登录机器然后杀死程序或者强行重新引导机器

    www.ibm.com

  • This is particularly useful if you have a chatty kernel but a bandwidth-constrained console device (such as over a serial port).

    如果拥有非正式内核又使用带宽限制的控制台设备通过串口), 那么非常有用

    www.ibm.com

  • If your mouse USES a serial port, it helps if you know which port.

    如果鼠标使用串行端口如果知道移植帮助

    bbs.chinaunix.net

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定