Like a serial port, each USB port on a computer is assigned a unique identification number (port id) by the USB controller.
像串行端口一样，计算机上每一个usb端口都由US b控制器指定了一个惟一的标识数字(端口id)。
Set the IP address of each controller using the serial port at the back of each enclosure.
使用每个封装背面的串行口设置每个控制器的IP地址。
Chapter 4 Display system tells us the working theory of LCD screen controller SED1335. Chapter5-Communication introduces serial communication and USB communication.
第4章显示系统部分介绍了液晶屏控制器SED 1335的工作原理。第5章通信系统部分介绍了串行通信方式和USB通信方式。
Controller and sensor adopt 8-bit PIC serial single chip processor PIC16F84A and photoelectric interpretation device TLP909 respectively.
控制器和传感器分别采用8位PIC系列单片机pic 16f84 A和光电判读器TLP909。
SERCOS (SErial Real-time Communication System) is the serial real-time communication fieldbus between digital controller and servo-driver.
接口是数字控制器与伺服驱动器间的串行实时通信总线。
Also, it provides the application of serial communication controller (SCC) which realizes the interface circuit linking AM79101 and 51mcu, and its programs.
同时给出了应用双通道串行通信控制器(SCC)实现AM 79101与51单片机接口电路和应用程序设计。
This paper introduces the functions and work principles of serial clock chip DS1302, the design of interface circuit with AT89C51 single -chip microcomputer in the spray irrigation controller.
本文介绍了串行时钟芯片DS1302的功能和工作原理，并给出ds1302在灌溉控制器中与AT 89 C51单片机的接口电路设计。
Using the RS232 (9 pins) as serial interface can carry out the communication between computer and controller. This system adopts the binary form to transmit the data.
通过RS232（9）脚串口可实现计算机与控制器的双向通信，本系统采用二进制形式传输数据。
Aimed at this problem, a method of serial communication loading on HAD which is controlled by PCC (programmable computer controller) was proposed, and a novel experimental system was designed.
针对这一问题，提出了利用可编程计算机控制器(PCC)控制磁滞测功机实现串行通信加载的方法，并设计了一新型负载特性模拟实验系统。
The composition of MKS pressure control system, the communication commands and parameters of 651c controller and the method on building serial communication protocol macro are all introduced.
介绍了MKS压力控制系统的组成、651c控制器的通信命令参数、串行通信协议宏的构造方法。
At last the fundamental procedures of serial communication protocols between a PC and a DB1000 controller and the realization of serial communication function are discussed.
最后论述了PC机和DB1000控制器之间串行通信的主要流程以及串行通信功能的具体实现。
This controller system can link to PC by serial interface and can real-timely display data of all testing point.
该控制系统可以通过串口与计算机连接，实时显示各检测点数据。
The system makes use of MCS-51 single chip to design communication controller and oiling controller. Host computer inspects and controls oiling process through serial communication protocol.
该系统应用了MCS - 51系列的单片机，研制出通讯控制器和加油控制机，主机通过串行通信协议来对加油进行控制和监测。
The controller area network(CAN) is a high-speed serial bus system with real-time capabilities, widely used in several control systems.
CAN总线是一个具有实时性的高速串行总线系统，它被广泛应用于各种控制系统中。
The program is written based on my self-ST7920 LCD controller serial LCD driver.
本程序是本人自写的基于ST7920液晶控制器的串行LCD驱动程序。
Outputs serial data transferred from the PLL to the controller.
从PLL输出串行信号到控制器。
The serial communication controller-85C30 is introduced firstly. The design of 85c30 interface circuit can be found in this part.
首先介绍了串行通信控制器85c30，给出了85c30接口电路的设计。
The CSC controller board is a standard capacitive touch screen controller, which supports Serial and USB communication as well as all DMC capacitive touch screens with or without back shield.
附件是来自于DMC公司的电容式触摸屏控制器的用户手册，大概浏览了一下，对于想多了解一下控制器的人可能有点帮助。因此就发上来，供大家参考吧。
The board communicate with computer through the Universal Serial Bus(USB) by using CP2101, a highly-integrated USB-to-UART Bridfe Controller, which can realize Pcperpheral's plug & play.
采集卡利用一种高集成度的USB转UART桥接器CP2101芯片实现了通用串行总线（USB）接口方式，可实现计算机外设的即插即用特性。
It is composed of the microprocessor system and a serial port controller. The software is divided into main program and interruption program.
硬件结构由微处理器和串口控制器两部分组成，程序分为主程序和中断子程序两部分。
The controller main-board is designed with TMS320F2812 as its CPU, and also sets the serial interface and input and output of the switching value on it .
利用TMS320F2812作为CPU设计了控制器主板，同时引出了串口和开关量输入输出模块。
The paper introduced a kind of system based on the function of serial communication between the micro controller and PC. It can control a kind of big screen that made of LED.
介绍了一种利用PC机和单片机的串行口通信功能实现对LED大屏幕进行控制的系统。
Most micro-controller only has one hardware serial port.
大多数的微控制器只有一个硬件串口。
The experience of designing the serial communication program between PC and 89c51 micro-controller for the speed control of large DC motor is introduced by some examples.
通过实例，介绍为大型直流电机调速系统开发PC机与89c51芯片之间串行数据通信的经验。
The VXI slot 0 controller based on the IEEE 1394 serial bus is introduced. The basic principle, hardware structure, software structure and application of the slot 0 controller are described in detail.
介绍了一种基于IEEE 1394总线的VXI零槽控制器，详细说明了该零槽控制器的基本原理、硬件结构、软件结构及应用情况等。
The design methods of main controller circuit, serial port expanding circuit, RS-485 integrated transceiver, etc., are introduced as well as their chips.
分别介绍了主控制器电路、串口扩展电路、RS- 485集成收发器等的设计方法，以及电路芯片的选取。
Then mainly expatiates RTL8019AS Ethernet controller driver and serial interface driver of embedded communication platform; Finally, discusses the application program development and driver testing.
然后重点阐述了嵌入式通信平台RTL8019AS以太网控制器和串口驱动程序的设计方法，并分析了驱动程序的调试方法；
This controller can communicate directly with the PC computer through the serial port, or through the can interface helped with the CAN-USB conversion devices.
本控制器可通过串口直接与上位机通信，亦可借助于CAN- USB转换器件，通过CAN接口实现与上位机通信。
The system adopts C8051F020 single chip microcomputer to realize the communication with the robot principal controller by means of serial port.
系统采用C8051F020单片机实现，通过串口与机器人主控机通讯。
Micro-controller AT89C51 of the system which works in the serial ways can control the Baud rate that the data receiving and dispatching, and receiving and dispatching the data by way of interruption.
系统中数据的接收和发送工作在串行方式下，AT89C51可以控制数据收发的波特率，以及以中断方式控制数据的发送与接收。
应用推荐