With rubber core wire mesh can achieve environment, waterproof and sealed with corrosion resistant and so on role.
带橡胶芯的金属丝网可以达到环境密封，具有防水防烟防腐蚀等等作用。
The structure consists of four parts : shell, whole seal assembly, hanger assembly, self seal rubber core assembly.
其结构由壳体、全封总成、悬挂器总成、自封胶芯总成四部分构成。
Shock eraser insert: thermoplastic rubber core inside a thermoplastic elastomer butt cap is pressure fit into the shaft to reduce frame shock and vibration.
减震插片：拍柄内置热塑性橡胶内核同热塑性弹性体，有效减少球拍震动。
Close the annular blowout preventer as the well pressure is relatively low and force oil pipes and couplings to pass through rubber core of the annular blowout preventer.
井压较低时，关闭环型防喷器，使油管和接箍强行通过环型防喷器胶芯。
The wire with rubber core conductive seal can through the conductive adhesive and article (metal wire point of contact to penetrate film) fixed in the groove or in aperture.
带橡胶芯的金属丝导电密封条能够通过导电胶粘结(金属丝的接触点能够穿透薄膜)固定在沟槽或缝隙内。
The material choice is simple: the shoe is a laminate with Carbon fibre for the core which gives the shoe its spring and strength, leather on the foot side and rubber on the walking wearing side.
这种材料的选择很简单：鞋材以一层碳纤维为主，碳纤维能提供鞋子必须的支撑强度，也很有弹性，接触脚的一面贴着皮革，鞋底的一面贴着橡胶。
But at its core is a power strip — called the Powertrack — with a single trench less than two centimeters wide, concealed by two rubber flaps.
但其核心是Powertrack电源接线板，它表面是一个不到两厘米宽的沟槽，外面用两片胶皮封闭。
The experimental results show that all the aluminum honeycomb core, metal rubber annulus and magnetic damping of eddy current can be used as damping materials or modes of the lunar lander.
试验结果表明铝蜂窝圆芯、金属橡胶圆环及涡流磁阻尼都可以用作月球着陆器的阻尼材料或阻尼方式使用。
Rubber hose is core parts of hose pumps. The deformation characteristics determine the life of hose pumps.
橡胶软管是软管泵的核心部件，其变形特性直接关系到软管泵的性能和使用寿命。
Power cord using silicon rubber prevent hardening of the three core design, long service life.
电源线采用矽胶线防硬化三芯线设计，使用寿命超长。
Conductive wire core outside the use of heat-resistant polyester film insulation tape wrapped around, the outermost layer made of rubber insulation and sheath as protective layer.
导电线芯外面采用耐热聚酯薄膜绝缘带绕包，最外层用橡皮制成的绝缘兼护套做为保护层。
It's one of best methods to use polyurethane rubber rather than usual cavity or core in steel die.
以聚氨酯橡胶代替通常钢模中的凹模或凸模是比较有效的方法之一。
Through the loading test of different displacement amplitude, various loading frequency and circulation, working properties of lead-core rubber damper were investigated.
通过不同位移幅值、不同频率和不同循环的加载试验，研究了铅芯橡胶阻尼器的工作性能。
The rubber tube was expansed after inflated, then closed. The soft core that could be favourable to mandrel stripping was used to rubber special tube.
用一纯橡胶管充气后使其膨胀然后将其封闭，用作橡胶异型管生产中使用的软芯，能够有利于脱芯。
The core mold made of thermal expansion silicon rubber is used with steel mold to mold CF composite products with good result.
以硅橡胶材料制作的芯模与钢模组合使用制备碳纤维复合材料制件，应用效果较好。
The core construction of EHC's TufFlex rubber handrail sets the industry standard for dimensional stability and cost-saving, trouble-free operation on the most punishing drive systems.
依合斯至强型扶手带的核心构造因其尺寸稳定，成本节约，在最残酷的驱动系统上无障碍运行成为行业标准。
Conductive core line outside a thermally insulated with polyester film around the package, with the outer layer made of rubber insulation and jacket as a protective layer.
导电线芯外面采用耐热聚酯薄膜绝缘带绕包，最外层用橡皮制成的绝缘兼护套做为保护层。
Conductive line outside the core using heat-resistant polyester film with insulation around the package, the outermost layer of rubber insulation and sheath made of as a protective coating.
导电线芯外面采用耐热聚酯薄膜绝缘带绕包，最外层用橡皮制成的绝缘兼护套做为保护层。
The polystyrene plastic rubber wire core is in a strip shape pressed by a wasted foam plastic hot melt mold through hot melting, wherein the pigment is an environment-friendly waterborne coating.
所述的聚苯乙烯塑胶线材芯为废弃泡沫塑料热熔模压成形条。所述的颜料为环保水性涂料。
Using the cold core and floating mold to solve the problem that the precision of auto rubber and plastic products is so hard to guaranteed.
采取冷芯浮模加工解决汽车橡塑零部件精度难以保证的问题。
This product is the rubber for inner core of woven wire mesh and rubber together in one kind of product.
该产品是以橡胶为内芯，将编织的金属丝网与橡胶结合在一起的一种产品。
New methods for the toughening of epoxy resin by rubber elastomers, thermoplastic resins, rigid particles and core-shell polymer particles are introduced.
介绍了环氧树脂增韧改性的新方法，即用橡胶弹性体、热塑性树脂、刚性粒子和核壳型结构聚合物来增韧环氧树脂。
The invention consists of an outer tube, a rubber stopper, a core bar and a push bar.
本发明由外筒、胶塞、芯杆和推杆组成。
The invention consists of an outer tube, a rubber stopper, a core bar and a push bar.
本发明由外筒、胶塞、芯杆和推杆组成。
应用推荐