The serial cable must be long enough to connect the computers together.
使用并行或串行电缆连接到其他计算机上。
Provides a connection to other computers via a parallel or serial cable.
使用并行或串行电缆连接到其他计算机上。
The serial cable must be long enough to connect the computers together.
网络电缆必须够长，可以将计算机连接在一起。
The easiest way to connect your computers is to use the null modem serial cable.
连接计算机的最容易的办法是使用假调制解调器串行电缆。
A null modem cable is a serial cable that allows data to be sent between two serial ports.
零调制解调器电缆是一种允许在两个串行端口之间发送数据的串行电缆。
Null modem is a communication method to connect two computers directly using a RS-232 serial cable.
零调制解调器 (Null modem)是一种使用RS-232串行电缆连接两台计算机的通信方式。
Connect to the switch using the serial console port with a straight serial cable (9600, 8-n-1, no flow control).
用串口直连电缆连接到交换机串行控制端口(9600、8 - N - 1、无流控制)。
Connect the serial cable to the BeagleBoard-xM's DB9 port and your host, and launch minicom in setup mode as root.
将串行电缆连接到BeagleBoard - xM ' s DB 9端口和您的主机上，然后在设置模式下以根用户启动minicom。
The BeagleBoard-xM provides a female DB9 port and requires a serial cable to connect the console to your host system.
BeagleBoard - xM提供一个DB 9凹口(female DB9 port)，需要一个串行电缆来将控制台连接到您的主机系统。
The disks used to store the data must be connected by a private interconnect (serial cable) or LAN to the servers that make up the cluster.
用于存储数据的硬盘必须通过私有互联结构（串行线缆）或者LAN连接到构成群集的服务器。
Connect to the switch using the serial console port with a straight serial cable (9600, 8-n-1, no flow control) with default no user ID or password required.
用串口直连电缆连接到每台交换机的串行控制端口(9600、8 -N - 1、无流控制)，默认下不需要用户ID和密码。
First, connect to each switch using the serial console port with a straight serial cable (9600, 8-n-1, no flow control) with a default user ID admin and no password.
首先，用串口直连电缆连接到每台交换机的串行控制端口(9600、8 -n - 1、无流控制)，使用默认用户IDadmin，无密码。
It is important that you use a null modem cable; if you use a typical serial cable, the target computer expects a serial device and not another serial port, and you cannot debug the computer.
有一点很重要，那就是要使用零调制解调器电缆，如果您使用普通的串行电缆，目标计算机则期望与串行设备通信，而不是与另一个串行端口通信，这样您就无法调试该计算机。
The C-64 would send commands to the drive which in turn would then execute them on its own, reading files, and such, then send the data to the C-64, all over a propriatory serial cable.
准将64向该软驱发送命令，它会将它们在本地执行，进行读文件等操作，然后通过一条专有串行总线，将数据发送给准将64。
When you use a null modem to make a direct serial connection between two computers, your cable must be wired, as shown in Listing 1 below.
当您使用零调制解调器电缆在两台计算机之间建立直接串行连接时，您的电缆必须按下面清单1中显示的方式连接。
Users connect the glasses to a PC via a 10-foot-long universal serial bus 2.0 cable.
用户可以通过10英尺长的通用的串行总线2.0电缆把眼镜连接到PC机。
You will need the device for which you are writing the driver and a null-modem (serial) cable for remote debugging.
需要有一个正在为其开发驱动程序的设备，以及一根串口线来进行远程调试。
A serial line (null-modem cable) connects the machines through their serial ports.
一条串行线(空调制解调器电缆)将通过机器的串口连接它们。
If your host system has no serial port, use a DB9-to-USB cable.
如果您的主机系统没有串行接口，使用DB 9 - to - USB电缆。
Use a null modem cable to connect the two nodes through their serial ports. Now test the serial connection, as follows.
通过两个节点的串口，使用一根直连线缆将它们连接起来。
One common problem is that the null-modem cable could be connected to the wrong serial port.
一个常见的问题是，空调制解调器电缆可能会被连接到错误的串口。
One IBM serial null modem cable
一根 IBM串口直连线缆（serial nullmodem cable）。
A null modem cable connected between the serial ports of the two systems is used to transmit heartbeats between the two nodes.
两个系统的串口之间的直连线缆用来在两个节点间传输heartbeat。
This EVM can use either a USB serial port or the standard DB-9 (use the cable shipped with the platform).
该EVM可以使用US B串行端口或标准的DB - 9(使用平台附带的电缆)。
It is a kind of cable bus which can process the communications between computer and peripheral equipments. USB is a general serial bus with PC standard.
它是一种可以同时处理计算机与具有USB接口的多种外设之间通信的电缆总线，USB已成为目前PC标准的通用串行总线。
Connect printer to the serial port (back panel) using the supplied cable and turn it on.
连接打印机的串行端口(背板)使用提供的电缆和打开它。
After video information read by FPGA, serial video information is transformed into parallel format by Bit-Plane Separation technology first, and then sent to video cable.
在FPGA读取视频信息后，先用位面分层技术把串行视频信息转换为并行数据再送到视频电缆上。
The principle and working process of a FM serial resonance device was introduced and its application no AC withstand voltage test of high voltage XLPE insulated cable was also discussed.
介绍一种调频串联谐振装置的原理及工作过程，并在高压交联聚乙烯（XLPE）绝缘电缆交流耐压试验中应用。
For this procedure you connect the serial converter with the large ribbon cable.
为了进行这一操作，你要把带排线的串口转换装置连接至板上。
The wire-line coring tool of HSQ serial has kept up the technical features of conventional placer drills and derived the advanced structure from steel cable fishing tool for inner barrel.
HSQ系列绳索取心钻具，既保持了现用砂钻钻进的工艺特点，又发挥了钢绳打捞内管技术的方便性。
应用推荐