Morphological structure was observed by SEM and TEM.
用电子显微镜(SEM、TEM)，观察了形态结构。
The changes of ultrastructure were observed by SEM and TEM.
扫描电镜和透射电镜观察细胞超微结构的变化。
The fractograph and dislocation were observed with SEM and TEM.
利用SEM观察疲劳断口和TEM观察位错形貌。
The structure of the carbon nanotubes was represented with SEM and TEM.
利用SEM和TEM对纳米碳管的结构进行了表征。
Both SEM and TEM of the paraventricular organ have been made in 8 rats.
对8例大鼠第三脑室室旁器官进行了扫描和透射电镜观察。
Microstructures of the preform and the composite were analyzed under SEM and TEM.
利用SEM和TEM等方法对晶须预制块和复合材料进行了微观组织结构分析。
The fractograph and dislocation morphology were observed by means of SEM and TEM.
利用SEM观察疲劳断口和TEM观察位错形貌。
Abstract: The microstructure of forged white cast iron was observed and investigated by means of SEM and TEM.
文摘：借助扫描电镜、透射电镜观察和分析了白口铸铁的微观组织。
A mechanism of wood vein pattern colouring on 6063 aluminium alloy is presented based on SEM and TEM observation.
借助于金相、扫描电镜、透射电镜等分析技术，建立了6063挤压铝合金木纹着色的机理模型。
Observations by SEM and TEM show that organic and inorganic coatings are obtained on the aligned carbon nanotubes.
对所镀的膜层进行了扫描电镜和透射电镜观察，结果表明：在纳米碳管表面获得了均匀的有机和无机涂层。
The phase structure, morphology and domain-structure of samples are investigated using XRD, SEM and TEM respectively.
同时利用XRD,SEM和TEM分别对陶瓷的相结构，形貌和畴结构进行了研究。
The microstructure of rods sintered in vacuum and by sinter-HIP was investigated by metallographic microscope, SEM and TEM.
用会相显微镜、SEM和TEM观察了真空烧结、低压烧结试样的显微结构。
The microstructure of Twinning Induced Plasticity (TWIP) steel during tensile deformation was investigated with SEM and TEM.
采用扫描电镜、透射电镜对TWIP钢的拉伸变形过程中的孪晶进行了观察。
The effect of garlic on three kinds of pathogenic bacteria (S. aureus, S. flexneri and E. coli)was observed with SEM and TEM.
用扫描电镜和透射电镜，观察了大蒜对三种细菌作用的形态学改变。
Heat resistance, curing reaction, and morphology of the modified phenolic resin system were characterized by TG, DSC, SEM and tem.
借助TG、DSC、SEM和TEM对改性酚醛树脂体系的耐热性能、固化反应和微观形态进行了表征。
The SEM and TEM photograph are conducted to analyze structure and phase of coating and explains why this coating can improve work life of router.
采用SEM和TEM法，分析了镀层的组织与相结构，揭示了镀层提高铣刀寿命的原因。
Taking advantage of advanced SEM and TEM technology and modern TFD theory, explanation to microscope bonding mechanism of cold pressure welding was made.
利用近代界面及表面电子结构理论(改进的TFD理论)和现代先进分析测试技术对冷压焊结合的微观机理进行了分析。
SEM and TEM examination showed that the graphite in low carbon ductile iron formed nucleus and grew up based on the sulfide and oxide of manganese and calcium.
结果表明：低碳球墨铸铁中的石墨是以锰、钙等的硫化物与氧化物作为基底形核并长大形成的。
The microstructure examined by SEM and TEM indicates that the increase in bending strength is found to be dependent on the load shift from matrix to the whisker.
用SEM和TEM观察了材料的显微结构，指出弯曲强度增加是由于荷载从基体转移到晶须。
The density change and mechanical properties during the rolling process at ambient temperature were examined, and its microstructure was observed by SEM and tem.
探索了板材轧制过程中材料的密度变化规律及室温力学性能，通过金相、扫描电镜和透射电镜观察了其微观组织。
Mechanical properties testing, SEM and TEM was used to study the effects of cold rolled reduction and aging temperature on the cohesion of the weak interface of DISC.
通过力学性能测试、扫描电镜及透射电镜观察，研究了冷轧压下量及时效温度对内生复合钢板弱界面结合强度的影响。
From observation of light microscope, SEM and TEM revealed the predominant bacteria of various groups, and element composition of granular sludge was analysed by EDXA.
光学、扫描电子显微镜和透射电子显微镜观察揭示出各生理群的优势菌，并用能谱仪对颗粒污泥的元素组成进行了分析。
Microphase separated structure of blends has been determined by means of VES. DSC, SEM and TEM. Blood compatibility of the blends was evaluated by column beads method.
采用动态力学谱（VES）、示差扫描量热（DSC）、透射电镜（TEM）和扫描电镜（SEM）等测定共混物的微观结构，采用微球柱法评价共混物的血液相容性。
The structure and properties of untreated and treated PAN precursors and resultant carbon fibers were characterized by SEM and TEM, stabilization process and so on. It…
利用SEM、TEM和热稳定化过程研究等方法进行对比研究改性前后纤维的结构与性能。
The micro-mechanism of short crack and the influence of micro-structures on short crack propagation have been investigated by OM, SEM and TEM for a LY12CZ Aluminium alloy.
通过扫描电镜、透射电镜、光学金相等手段对LY12CZ铝合金疲劳短裂纹的微观机制进行了分析研究，结果表明，材料的微观组织对短裂纹扩展行为有很大影响。
The microstructures of the as-cast and quenched alloys were analyzed by XRD, SEM and TEM, and electrochemical cycle stability of the as-cast and quenched alloys were measured.
贮氢合金，用XRD,TEM及SEM观测了铸态及快淬态的微观结构，测试了合金在铸态及快淬态下的电化学循环稳定性。
The plated sheet can be used to prepare the specimen for optical microscopy, SEM and TEM, it can also be used for the heat-treatment and the microhardness test of the powders.
电镀薄片可以用来制备光学显微镜、扫描电镜及透射电镜的观察样品，而且可以用来进行粉末的热片进及业余末的显微维氏硬度测试等实验。
Effect of martensite volume fraction on deformation dislocation structure and fracture for hot rolled dual-phase steel of the same composition was studied by using SEM and TEM.
利用SEM、TEM研究了同一成分的热轧双相钢的马氏体体积分数对形变位错结构和断口组织特征的影响。
The effects of plastic deformation prior to artificial aging on the microstructure and tensile properties of 2197 Al-Li alloy were investigated through tensile test, SEM and TEM.
通过力学性能测试，扫描电镜、透射电镜观察等手段，研究了固溶淬火后不同程度预变形对2197铝锂合金力学性能及显微组织的影响。
The effects of plastic deformation prior to artificial aging on the microstructure and tensile properties of 2197 Al-Li alloy were investigated through tensile test, SEM and TEM.
通过力学性能测试，扫描电镜、透射电镜观察等手段，研究了固溶淬火后不同程度预变形对2197铝锂合金力学性能及显微组织的影响。
应用推荐