The first was a '70 Monte Carlo, whose 350 engine Nick had beefed up with a high-lift roller cam and racing pistons.
最开始是一辆七十年代的蒙特卡洛轿车。尼克用高扬程滚子凸轮和赛车级活塞把它的350发动机做了改装。
Taper support rib: rib conical taper at the circumferential rib support, in between the CAM groove, Roller CAM with the circumference of linear contact.
锥形肋位于锥度支撑肋的圆周上，在凸轮凹槽之间，与凸轮滚子的圆周线性接触。
Taper support Rib : Rib conical taper at the circumferential rib support, in between the cam groove, Roller Cam with the circumference of linear contact.
锥度支撑肋：锥形肋位于锥度支撑肋的圆周上，在凸轮凹槽之间，与凸轮滚子的圆周线性接触。
This Paper introduces anew mechanism of the differential CAM, in which the work between cylindrical CAM and relating roller is carried out by the differential principle.
本文介绍了一种新型的凸轮机构，其中的圆柱凸轮与相应滚子之间按照差动原理进行工作。
An analytical design method of disk CAM mechanism with oscillating roller follower is introduced.
介绍了摆动滚子从动件盘形凸轮机构设计的解析法。
In this paper, the calculating method for the contact stress of plate CAM mechanism with translating roller moving follower is presented, and some examples are given.
本文详细分析了对心滚子移动从动件盘形凸轮机构接触应力的计算方法，并给出具体计算例题。
With cylindrical coordination, this paper establishes the contour surface equations and pressure Angle formula of the conical grooved CAM with translating conical roller follower.
借助柱面坐标，建立了圆锥滚子直动从动件圆锥槽凸轮的廓面方程和压力角公式。
The case of a plate CAM with an oscillating roller follower is taken as an example. This method is also applicable to other types of plate CAM system.
文中以滚子摆动从动件平面凸轮为例，其解题方法也适用于其它类型平面凸轮机构。
This paper establishes a contour surface equation of the spherical surface cam with a cylindrical roller, Which provides theoretical basis for the design and NC processing of the cam.
用球面坐标建立了圆柱滚子球面凸轮的轮廓曲面解析方程，为此种凸轮的设计计算和数控加工提供了理论依据。
Roller gear CAM mechanism is a type of indexing device. It is widely used in various automatic machines because of large indexing Numbers, high indexing precision, reliable localization etc.
弧面分度凸轮机构是一种精密分度机构，因其具有分度数大、分度精度高、定位可靠等优点，被广泛应用于各种自动机械中。
Systematic analyses are made on the realization of engagement at the controllable point and on the curved surface equation of point engaged sphere-conical roller arc surfaced indexing cam mechanism.
还系统地分析了可控点啮合的实现及点啮合球锥滚子弧面分度凸轮机构的曲面方程。
With the background of Gatling gun′s cam curve slot and main roller system, dynamics analysis of high speed inverse cylinder cam mechanism was carried out.
以转管武器凸轮曲线槽主滚轮系统为背景，进行了高速反圆柱凸轮机构滚轮动力学分析。
On the basis of the motion graph, the roller-gear-cam and driven roller in ATC are given a motion analyze.
介绍了自动换刀装置的换刀过程、滚子齿形凸轮机构的运动循环图设计，并进行了分析。
Both the CAM and its roller are badly dented.
凸轮和滚轮都有严重凹陷。
The special speed-ratio function designed in this paper can make driven cam profile that meshing with driving roller no curvature interference.
按本文的方法设计特殊速比函数，可使与主动滚子啮合的从动凸轮廓线不会产生曲率干涉。
The equations is used whether roller is column or cone, cam is in spine or groove location, left or right helical, single head or many heads and how it is turning.
该方程适用于滚子为柱型或锥型凸轮为槽定位或脊定位、单头或多头、左旋或右旋、上转或下转的情况。
The roller gear cam mechanism is studied and the surface equations of various types of roller gear cam are acquired.
本文对弧面分度凸轮机构进行了研究，根据凸轮旋向、转向、头数的不同，推导了各种类型的弧面分度凸轮的通用方程；
In this paper, the pressure Angle and minimal radius of curvature of CAM mechanism with swinging roller follower are discussed in details.
本文对摆动从动杆盘状凸轮机构的最大压力角和最小曲率半径问题进行了详细的讨论。
The AC Servo-System drive is used instead of the traditional CAM driving mode to keep the synchronization of the pin-roller motor.
采用交流伺服驱动代替传统的机械式的凸轮传动机构，实现针辊电机与主电机的同步驱动。
The AC Servo-System drive is used instead of the traditional CAM driving mode in order to realize pin-roller motor keep synchronization with the other motor.
采用交流伺服驱动代替传统的机械式的凸轮传动机构，实现针辊电机与其他电机的同步驱动。
The lower pairs were substituted for the higher pairs in order to study the specific properties of the disc cam with the circular profile and the follower attached to the roller.
并以最大无量纲速度和加速度为标准，将凸轮机构从动件常用运动规律特性与该圆弧凸轮的从动件运动规律特性加以比较，指出其适用场合为中、高速轻载。
Mathematical formulas are derived comprehensively and systematically for the profile coordinate, pressure Angle and radius of curvature of the cylindrical CAM with an oscillating roller follower.
本文较为全面系统地推导了摆动滚子从动件圆柱凸轮的廓线、压力角及廓线曲率半径方程，并讨论了该种凸轮机构在各种运转情况下与之相适用的方程。
Summarize the characteristics of roller-gear-cam and structure in ATC. Introduce the tool change process of automatic tool change, draw the motion circle graph.
总结了滚子齿形凸轮的特点及其在自动换刀单元（ATC）中滚子齿形凸轮的结构形式。
The virtual prototype model of indexing cam-roller chain drive system of die-cutting machine is constructed in the computer environment based on multi-body dynamics theory.
应用多体动力学理论，建立了包含分度凸轮-链系统的模切机步进系统虚拟样机模型。
Therefore the author built a 3-d model based on the surface equations of roller gear CAM, and presented a method of using coordinate measuring machine (CMM) to measure the surfaces of the CAM.
为此，本文以弧面分度凸轮的轮廓面方程为基础，建立了弧面分度凸轮的三维模型，提出了一种用三坐标测量机测量其轮廓面误差的方法。
In modernized high-seed automatic machine, often used the intermittence and graduation transmission mechanism with worm-cam and roller-gear.
在现代高速自动机中 ，经常使用蜗杆凸轮—滚子齿轮间歇分度传动机构。
In modernized high-seed automatic machine, often used the intermittence and graduation transmission mechanism with worm-cam and roller-gear.
在现代高速自动机中 ，经常使用蜗杆凸轮—滚子齿轮间歇分度传动机构。
应用推荐