Create a dialog box application support for serial control. MFC programming, can be run directly in the VC environment!
说明：建立支持串口控件的对话框应用程序。MFC编程，可在VC环境下直接运行！
The circuitry of PQS serial control panel for controlling lifting mechanism has some shortcomings in practice due to limitations in the original design.
用于控制起升机构的PQS系列控制屏线路，受最初设计时条件限制，在应用中存在一些缺点。
This paper studies the dynamic characteristics of Electro hydraulic Position Servo System, and proposes a method of equivalent flow feedback to realize serial control.
针对单回路电液位置伺服系统的动态特性，提出了一种等效流量反馈的控制方法，从而实现了串级控制。
The design adopts serial control mode, in this case there are only two controlling lines between the single chip microcomputer system and the driver of the step motor.
单片机对步进电机的控制有串行控制和并行控制两种方式。本设计采用的是串行控制方式，此方式下单片机控制系统与步进电机驱动器之间只有两条控制线。
The controllable adaptor includes casing and connecting circuit inside the casing, and features that partial connecting circuit is provided with serial control switch controlled outer control signal.
本发明包括外壳和安装在外壳内部的连接电路，其特征在于部分连接电路串联了受控开关，受控开关受连接到可控续接器的外部控制信号控制。
Connect to the switch using the serial console port with a straight serial cable (9600, 8-n-1, no flow control) with default no user ID or password required.
用串口直连电缆连接到每台交换机的串行控制端口(9600、8 -N - 1、无流控制)，默认下不需要用户ID和密码。
Connect to the switch using the serial console port with a straight serial cable (9600, 8-n-1, no flow control).
用串口直连电缆连接到交换机串行控制端口(9600、8 - N - 1、无流控制)。
First, connect to each switch using the serial console port with a straight serial cable (9600, 8-n-1, no flow control) with a default user ID admin and no password.
首先，用串口直连电缆连接到每台交换机的串行控制端口(9600、8 -n - 1、无流控制)，使用默认用户IDadmin，无密码。
If the instruments have a GPIB or serial interface, you can control them with a computer equipped with a similar interface.
如果设备具有通用接口总线或串行接口，你可以通过一个带有相似界面的计算机来控制。
We also prepare a Stock Control Sheet showing the dates of in and out, quantities and serial numbers of goods.
我们还准备了一张存货控制单，上面记载货物进出日期、质量、序列号。
It is a kind of effective serial communication network which supports distributed control or real-time control.
它是一种有效的支持分布式控制或者实时控制的串行通信网络。
Can is a serial Communication network that can effective support distributed control and real-time control.
CAN是一种有效支持分布式控制和实时控制的串行通信网络。
Findally, we implement SDM300 remote control module and Async communication module on the basis of introducing technology of serial programming , RS485 bus driving mode and RS485 serial driver.
介绍了串口编程技术，RS485总线驱动模式和RS485串口驱动程序。 然后在此基础上设计和实现了SDM300远程控制模块和异步信道的通信模块。
Shanghai University has developed a kind of robot, whose control system consists of a master-slave computer system based on the serial communication between VB and microcontroller.
上海大学研制成功的球面机器人控制系统采用了基于VB与单片机的串行通信的两级计算机控制。
The single chip processor accomplishes quantify control in real time, the coding system's controlling results is outputted through the serial interface port.
单片机实时完成量化控制。实验中通过串行通信接口输出编码系统的控制结果。
SERCOS is a communicating protocol with serial and re - al-time communication for synchronous control.
SERCOS是一种用于同步控制的串行实时通信协议。
This is a serial port control of a program, very good program only for your reference.
这是对串口的控制的一个程序，很好的程序仅供大家参考。
Can bus is a kind of network of the asynchronous serial communication that can effectively support the distributed control and the Real_time and the multi-master control.
CAN总线是一种有效支持分布式控制和实时控制的、多主的异步串行通信网络。
An effective scheme for organizing CNC (Computerized Numerical Control) equipment network using serial device server is introduced.
提出了利用串口设备服务器实现普通数控设备联网的有效方案。
CAN bus is a serial communication protocol and ADAPTS to bottom layer communication of distributed control system.
CAN总线是一种串行通讯协议，适用于分布式控制系统的底层网络通信。
The CAN is a serial communications protocol which efficiently supports distributed real time control with a very high level of security.
CAN是具有很高的安全水平、能有效支持分布式实时控制的一种串行通信协议。
This paper mainly introduces signal acquisition of height-feedback and data exchange of HMI using PLC's serial communication module in stage suspender; control system.
本文介绍了在舞台吊杆控制系统中，利用PLC的串行通信模块完成位置反馈信号采集和人机界面数据交换。
Serial category with a serial communication control, the reception of the GPS navigation data analysis information.
用一个串口类控制串口通讯，通过对接收的GPS数据分析导航信息。
By serial communication, the cooperative control of welding parameters is realized between PLC and microcontroller.
通过串行通信，PLC和单片机之间实现了对焊接参数的协调控制。
Transmitting and receiving circuits and serial communication and control interface between PC and microcontroller are described in detail.
详细介绍了光发送、光接收电路和单片机与微机的串行通信控制接口。
A multiplex control system based on serial entry and output in series-parallel mixed mode is designed.
设计一种以串行输入为基础，串并混合方式输出的多路控制系统。
CAN Bus is one kind of serial communication Bus which support distributed control and real-time control effectively.
CAN总线是一种有效支持分布式控制和实时控制的串行通信总线。
This system can receive velocity instructions through serial port, then control the motors by a certain PID algorithm.
系统通过串口通讯方式获取小车速度指令，并PID控制算法对直流电机进行控制。
In host computer control system, mainly achieve choice of serial communication control, the collection of real-time data updating display and historical data charts analysis.
在上位机监控系统中，主要完成的是对通信设置的选择控制、现场采集数据的实时刷新显示等。
In host computer control system, mainly achieve choice of serial communication control, the collection of real-time data updating display and historical data charts analysis.
在上位机监控系统中，主要完成的是对通信设置的选择控制、现场采集数据的实时刷新显示等。
应用推荐