High stiffness and repeatability characterize the ball screw drive.
高硬度和可重复性特点滚珠丝杠驱动器。
A drive motor placed in the longitudinal axis of the machine takes care of the screw drive.
螺杆由安装在机器轴向的马达驱动。
Schaeffler's MKUVS32-KGT compact linear actuator with ball screw drive solves these issues.
舍弗勒的MKUVS32 - KGT紧线性驱动器与滚珠丝杠驱动器解决了这些问题。
The SDU Series ball screw drive provides precise positioning and high load carrying capability.
该组系列滚珠丝杆驱动器提供精确定位和高承载能力。
The use of Handcart screw drive, the car entered the location of the trial after the doors closed and out of operation.
该产品手车全部采用丝杆传动,小车进入试验位置后关上柜门操作进出。
Abstract: the system USES a gear reducer, drives the lead screw drive, And nut straight through mobile workbench movement.
摘要:本系统采用一级齿轮减速,带动丝杠传动,通过螺母的直线移动带动工作台运动。
The result shown that: the guide screw drive has the advantages of low cost, high efficiency, com-pact structure and easy operation.
结果表明:丝杠传动具有成本低、效率高、结构简单、加工方便等优点。
An optimization method has been used in the design of teh ball screw drive. The objective function and constraint conditions are discussed.
用优化设计方法进行滚珠丝杠传动的设计,对设计的目标函数及约束条件进行了分析讨论。
The drive system is a high precision ball screw drive (maximum spindle speed 3,000rpm) and the user can specify pitch values of 2, 4, 10 or 20mm.
该驱动系统是一种高精度的滚珠丝杠驱动器(最高转速3000rpm ) ,用户可以指定间距值2 ,4 ,10或20毫米。
Working principle of speed change box sliding table is the longitudinal motion on the bed. Because the lead screw drive, couple with the function of gear box.
变速箱式滑台工作原理是滑板在床身上做纵向运动,因其丝杠传动,再加上变速箱的作用。
Grinding head on, sliding imports of dual-use system linear guide, two-ball screw drive, to achieve the smooth running speed to eliminate mobile space (displacement).
磨头座、滑动系统采用进口的双直线导轨、双滚珠丝杆传动,以达到运行速度平稳、消除移动间隙(位移)。
So, NIRVANA can say is the only true sense have speed of variable frequency drive screw air compressor.
所以,NIRVANA可以说是目前惟一真正意义上拥有调速变频驱动的螺杆空压机。
Low torque required to drive the load due to high efficiency ball screw.
低扭矩所需的驱动负载,由于高效率的滚珠丝杠。
In the mechanical design of the system, screw pair drive is applied to achieve the up-and-down movement.
在该系统的机械设计,双螺杆驱动器是用于实现向上和向下运动。
In order to meet the screw air compressor operation of the energy saving, there must be an efficient change speed motor drive.
为了满足螺杆空压机运行中的节能,必须有一种高效率变转速的驱动电机。
The micro motion drive unit is a highly refined screw-driven hydraulic jack.
微形传动装置是一个极精制的螺杆用液压作动筒。
The inefficient single wave harmonic drive caused by interference of tooth profiles has not been solved by exact theoretical analvsis; Screw is used in the paper as mathematical tool.
齿廓干涉引起单波谐波传动失效的问题迄今没有精确的理论分析方法。
Because planet differential gearing has some weakness someone suggests we can use hydraulic transmission to drive the horizontal screw decanter.
采用行星传动差速器的卧螺离心机存在很多不足,提出了用液压方式驱动卧螺离心机的方法。
Rotate frequency conversion regulating speed, drive servo motor or stepper motor, drive ball screw.
旋转变频调速,驱动伺服电机或步进电机,传动滚珠丝杆。猈。
The mechanism of drive and numeric control of various kind of screw presses are studied.
对不同种类的螺旋压力机的传动及其数控机理进行了比较研究。
The compressed air rotates the driver bit (4) together with the drive gear (13) and the screw is screwed into the material to be struck.
通过压缩空气使上述螺丝批头 (4)与驱动齿轮(13)一起旋转,由此上述打入螺钉被打入到被打入 件中。
Used part of the rotor pump is a simple spur gear drive motor, electric screw fixation using pin.
部分转子泵采用的是简单的直齿轮驱动电机,电机采用地脚螺钉固定。
The drive nut is operatively connected to the pedal arm to axially move the pedal arm along the drive screw with the drive nut as the drive screw rotates.
该驱动器是手术螺母连接到踏板臂轴向踏板沿着作为驱动螺杆旋转驱动器螺丝螺母手臂。
The shading network connected to thread USES an expression to drive the displacement threading and a ramp to prevent the threading from appearing on the head and the tip of the screw.
这个材质网络用一个表达式连接到螺纹去驱动螺纹的置换和一个渐变,去防止螺纹在顶端出现和在螺纹尖部出现。
The pulverizing screw includes a rotating shaft which is installed in the main body so as to be rotatable, and at least one drive blade which extends from the rotating shaft.
粉碎螺杆包括旋转轴和至少一个驱动刀片,旋转轴被安装在主体上从而可旋转,至少一个驱动刀片从该旋转轴延伸。
The drive system consists of AC servomotor, ball screw and rectilinear orbit etc.
本传动系统由交流伺服电机、滚珠丝杠及直线导轨等组成。
Against the status, PM brushless torque motor to drive screw pump directly was adopted by the paper, and the correlative problem was studied.
针对这种情况,本文采用永磁无刷力矩电机直接驱动螺杆泵,并对其相关问题进行了研究。
High torque and excellent performance of hydraulic motor can drive screw directly and shorten plasticizing time so that saves energy.
采用高扭力、效率佳之油压马达,直接驱动螺杆,可缩短塑化时间节省能源。
High torque and excellent performance of hydraulic motor can drive screw directly and shorten plasticizing time so that saves energy.
采用高扭力、效率佳之油压马达,直接驱动螺杆,可缩短塑化时间节省能源。
应用推荐