MIDI controllers and synthesizers are connected using cables that allow the commands to be sent between devices using an asynchronous serial interface.
MIDI控制器与合成器通过电线相连接，利用异步串行接口可以在不同设备间传送命令。
By using this technology, you can create interconnections that are more flexible than the serial interface supported by the MIDI standard.
利用这种技术，用户可以创建互连网络，比MIDI标准支持的串行接口更具灵活性。
Additionally, since it is based on a serial interface, SAS allows for increased device support.
因为它基于串行接口，所以SAS允许增加设备支持。
If the instruments have a GPIB or serial interface, you can control them with a computer equipped with a similar interface.
如果设备具有通用接口总线或串行接口，你可以通过一个带有相似界面的计算机来控制。
This register defines the physical serial interface which will be used for data communications.
这个寄存器定义了将用于数据通信的物理串行接口。
The article introduces a design method of a general serial interface clock chip.
介绍了一种通用串行接口时钟芯片的设计方法。
The system can be divided into three modular by function, sensing data acquisition part, wireless data transmitting part, and universal serial interface part.
该系统从功能上可以分为数据采集模块、无线数据传输模块、通用串行总线接口传输模块。
The microprocessor adopts 89c52, and serial interface has adopted RS - 485, can download and debug online, and connect with other equipments.
微处理器采用89c52，并且串行接口采用了RS- 485，可以进行在线下载和调试，以及与其它设备的连接。
A single microcontroller controls the entire stack of battery monitors via the SPI-compatible serial interface, and it also is the gateway to the main CAN bus.
单个微控制器通过spi兼容的串行接口控制整组电池监视器，该微控制器也是至主CAN总线的网关。
The AD7656 has both a high speed parallel and serial interface allowing the devices to interface with microprocessors or DSPs.
AD 7656同时具有一个高速并行接口和一个高速串行接口，为器件与微处理器或DSP进行接口创造了条件。
The communication of the master computer and subordinative computer adopts RS232 serial interface, which adapt the long distance communication.
微机和下位机的通讯采用RS232串行接口，适用于远距离通讯。
When in Serial interface mode the AD7656 has a Daisy Chain feature allowing multiple ADCs to connect to a single serial interface.
在串行接口模式下，AD7656允许多个ADC以菊花链形式连接至单个串行接口。
If the serial interface is not able to generate an interrupt, set this value to any unused interrupt vector address.
如果串行接口是无法产生一个中断，将此值设置为任何未使用的中断向量地址。
Since most serial interface configurations are already predefined, it is extremely seldom that there is a need to modify the communication functions listed below.
由于大多数串行接口配置已经预先确定的，这是极为少见，有必要修改的通信功能列在了下面。
SPCE061A duplexing asynchronous serial interface of communication can realize many machine communication, make up step type control system all.
SPCE061A的全双工异步通讯的串行接口可实现多机通讯，组成了步式控制系统。
The hardware connection drawing of serial interface between MCU AT89C52 and LCD is illustrated.
给出了单片机AT89C52与液晶显示器件的串行接口硬件连接图。
The serial interface possesses the good qualities of connecting simply, using conveniently and data transferring credibly, so it has gained abroad appliance in real time control system.
串行接口由于其具有连接简单、使用方便、数据传递可靠等优点，在工业实时控制系统中得到了广泛应用。
The single chip processor accomplishes quantify control in real time, the coding system's controlling results is outputted through the serial interface port.
单片机实时完成量化控制。实验中通过串行通信接口输出编码系统的控制结果。
It is helpful to the designer of serial interface communication program of the real time clock device.
该方法对于实时时钟器件串行接口通信程序的设计具有一定的借鉴作用。
NC program edit and management are realized, and receiving NC program edited in other computer by RS232 serial interface is also achieved.
实现了数控程序的编辑和管理，以及通过RS232串行接口接收用户离线编写的数控程序。
The implementing of each module is introduced in principle. Some key problems are discussed with emphasis, such as video signal storing, DSP boot loading, asynchronous serial interface extending etc.
原理性地介绍了各模块的实现方法，重点讨论了视频信号的存储、DSP程序的引导装载、异步串行通信接口的扩展等关键性问题。
The function of serial communication port in protocol tester was analyzed and a programmable multi-protocol serial communication interface circuit was designed.
分析了网络协议测试仪的串行通信接口功能，设计了一种可编程多协议串行接口电路。
By connecting serial interface or something like that?
通过连接串行接口或类似的东西？
This thesis introduces the design and solution of liquid crystal display module based on serial interface, I2C bus interface and solidification Chinese word library.
介绍了一种基于串行接口和I2C总线接口，固化了汉字字库的液晶显示器模块的设计和实现方法。
The LTC6915 is a precision programmable gain instrumentation amplifier with rail - to - rail output. The gain can be programmed to 14 levels through a parallel or serial interface.
LTC 6915是具有14级可编程增益的仪表放大器，采用轨对轨输出，其增益可通过串行或并行接口方便设置。
Programming for setup and control is accomplished using a 3-bit SPI-compatible serial interface.
设置与控制的编程利用3位SPI兼容串行接口来完成。
The serial interface operates in internal clocking (master) mode, the AD7721 providing the serial clock.
串行接口在内部时钟(主)模式下工作，AD 7721提供所需的串行时钟。
There were two kinds of interfaces: parallel and serial interface mode, serial interface was mainly discussed and an example was given for designing.
接口控制形式有并行和串行两种，着重介绍串行接口控制，并给出设计实例。
The serial interface bus IEEE1394 with high performance has been used in multi-mainframe VXI test system.
高性能串行接口总线IEEE1394目前已用在多主机箱VXI测试系统中。
The serial interface bus IEEE1394 with high performance has been used in multi-mainframe VXI test system.
高性能串行接口总线IEEE1394目前已用在多主机箱VXI测试系统中。
应用推荐