In the case of our sample connected health system, Data Capture and Delivery serves as a collection and control point for the connected but less-intelligent devices.
对于我们的样例连接健康系统，DataCaptureandDelivery充当了一个收集和控制点，面向那些已经进行了连接但不太智能的设备。
The design of the single chip system, sample box thermostat circuit, sample position detecting circuit and step motor control circuit are discussed.
着重讨论了单片机系统、样品箱恒温电路、样品位置检测电路和步进电机控制电路的设计。
The study is of opinion that the uncertainty contribution of RON measurement system is, by using this technique, consisted of quality control (QC) sample and in-statistical RON results.
研究表明，采用该技术来评估RON检测系统的不确定度，其贡献量分别是由质量控制（QC）样品和受控RON测试结果两部分合成。
The high-speed system offers unparalleled sample imaging and position control.
高速系统提供了卓越的试样图象和位置控制。
By using this technique, the dynamic uncertainty contribution of an analytical measurement system comprises of uncertainties of quality control (QC) sample measurements and linear fitting.
本研究认为，采用该技术来进行分析测量系统的动态不确定度评估，其贡献量可由质控样品(QC)和线性拟合两部分合成。
At last, the control system including the drive and protect circuits of the IPM and the current sample circuits and so on are designed.
最后设计调试了永磁电机直接转矩控制系统，包括IPM驱动和保护电路，电流电压采样电路以及转速采样电路等。
A high precision control system of worktable is the important part in modern advanced microscopic system, its re-orientation accuracy affects the sample observation quality of microscope directly.
高精度工作台控制系统是现代自动显微系统的重要组成部分，其精度直接影响显微镜对样品的检测质量。
Based on switch mode sensor of relative wind direction, we present a kind of tracing wind fuzzy control system with constant sample cycle and variable control cycle.
基于开关式相对风向传感器，提出一种固定周期采样、变周期控制的风向随动模糊控制系统。
An engineering sample with intelligent data collection control series modules to support field bus and remote control of railway signal system is introduced.
介绍了一个支持现场总线的智能数据采集控制系列模块成功运用于铁路信号系统的远程控制的工程实例。
And the paper recommends the necessity of measuring sample deformation directly under feedback control system in the critical ice mechanical properties tests.
指出了在严格的冰力学实验中直接测量试样表面变形并在试验机上对加载进行闭环反馈控制的必要性。
Computer controlling system is a discrete system and calculated its control valve based on input valve at sample time.
计算机控制是一种采样离散控制，它是根据采样时刻的输入量来计算控制量。
Tip sample distance control system is the key part of scanning near field infrared microscopy.
针尖样品的距离控制系统是扫描近场红外显微镜的重要组成部分。
A high precision scanning and control system is an important part in modern scanning microsystem, which affects the quality of sample imaging for scanning microscope.
高精度扫描控制系统是现代扫描显微系统的重要组成部分，它影响着扫描显微镜对样品的扫描成像质量。
We promote the precision of control system by using Kalman filter to process the sample data and intensify the dynamic tracking properties by adding feed forward.
对采样数据进行卡尔曼滤波以提高控制的精度并且加入前馈增强系统的动态跟踪性能。
The sample handling system should control the sample pressure and remove solid and liquids to ensure the sample presented to the gas chromatograph is clean and dry.
样品处理系统应控制样品压力和去除固体和液体，以确保呈现给气相色谱仪样品是清洁和干燥。
On the problem of supports adjusting in the regular fracture realization of geometrically asymmetric sample, this dissertation proposes a kind of stepping motor control system tentatively.
对于几何非对称试件规则断裂实现中的支座调整问题，本文初步提出了一种步进电机控制系统。
CPLD is used as image sampling control unit and DSP as the system core, and pretreatment circuit is designed to be multifunctional, all these help to sample different wavelength image signals.
该平台采用CPLD作为图像数据的采集控制单元，DSP作为核心处理单元。同时对视频信号的预处理电路进行了通用化设计，能够有效保证系统对不同波段的图像信号进行采集和处理。
Special importance were attached to the design and calculation of deposition chamber, vacuum system, sample system, sputtering cathode and control system.
作为重点，对真空室、真空系统、工件架、磁控溅射靶、控制系统等进行了相应的设计分析和计算。
The principle and control method was introduced, and a design sample of hardware and software applied on variable frequency system was given in this paper.
在介绍其原理与控制方法的同时，并给出了在变频调速中应用的硬、软件设计实例。
Take the designed sample BSRM of 12/8 structure as control object, hardware of high-speed digital control system is preliminary designed, including power converter and control system.
以设计的12/8结构样机为控制对象，对磁悬浮开关磁阻电机高速数字 控制系统进行了硬件原理设计，包括功率变换器和 控制系统设计。
Take the designed sample BSRM of 12/8 structure as control object, hardware of high-speed digital control system is preliminary designed, including power converter and control system.
以设计的12/8结构样机为控制对象，对磁悬浮开关磁阻电机高速数字 控制系统进行了硬件原理设计，包括功率变换器和 控制系统设计。
应用推荐