The second selection circuit connects the first bit line to the source side sensing circuit so that a source current of the first memory cell is sensed.
以及一第二选择电路，用于该读取操作模式，连接该第一位线至该源极端感测电路以感测该第一存储单元的源极电流。
This paper give a detailed schematic design, parameter selection, as well as the welding circuit.
本文主要给出了详细的设计原理图、参数的选择、以及电路的焊接。
From this study, some rules for selection of the transistors and circuit elements were obtained.
从这个研究中得到了挑选晶体管和电路的一些原则。
The PWM chopper circuit and the selection of power switching elements, protecting circuits, driving units and software programming are given out.
主要内容包括PWM斩波电路结构及功率开关器件的选择，驱动电路，保护电路以及软件编程。
The design of CAN bus hardware interface circuit based on SJA1000, the selection of chips, the design of software and the realization of CAN communication are expatiated.
论述了基于SJA1000的CAN总线的硬件接口电路的设计、芯片的选择、软件设计及CAN通信的实现。
Selection of part of a wave on account of time or magnitude. Operation of a circuit when one wave allows another to pass during specific intervals.
根据时间或幅度选择波形的一部分，即在一个特定的间隔里一个波形允许另一个波形通过电路的动作。
Selection of DC chopper main circuit, hardware and software design of special purpose microcomputer are discussed.
对直流斩波器主电路如何选择专用微型计算机硬件和软件设计进行了讨论。
In this article an audio controller, which USES digital circuit technology instead of original analogue components to control channel selection and volume adjustment, is proposed.
提出了一种采用数字电路技术，替代原来的模拟元器件控制音响的声道选择和音量调节的音响控制器。
In this paper the algorithm selection of maximum entropy spectral estimation circuit in digital signal processing system is investigated.
本文针对数字信号处理系统中最大熵谱外推电路的算法选择进行了研究。
Based on it, the selection of design scheme of fuses and circuit breakers were given out.
在此基础上，给出了设计中有关熔断器和断路器的选型方案。
Through the fine circuit design and device selection, the experiment features in volume, power consumption, the quality of the image and the sensitivity are obtained.
通过合理的器件选择和电路设计，其在体积、功耗、图像质量、灵敏度等方面都有着较好的表现。
Selection of main components for the power circuit is studied.
对主电路主要电器的选型作了研究。
Details of the sensor's structure, its working principle, the selection of working mode as well as the signal processing circuit is presented.
详细介绍了传感器的结构、工作原理、工作模式的选择以及信号检测电路。
The technique plays an important role in the proper selection of parts, thermal electrical stress control in the circuit design and derating.
说明这一方法对元器件的正确选择、电路设计中热电应力的控制和降额等可靠性设计起主导的作用。
It was shown that appropriate selection of sharpening capacitor and circuit inductance would decrease the current-pulse length without any harm to the thyratron.
适当选择锐化电容和回路电感量，可以使放电电流脉冲变窄而又不加重闸流管的负担。
The circuit, through evaluating the input voltage and controlling the selector of the measuring scale, realizes automatic selection in high precision instrument.
该电路通过对被测电压的判断和量程选择器的控制，实现了在高精度仪表中量程的自动选择。
The performance of pressure sensor lies on the design of sensitive girder, selection and sticking of strain gauge and design of metrical circuit.
冲击式谷物流量传感器是常用的测产装置。 流量传感器的性能主要取决于敏感梁的设计、应变片的选取粘贴以及测量电路的设计。
Process and facility selection of two stage closed circuit grinding and its application in phosphoric acid facility matching wet-process grinding system were introduced.
介绍了两段闭路磨矿工艺技术路线、设备选择以及在云峰分公司磷酸装置配套湿法磨矿系统上的应用效果。
A kind of circuit for automatic range selection of voltmeters is introduced and designed.
提出并设计了一种适用于电压表的量程自动转换电路。
This paper states several problems in water pump rising pipe design and puts forward precautions from the aspects of circuit arrangement and pipe material selection.
论述了水泵出水管路设计的几个问题，并在线路布置、管材选择等方面提出了注意事项。
In this paper, selection of blasting cut height and parameters, pre-treatment, design of priming circuit and safety precaution measures were introduced.
文中介绍了爆高和爆破参数的选择、预处理、起爆破网路设计和安全防护措施。
The project also carried out system design, including: the overall cooling control system design, hardware design and selection, circuit design.
本课题还进行了系统设计，主要包括：冷却控制系统整体设计、硬件设计及选型、电路设计。
The specific realization of each function module of the circuit was introduced with detailed analysis of the device type selection and its parameter determination.
介绍了采集电路的各个功能模块具体实现方案，对各器件的选型和参数确定做出详细的分析。
This paper is involved in the analysis of oscillation starting condition, output voltage amplitude adjustment, and frequency selection network composition of sinusoidal coave oscillation circuit.
分析了用运算放大器组成正弦波振荡电路的起振条件和输出电压幅值的调节及选频网络的构成。
Taking the three parts as the core, parts selection, circuit design and PCB production are completed.
本文以这三部分为核心进行了器件选型和电路设计并制作了PC B板。
This article explains power selection, adjustment and protection of control transformer and calculation method on secondary short circuit current.
阐述了控制变压器功率选择、校验、保护及二次短路电流的计算方法。
This article explains power selection, adjustment and protection of control transformer and calculation method on secondary short circuit current.
阐述了控制变压器功率选择、校验、保护及二次短路电流的计算方法。
应用推荐