The deformation of slope caused by change of ground water level was investigated by adopting a fully coupled procedure and the state-dependent dilatant sand model.
本文采用完全耦合有效应力分析程序和与状态相关的剪胀性砂土模型模拟斜坡因地下水位变化而发生的变形。
In this paper, we utilize sand model test as the basis to study the physical and mechanical processes of unsteady seepage in homogeneous earth DAMS on impervious foundation.
本文以砂模型试验为基础,探讨了不透水地基均质土坝非稳定渗流的物理力学过程。
By the experiment of sand model, an investigation of silt content, rank of silt grain and silt deposition rate under different conditions of water and silt have been obtained.
通过泥沙模型试验研究,分析不同入库水沙条件下进入取水口内水流的含沙量和颗粒级配,水库对泥沙的沉降率。
The computed rock compressive strength with the established regression model can support exact compressive strength for the establishing of sand prediction model for oil well.
利用该回归模型进行抗压强度的计算,可以为建立油井出砂的理论预测模式提供较为准确的岩石抗压强度数据。
The design methods include how to select bed load and bed material within the suspended load and how to determine the feed of the model sand and the time of the experiment.
模型设计方法主要包括:如何合理选择模型河床质和床沙质,如何确定进口断面加沙量和放水时间等。
Therefore, the application of high-resolution thin-interbed inversion based on the model in sand body description and reservoir prediction has been studied.
为此,在该区开展了基于模型的高分辨率薄互层反演技术进行砂体描述和储层预测的研究。
Developed wellbore transient flow model and friction calculating method for the sand mixed fluids effected by propant.
建立了井筒不稳定流动模型,提出了支撑剂影响下的混砂液摩阻计算方法。
The selection of model sand is the key problem in the design of a mobile bed model test.
对于研究泥沙问题的动床模型试验,模型沙的选择是模型设计的关键。
Two-fluid large eddy turbulence model is applied to research the movement of the sand clouds in quiescent water.
本文采用双流体大涡紊流模型对静水中泥沙云团下落过程进行了研究。
Taking this sand body model as facies-controlling conditions, a reservoir property model was proposed.
然后以此砂体模型为相控制条件,建立储层物性参数模型。
This paper describes a method of simulation of a fractured sand reservoir with black oil model.
本文介绍了用黑油模型研究裂缝型砂岩油藏的方法。
The shape of model sand particle play an important role in submarine rest angle, starting speed, bulk specific weight and some other physical characters.
颗粒形貌对模型沙的水下休止角,起动流速、堆积密度等性能有显著影响。
On the basis of test research, unloading arc calculating model and arc beam mechanical model are set up, thick sand stratum's rupture law is exposed.
在实验研究的基础上,建立了“卸荷拱”计算模型及“拱梁”力学模型,初步分析了厚沙土层的破坏机理。
By the experiment on quartz sand filter, the effect and mechanism of phenol removal were studied. A related mathematical model was presented and demonstrated by a project case.
结合石英砂滤床模型试验,研究了石英砂滤床的除酚效果与机理,提出了相关数学模型,并通过工程实例进行了验证。
The result predicted with this model can be used to determine the sand producing condition in the newly developed layers and current producing layers.
该模型预测的结果可用于判断新井投产出砂和目前生产层位出砂的状况。
When fishing the string fish in sand producer, string milling length should be optimized and a downhole string dynamic analysis model is established to calculate the length.
出砂井落鱼管柱打捞需要对管柱的套铣长度进行选择,针对这一问题建立了井下管柱受力分析计算模型。
In this paper, the application of the sand cone model in supply chains was discussed and new research avenues were opened in the research of the compositeness of supply chain.
通过将沙堆模型应用于供应链,为供应链竞争力问题提出新的分析思路。
Based on the conventional triaxial experiments for sand, the elastoplastic constitutive model of sand is built up through the numerical method of modeling the constitutive law for rock and soil.
基于砂土的常规三轴试验,利用岩土本构关系的数值建模方法,建立砂土的弹塑性本构模型。
In this raper, a model of continuous wall inserting in sand with a thin layer of grease as a slide surface has been loaded laterally in laboratory.
本文在模型实验基础上,采用有限元方法,对砂、软弱夹层和连续墙三种材料的组合结构进行了非线性分析。
The predicting formula of the drawbar pull of driven wheels running on the sand is obtained by model test.
通过模拟试验,得出了驱动轮在砂地上行驶时的挂钩牵引力预测公式。
Stress distribution and moving characteristics are obtained through simulation when the wheel contacts with sand. The validity of simulation model is verified by experiments.
通过仿真得到车轮与沙土颗粒接触时的应力分布关系,以及运动特性关系,并通过实验验证仿真模型的正确性。
The movement of light oil(gasoline and kerosene)in subsurface homogeneous water saturated zone and water unsaturated zone were simulated in a two-dimensional sand trough model.
在二维砂槽模型中模拟了轻质油在均匀多孔介质地下水非饱和区和饱和区中的运移过程。
Load tests of lime sand piles and model tests of cement lime sand piles are carried out in situ and indoors.
对灰砂桩复合地基和掺入水泥的灰砂桩复合地基分别作了现场荷载试验和室内模型试验。
A new method to determine the size distribution of model sand is proposed based on Sha Yuqing's formula, which could partly avoid the shortcoming of previous methods.
作者主要阐述悬移质模型沙级配的模拟方法,并提出利用沙玉清公式计算、设计模型沙级配的另一种方法,以尽可能严格满足模型相似条件、克服老方法的不足和缺陷。
Based on oil well IPR curve and the special consideration of the additional skin factors caused by sand control measures, a new productivity prediction model for sand control Wells is developed.
以防砂前油井流入动态(IPR)曲线为基础,考虑各种防砂措施在井底附近造成的附加阻力表皮,建立了一套基于IPR曲线的防砂井产能预测方法。
Results the model of the fluvial facies sand-body sediment the extensive connecting body for braid river sang-body and the half connecting body for meandering river sand-body.
结果建立了辫状河砂体“泛连通体”、曲流河砂体“半连通体”的储层砂体沉积模式。
After the first water addition, we adopt AR model to predict the stable value of sand compactibility to shorten the time mixing the sand.
第一次加水后,对型砂紧实率稳定值采用AR模型进行预测,以缩短型砂混制时间。
The sand box model is a reduced scale representation of the natural porous medium domain.
砂槽模型是将天然的多孔介质区域按比例缩小的模型。
This paper analyzes the factors affecting the controlling precision of sand compactibility system and sets up the dynamic model of regression coefficient between sand compactibility and water content.
分析了影响型砂紧实率控制精度的因素,建立了型砂紧实率-水分回归系数的动态模型。
This paper introduces the principle and structure of Model SSKJ molding sand moisture tester designed and made of authors 'own, and its application in sand preparation line.
介绍了自行设计和制造的SSKJ型砂水分自动控制仪的工作原理、结构以及在间歇式混砂机砂处理线上的应用。
应用推荐