An investigation of rolling pressure on metallic uranium rod was made.
本文对金属铀棒材轧制压力进行了研究。
The distribution of the rolling pressure on H-beam is a very important problem.
h型钢的轧制压力分布是研究人员非常关心的问题。
Therefore, it is necessary to establish a model of rolling pressure distribution in the casting zone.
因此建立该区的轧制压力分布模型是必须的。
According to different plate width and rolling condition, process parameter such as rolling pressure are measured.
本文根据现场不同板宽、不同轧制条件情况，实测了轧制压力等工艺参数。
After rolled in changed groove, wall thickness uniformity decreases, and rolling pressure and electric current increase.
孔型修改后，钢管壁厚精度降低，力能参数有所升高。
The rolling pressure on a ld cold tube mill is analyzed and the calculating method of technical parameters such as rolling pressure is derived.
分析了在ld型冷轧管机上轧管时的轧制压力，导出了轧制压力等力参数的计算方法。
A combined analytic and numerical method for predicting the temperature, deformation and rolling pressure for plate hot rolling was established.
采用微分方程的解析解法和数值解法相结合的思路建立了中厚板热轧过程温度场、变形场和轧制力的综合求解模型。
An improperly designed hot roller can cause fabric edge in excess of rolling pressure due to the increased roller diameter near the journal ends.
不适当的热轧辊设计会导致织物边缘过度轧压，这是因为热轧辊端部附近直径增大引起的。
The designed parameters of mechanical capabilities of the roll caster should be raised when rolling pressure increase with roller diameter increase.
随着铸轧辊径增大，轧制压力增大，因此铸轧机力能设计参数也要相应增大。
The behavior of uranium metal in rolling mills was considered as a viscous flow. Then the differential equation for rolling pressure was established.
把轧制中的金属运动看作粘性流动，建立了轧制压力微分方程；
All the data used are taken on-the-spot, and the B-P learning algorithm is adopted, then a new way to establish the model of rolling pressure is explored.
所用数据全部取自现场，采用B - P学习算法，为轧制压力建模探索了一种新的途径。
In the process of rolling, the movement of rolling sets decide the rolling pressure, the deformation of the spindly shaft and consequently the rolling quality.
在滚压加工工艺中，滚压套的压下量大小决定了滚压力的大小并决定了细长轴表面发生弹塑性变形的状况，从而决定了细长轴的加工质量。
In the calculation, both material and geometric nonlinearities are considered. The rolling pressure, friction, front tension and back tension distributions are given.
计算中同时考虑了几何和材料双重非线性的影响，给出了轧制压力、摩擦力和前后张力的分布。
Rolling pressure of metal processing, said simply, rolling plate as pressure noodles, after the repeated compression and Ganmian Zhang advance, the more of the rolling thin.
轧钢属于金属压力加工，说简单点，轧钢板就像压面条，经过擀面杖的多次挤压与推进，面就越擀越薄。
The rolling pressure on high speed untwist wire rod mill was measured firstly and succeeded internationally for optimizing technology, pass design, and management of the plant.
首次对高速无扭线材轧机粗轧机组压力进行测试并取得成功，为优化工艺规程、优化孔型设计及设备全过程的经济管理与改进提供了可靠的依据。
The rolling pressure is exerted gradationally whereas the rolling process is divided into three steps, namely, rolling orientation, rolling reinforcement and rolling smoothing;
滚压力分级施压，滚压分为定位滚压、强化滚压、光整滚压三过程；
Stable, reliable and easily-controlled, this system has achieved comprehensive economical benefits to reduce rolling pressure, ensure rolling quality and raise machine production.
本系统稳定、可靠，操作便利，取得了降低轧制压力、确保轧制质量、提高产量的综合经济效益。
In the cold rolling process, the cold roll will sustain a large rolling pressure, so that the surface morphology of the cold roll could be transferred to the cold-rolled metal sheets.
在冷轧加工过程中冷轧辊需要承受较大的轧制压力，最终将轧辊的表面形貌传递给冷轧薄板。
The temperature gradient is very great in the rolling zone under the ultra thin high speed roll casting condition, and the rolling pressure is strongly coupled function of the temperature.
超薄快速铸轧条件下轧制区内温度梯度很大，其轧制压力是温度的强耦合函数。
How to apply CBR method to establishing plate rolling regulations was described, and a new method using BP nerve net algorithm to predict rolling pressure and to regulate case was put forward.
笔者论述了如何将此方法应用于中厚板轧制过程的规程制定，并提出了一种将BP神经网络算法用于预报轧制力，进行范例调整的方法。
Not only elastic deformation of the roller is considered, but also elastic deformation of the rolled piece is considered, a set of new rolling pressure model about the thin strip level is established.
考虑到轧辊的弹性变形以及轧件的弹性变形，建立了一套新的薄带平整轧制时的轧制压力模型。
The rolling mechanism was studied in this paper. The rolling process and the design of pass of rolling mill were researched, meanwhile, the rolling pressure of Y-type rolling mill was also calculated.
本文从研究轧制原理入手，对轧制工艺及孔型设计进行了深入研究，给出了Y型轧机轧制压力计算。
By the second quarter of 2010, legislators will be rolling out new measures to pressure China on exchange rates and trade surpluses.
在2010年下半年前，美国国会将推出在汇率和贸易顺差方面给中国施压的新举措。
The roll separating force, rolling torque and contact pressure along the surface of the rolls are also evaluated by means of the finite element method.
轧制分离力、轧制力矩以及沿轧辊表面的接触压力也通过有限元法进行评估。
Worry about it out of trouble, while in time "water Margin" and to critique, while rolling a large Bei Bei irrigation water, trying to pressure down the heat just budding.
担心它又出来闹事，一边赶《水浒传》的稿件时，一边咕噜咕噜地灌了一大杯杯水，试图把刚萌芽的热气压下来。
Rolling recovery and high temperature and high pressure swelling methods was used in the study of inhibitive property.
抑制性研究采用滚动回收率法和高温高压膨胀法。
Soit is very important to compute the scroll pressure accurately for the hot striptandem rolling.
因此，准确地计算卷筒的径向压力对于带钢热连轧是非常重要的。
Soit is very important to compute the scroll pressure accurately for the hot striptandem rolling.
因此，准确地计算卷筒的径向压力对于带钢热连轧是非常重要的。
应用推荐