With the help of SEM-EDS and XRD, the composition, structure and performance were analyzed.
利用SEM - EDS,XRD等测试手段对熟料的组成、结构及性能进行了分析。
The mineral constituents and structures of the clinker were analyzed by the means of XRD, SEM-EDS.
利用XRD，SEM-EDS等测试手段分析了该水泥熟料的组成和结构。
Ancient human bones in Xigongqiao Site, Tengzhou, Shandong Province, were analyzed by use of SEM-EDS.
采用SEM - EDS技术，分析了山东滕州西宫桥遗址出土的古代人骨。
To examine different brands of lipsticks by SEM-EDS technique, we need to choose appropriate conditions for experiments.
采用SEM—EDS技术对不同品牌的口红进行检验，需选择出较为合适的实验条件。
The results of linear SEM-EDS indicated that the content of iron in the red pottery coating was remarkably higher than that in the inner adobe of pottery.
电子探针线扫描分析的结果表明，红色陶衣中铁的含量明显高于内部坯体。
The hydration products and microstructure of hardened paste of XAN-RC high-temperature sealant were investigated using XRD, TG and SEM-EDS under the condition of high temperature and high pressure.
利用XRD、TG和SEM-EDS对XAN-RC高温堵漏剂在模拟实际作业环境的高温高压条件下水化的水化产物和硬化浆体微观结构进行了分析，对其高温堵漏机理进行了讨论。
This paper analysed the pattern and composition of residual metal in diamond fracture surface by ways of Scanning Electron Microscope (SEM) and Energy Dispersion Spectrum (EDS).
采用扫描电镜(sem)和能谱(EDS)分析方法，分析了国内六种代表性的金刚石断面上残留触媒的形态及成分。
The effects of RE compound modificator on the mechanical properties and microstructure of high carbon high speed steel used for roller ring were investigated by SEM, EDS and EPMA.
通过扫描电镜、能谱分析仪和电子探针研究了稀土复合变质剂对离心铸造的高碳高速钢轧辊组织和力学性能的影响。
The particle size of doped tungsten and distribution of rare earth were studied by means of SEM, EDS, XRD and granularity analysis.
采用电镜、能谱、X射线衍射分析、粒度分析等方法研究了掺杂钨粉的粒度及稀土元素的分布。
The methods of visual inspection, SEM, X-ray EDS, metallography and chemical composition analysis were adopted to research the rupture of flexible metal hose.
采用宏观检查、扫描电镜、X射线能谱、金相检验、化学成分分析等方法，对金属波纹软管开裂的原因进行分析。
The SEM and EDS were used in this paper to analysis the welding interface of the specimens of tungsten and copper, copper and stainless steel made by HIP welding.
用扫描电子显微镜和能谱仪对钨和铜以及不锈钢的热等静压焊接试样的焊接界面进行了分析研究。
Cracking of H13 steel die blank for fan impellers was analyzed by means of SEM, EDS and metallographic microscope.
通过电镜、能谱分析、金相分析等手段对H13钢制风机叶轮模坯开裂进行了综合分析。
The phase contents, microstructure of the samples, and their relationship with mechanical properties were investigated by X ray diffraction, SEM, and EDS.
并采用x射线衍射分析、扫描电镜及能谱分析研究了该样品的机械性能与相组成和微观结构的关系。
The surface defects of silver COINS was analysed with auger electron spectroscopy (AES), Scanning electronic microscope (SEM) and energy dispersive spectrum (EDS).
采用扫描电镜、能量色散谱和俄歇电子能谱检测方法，对银币表面缺陷进行了分析。
The microstructure and solute concentration distribution of solidified layers is studied by means of optical microscope, SEM and EDS analysis methods.
借助于光学显微镜、扫描电镜和EDS能谱分析等方法研究了熔凝层显微组织和溶质浓度分布。
By tests of XRD, SEM, EDS, this processing technology has the advantages of high transformation, good processing capability and lower pay out and so on.
产品通过X射线衍射(XRD)、扫描电镜(sem)、能谱仪(EDS)测试，说明块料直接煅烧法生产的方石英具有转化率高、加工性能好、成本低等特点。
To solve the problem of abnormal temperature rise of generator stator slots, unknown foreign powder in the 300MW generator stator water cooling system was characterized and analyzed by SEM and EDS.
为解决发电机定子线圈槽的异常升温现象，利用扫描电子显微镜、能谱仪等现代分析手段对300MW发电机定冷水系统不明异物进行了表征和分析。
The facture failure of the slab was analyzed by means of metallographic microscope, SEM and EDS.
采用金相检验、扫描电镜观察和能谱分析等方法对断坯进行了分析。
The section morphology and peeling intensity of electroless nickel deposit were analyzed by means of SEM and EDS.
采用SEM、EDS等实验手段分析了化学镀镍层的断面形貌和剥离强度。
The morphology of the powders was studied by SEM and EDS, on which the discussion of grain refinement mechanisms is based.
利用SEM和能谱分析，研究了其微观形貌的变化，并对球磨粉末的晶粒细化机理进行了一定的研究。
The products obtained at different conditions were characterized by means of TEM, SEM, XRD, EDS and the thermal stability of the products was tested.
用TEM、SEM、XRD和EDS等对不同工艺条件下获得的产物进行了表征，对其热稳定性进行了测试。
This paper deals with the massive defect of facing of 92507 bearing internal ring was analysed by means of OM, SEM and EDS.
本文针对92507轴承内圈端面上的块状物缺陷，采用OM,SEM和EDS等方法进行了分析。
The effect of heat treatment on electrical conductivity of Cu based multi-component alloy was studied by metallographic microscope, TEM, SEM/EDS, XRD and conductance instrument.
借助金相显微镜、TEM、SEM/EDS、XRD及电导仪研究了热处理对铜基多元合金导电性能的影响。
The characteristics of the composite partilces, including surface morphology, structure and surface components, were investigated by XRD, SEM, EDS and BET.
并运用XRD、SEM、EDS、BET等仪器对复合粉末的形貌、 物相结构及表面成分进行分析。
The methods of metallography, SEM and EDS were employed to analyze the inside surface of the "Bai Hua" pop top can made of aluminum.
采用金相、扫描电镜及能谱仪等测试方法，对铝质易拉罐内侧表面进行了分析。
Microstructures and grain's chemistry compositions of samples were tested by SEM and EDS methods.
采用SEM和EDS测试其显微结构和晶粒的化学组成。
SEM and EDS indicate a homogeneous distribution of the composite.
SEM及EDS分析表明该复合材料成分分布均匀。
The deposited layer was characterized by SEM, EDS, XRD and the acoustic emission scratching method.
采用光学显微镜、SEM、EDS、XRD、声发射划痕等测试手段对渗镀层进行分析。
The deposited layer was characterized by SEM, EDS, XRD and the acoustic emission scratching method.
采用光学显微镜、SEM、EDS、XRD、声发射划痕等测试手段对渗镀层进行分析。
应用推荐