The P-S-N curves are made by statistic treatment of the test data.
用概率统计法对试验数据进行了处理，得到了P - S - N曲线。
The next one is Sensing - Intuiting (S-N), with about 75 % of the population sensing.
第二项是感觉——直觉（S-N），大约有75％的测验者是感觉派的。
Furthermore, the P-S-N curves of D type V belt are plotted and the distribution of limit stress are deduced.
还根据所得寿命分布作出了D型V带的P-S-N曲线，并据此推断出极限应力的分布规律可以用威布尔分布或正态分布描述。
The stress field analysis showed that the cleavages formed under horizontal, S-N trending compressive stress.
应力场的分析表明，劈理构造由近南北向的地壳水平挤压应力作用形成。
Experimental results indicated that the effect of shot-peening and ion implantation on the S-N curves is related to temperature.
结果表明，喷丸和离子注入对材料疲劳s - N曲线的影响与实验温度有关。
The S-N curves for internal fracture mode are not affected by surface conditions, which is an inherent characteristic of the material.
内部破坏模式的S - N曲线不受表面条件的影响，是材料固有的特性。
Seven methods for measuring P-S-N curves are presented and these methods are analyzed and compared using the experiment data of five materials.
本文介绍了七种测定p - S - N曲线的方法。并且用五种材料的实验数据对上述测定方法作了分析比较。
The early migration has been charged from Shengbei fault, which the late migration has been charged from the northern part of the S-N trending fault.
早期油气运移的充注点位于胜北断层，晚期油气运移的充注点位于南北向断层北部。
On the basis of test count, the complete C-R-S-N curve is worked out according to the principle of statistics. so as to provide basic data for gear design.
在试验数据的基础上，根据统计学原理，拟合出完整的C - R - S - N曲线，并获得各种可靠度下的弯曲疲劳曲线，从而为国产材料齿轮设计提供了必要的基础数据。
The effective flaw model is developed to describe the S-N curves of composite materials. The two fitted parameters in the model have certain physical meaning.
本文建立了复合材料疲劳寿命曲线的“有效缺陷模型”，阐明了模型中两个参数的物理意义。
On the basis of testing process at the fatigue strength, and combining -3s-s-n curve, we clearly explain reliability meaning about fatigue strength in infinite life.
根据疲劳强度试验过程，结合-3s - S - N曲线明确解释了无限寿命的疲劳强度可靠度的含义。
However, the normalized S-N curves, by the corresponding ultimate strength at specific temperature, become mixed together. They are separate at least over 105 cycles.
然而由相对应温度之极限强度所无因次化的应力-振次曲线混在一起，而它们在高于105振次后会分开。
The suddenly changeover multicriterion assessment method is used to evaluate several scenarios of water source engineering in Mid-line of S-N water diversion project.
应用突变多准则评价法对南水北调中线水源工程项目的多方案比选作出评价决策。
If the failure is defined as the final fracture of a component, then both S-N curves and crack growth rate curves reflect the fundamental material behavior under fatigue loading.
如果都把一个构件的最终断裂作为疲劳破坏的定义，则S - N曲线和裂纹扩展率曲线均是反映金属在疲劳载荷作用下的基本材料特性。
The test analysis shows that the fitted slope of test data to nominal stress and hot spot stress S-N curves for aluminum 5083 welded joint with longitudinal fillet welded gusset is 5.
试验分析说明铝合金5083纵向角接板焊接接头名义应力和热点应力疲劳s - N曲线试验数据拟合斜率为5。
According to the given experimental constant amplitude fatigue life group data, the three parameter exponential function equation can be adopted to describe the constant fatigue P-S-N curve.
对于给定的等幅疲劳成组试验数据，利用三参数幂函数方程来描述P - S - N等幅曲线。
The major big rift and two groups of the minor rifts approximately pointing to S-N in the area are the main pathway and the main tectonic crack of heat controller for the hydrothermal activity.
区内近S—N向的主要大断裂和两组次一级的断裂是水热活动的主要通道和主要控热构造裂隙。
The random stress of torsion rod spring may be calculated after road surface, vehicle speed arid constructional parameters are given, and service life may be estimated according to P-S-N curve.
在给走路面、车速、结构参数后，可计算出扭杆的随机应力，并根据P - S - N曲线估计出扭杆的寿命。
This method converted the S-N curve of material into the S-N curve of the construction member so that it made the computation more closely to the practical service life of the construction member.
该方法将材料的S - N曲线转化为零构件的S - N曲线，使之计算结果更接近于实际零构件的使用寿命。
Based on an experimental study of multiple repairing welded joints on high strength offshore structure steel, the R-S-N curves and life estimation equations under Weibull distribution are presented.
对海洋平台用高强度钢焊接接头多次补焊的疲劳性能进行试验研究，给出采用威布尔分布下的寿命估算式及R—S—N曲线。
The letters N, S, E and W stand for north, south, east and west.
字母N、S、E和W分别代表北、南、东和西。
Under the ship, he printed in big red letters: C-O-N-G-R-A-T-U-L-A-T-I-O-N-S!
在船下面，他用红色大字写着：C-O-N-G-R-A-T-U-L-A-T-I-O-N-S！
The ratio of signal to noise (S/N) is greatly improved through the phase sensitivity detection.
通过相位灵敏度检测，大大提高了信噪比。
One detection design block diagram and algorithms for low S/N DS/SS signal are presented in this paper.
本文对低信噪比直接序列扩频（DS／SS）信号的检测提出了设计方案和算法。
It is stressed that the relationship between prestack processing S/N and resolution is important.
强调了叠前处理信噪比与分辨率关系的重要性。
The experimental results showed that interstitial elements such as c, s, n, o and other impurity elements have great influences on ductility and toughness of maraging steels.
研究结果表明，间隙元素C、S、N、O与其它杂质元素对马氏体时效钢的韧性与塑性的影响很大。
The resulted data can meet the requirements of fine structure interpretation and lithologic exploration in terms of resolution and S/N in this area.
应用效果表明，所得资料的分辨率和信噪比均满足该区当前构造精细解释和岩性勘探的要求。
Record all the action and P/N and S/N of the removed/installed component as well as ATA chapter in the flight log book after any corrective maintenance action has been taken.
在采取任何纠正维修措施后，要将所作的所有工作以及拆下/安装部件的件号、序号，以及涉及到的ATA章节号，都记录在飞行记录本上。
Record all the action and P/N and S/N of the removed/installed component as well as ATA chapter in the flight log book after any corrective maintenance action has been taken.
在采取任何纠正维修措施后，要将所作的所有工作以及拆下/安装部件的件号、序号，以及涉及到的ATA章节号，都记录在飞行记录本上。
应用推荐