A sensor channels the light signal along an optical fibre.
传感器沿光导纤维输送光信号。
In both single sensor and triple sensor designs, the weak signal created by the sensors is amplified.
在单传感器和三传感器设计中，传感器产生的微弱信号都会被放大。
Then they gave each traffic signal a sensor that provides information about traffic at a given moment.
然后，他们给每个交通信号灯装上传感器，用以了解特定时段的路面信息。
This system is constituted with the optical fiber sensor, signal detection electric circuit, single chip processing circuit and display unit.
该系统由光纤传感器、信号检测电路、单片机处理电路和显示装置组成。
While adjusting, it can measure the system according to the voltage of sensor signal that the instrument shows.
标定时可根据仪表显示的传感器信号电压进行系统检测。
The fiber grating sensing system consists of four parts, Broadband Light-source, FBG/LPG based sensor, Signal demodulation section and Signal process section.
光纤光栅传感系统一般包括光源、传感器（光纤光栅）、光路解调部分、数据采集分析终端等部分。
Design and implementation of FBG sensor signal processing and collection system.
FBG传感信号处理及采集系统的设计与实现。
In the processing of multi channels sensor signal, the problem of multi channels alignment may be confronted.
在多路传感器信号处理的过程中，会遇到多通道对准的问题。
According to the characteristics of sensor signal output, data acquisition of treatment.
该文根据传感器信号输出的特点，进行数据采集的处理。
During developing well depth measurement system for mud logging unit, it directly affects the accuracy of well depth measurement whether winch sensor signal processing is rational or not.
井深测量是综合录井最为重要的参数之一，在录井仪井深测量系统研制过程中，绞车传感器信号处理是否合理，将直接影响井深测量的精度。
Adopting the reactive circuit of twice harmonic to process the sensor signal, the system is closed loop.
对传感器信号处理采用的二次谐波反馈电路，电路为闭环系统。
The sensor signal affects the frequency converter in such a way that the draw-off speed of the foil remains constant.
传感器信号以这样一种方式影响变频器，使牵引箔的速度保持不变。
Based on the analysis of the sensor signal, the frequency spectrum is analyzed with SD-380 dynamic analyzer.
在分析传感器信号的基础上，用SD- 380动态分析仪对信号作了频谱分析。
This mixed mode interface combines the traditional analog sensor signal with a low cost serial digital link to access a transducer electronic data sheet (TEDS) embedded in the sensor.
这个混合模式的接口把传统的模拟传感器信号与低成本的串行数字连接结合在一起，以访问传感器的内嵌的传感器电子数据表（TEDS）。
This paper introduces two methods to get the virtual sensor signal of angle of attack and sideslip angle: Nonlinear Observer method and INS/GPS method.
本文介绍了两种方法来得到迎角和侧滑角的虚拟传感器信号：非线性观测器方法和利用INS／GPS系统数据估计迎角和侧滑角方法。
Under this background, we try to review recent progress in study on acoustic vector sensor signal processing, such as signal detection, DOA estimation, beamforming, and so on.
在此背景下，本文尝试综述声矢量传感器信号处理研究的当前进展，如信号检测、DOA估计、波束形成等。
Sensor signal adjustment is used to adjust the direct output signal of sensors. The principle of signal adjustment and the hardware circuit implementation are both discussed in this paper.
传感器信号调理是对传感器直接输出的信号进行调节，信号调理的原理以及硬件实现电路在文中都做了说明。
Hardware compensation and software compensation methods for nonlinearity in the sensor signal are introduced.
针对传感器信号中存在的非线性误差，介绍了硬件补偿和软件补偿两种方法。
Adopt PID's control algorithm in the wind pressure control, has been underway the nonlinear compensation to the sensor signal.
风压控制中采用了PID控制算法，对传感器信号进行了非线性补偿。
The main function of hardware component is to obtain the signals of pressure sensor signal, oxygen sensor signal and the front and back emission components of catalytic converters.
硬件部分主要功用是获取压力传感器信号、氧传感器信号以及催化器前后端的废气成分，并把数据实时的传输给电脑。
The ZMD31020 is a special sensor signal processor optimized for piezoresistive sensor nonlinearity and temperature compensation.
利用ZMD31020传感器信号处理器，实现了硅压阻式传感器的非线性及温度补偿。
The paper points the reason of researching the problem of sensor signal management, introduces the different sensor signal on wireless home security system and gives the resolving methods.
针对传感器信号的管理问题提出了研究它的必要性，详细介绍了无线家庭安防系统中存在的各种传感器信号，并给出了具体的解决方案。
Its hardware interface includes sensor signal condition circuits and the motherboard constructed by AD574A, 89c52, 8255a, etc.
硬件部分包括各传感器信号调理电路模块以及由AD 574a, 89c 52,8255 A等构成的主板模块。
Methods: Computer, opto-electronic sensor, signal processing circuit, digital display circuit and a mechanical gate driven by motor are used with common intavenous drips.
方法：将单片机控制技术和传统的输液器相结合，采用光电传感器、信号处理电路、单片机控制系统、马达伺服电路和机械闸门、数字显示等技术。
The audio frequency inspection system is mainly composed of the impulse excitation device, acoustic sensor, signal conditioning circuits, data acquisition card and micro-computer and so on.
音频检测系统主要由脉冲激励装置、音频传感器、信号调理电路、数据采集卡和微型计算机等部分组成。
These solutions respectively base on ICs of Op Amp, instrumental Amp and full-integrated sensor signal conditioner, meet different-level products requirements.
这些设计方案分别基于运算放大器、仪表放大器以及集成一体化的传感器信号调理器等集成电路，分别满足不同档次的产品要求。
Analysis indicates that nonuniform intensity introduces some error into wavefront curvature sensor signal.
分析表明光强非均匀分布给波前曲率传感器测量信号带来了一定的误差。
And this system is composed of some essential elements such as sensor, signal-modulating circuit, hardware of DAQ, general computer, relative software and so on.
DAQ式虚拟仪器自动测试系统是由传感器、信号调理、数据采集硬件、通用计算机、软件等基本要素构成。
The ECU (20) calculates a rotation speed of a crankshaft (17) in a predetermined period based on the sensor signal.
ECU(20)根据传感器信号在预定时间内计算出曲轴(17)的旋转速度。
By programming the FPGA, we finished the hardware control cooperating with the DSP, the OSD function, the collection and dealing with the ultrasonic sensor signal.
主要对FPGA进行编程设计，配合DSP完成了系统硬件控制、OSD以及超声波雷达信号的采集、处理等功能。
应用推荐