Shell aluminum alloy die-casting molding, high strength, high voltage electrostatic powder coating, corrosion resistance.
外壳铝合金压铸成型，强度高，表面高压静电粉末喷涂，耐腐蚀。
The wear resistance of casting composite medium manganese steel has been studied under the condition of impact abrasive wear.
研究了铸造复合中锰奥氏体钢在冲击磨料磨损条件下的耐磨性能。
This should ease the frustration of the encounter for those casting classes who can not obtain 100% resistance to spell interruption through talents and effects such as Concentration Aura.
这项改动会使那些不能通过天赋和专注光环等效果获得100%打断施法抵抗的职业可以从容的面对这场战斗。
The reason for resistance in casting in slab caster is analyzed, some correct measures found out.
分析了板坯连铸机拉坯阻力产生的原因，找出了正确处理措施。
In this paper, an apparatus for distortion intensive measurement of casting is designed to test the distortion resistance of several kind of casting materials.
设计了铸件变形强化测试装置，测定了几种不同材质的铸件抗变形能力。
Compared with the forging die steel, casting forging die steel although toughness is low, but high strength, red hardness is good, with low notch sensitivity and high resistance to thermal fatigue.
与锻造模具钢相比，铸造热锻模具钢虽然韧性低，但强度高、红硬性好，具有较低的缺口敏感性和较高的抗热疲劳性。
The microstructure and wear resistance of Ni based alloy coating on the high temperature alloy GH33 by laser melt casting have been studied.
研究了高温合金GH33表面激光熔铸镍基合金涂层的组织和耐磨性能。
To investigate the effect of titanium nitride coating on corrosion resistance of dental casting alloys.
研究氮化钛涂层对牙科铸造合金腐蚀性能的影响。
The high strength, high toughness, high fatigue strength, and unique wear resistance ADI offer design engineer great potential for casting design.
ADI的高强度、高韧性、高疲劳强度及优越的耐磨性为设计工程师提供了更具潜力的铸件材料。
We studied the metal tissue, hardness, resistance of Co-Cr alloy after casting.
本文对钴铬合金铸后在金相组织、硬度、抗腐蚀性能等方面进行研究。
The results show that main cause of conchoidal fracture forming is that composition segregation in solidification grain boundary of casting steel reduces the resistance of crack propagation.
结果表明，沿一次晶晶界的成分偏析对裂纹扩展阻力的降低作用是铸钢中贝壳状断口形成的主要原因。
The test indicates that contact fatigue life and wear resistance of surface quenched casting steels and Bainite quenched spherical cast iron are increased largely.
试验表明：经过表面淬火的铸钢和经过贝氏体淬火的球墨铸铁，其接触疲劳寿命和耐磨性大幅度提高。
The composite steel pipe made by the technology of SHS thermit centrifugal casting has excellent wear resistance and can be widely used in mines, electric power and building materials industry.
利用SHS铝热离心铸造技术制备的陶瓷内衬复合钢管具有优异的耐磨损性能，可广泛地应用于矿山、电力、建材等工业部门。
The results show that the series high temperature creep resistance die casting magnesium alloy has potential to make power-train parts with decrease of the weight greatly.
试验结果表明，所开发的抗蠕变压铸镁合金具有应用于汽车动力系统部件的制造并大幅度减轻重量的潜力。
Therefore, the mathematic expression of deformation resistance of 304 stainless steel strip continuous casting was obtained according to the model built.
因此，根据建立的计算模型得到了薄带连铸304不锈钢的变形抗力数学表达式。
The nickel cost iron has good corrosion resistance, better mechanical properties and satisfied casting properties.
该镍铸铁具有良好的耐蚀性能、较好的机械性能与满意的铸造性能。
The results show that the wear resistance of casting composite medium manganese steel is 5.41 times that of Hadfield steel.
结果表明：铸造复合中锰奥氏体钢的耐磨性是高锰钢的5.41倍。
The casting properties, physical properties and corrosion resistance of the alloy are determined.
测定了合金的铸造工艺性能、物理性能和耐腐蚀性能。
The Influence of quenching temperature on wear resistance of high boron casting steel was investigated.
研究了不同的淬火温度对高硼铸钢冲击耐磨性的影响。
The short fiber reinforced aluminum silicon alloy gradual composites are manufactured by squeeze casting, and the structures and the wear resistance of the composites are studied.
采用挤压铸造技术制备短纤维增强铝硅合金梯度复合材料，研究了这类材料的凝固组织和耐磨性能。
The resistance to corrosion is comparatively poor for pressure-casting grid.
这是因为压力铸造正板栅抗腐蚀性能较差造成的。
They have found a main reason of poor abrasion resistance of the first cane mill roller is due to its poor casting quality during melting and casting.
找出国产榨辊比外国榨辊耐磨性低的原因主要是铸造与熔化水平低，铸件内在质量差造成的。
It had good corrosion resistance, better synthetical mechanical properties and casting properties.
它具有良好的耐蚀性能、较好的综合机械性能与铸造性能。
It is suitable for roughing to finishing machining of heat-resistance alloy, ti alloy, casting iron and aluminum alloy.
适用于耐热合金、钛合金、铸铁和铝合金的粗加工到半精加工。
Casting aluminium alloy ZL305A is a new shipbuilding material with high strength, good ageing stability, excellent corrosion resistance.
本文介绍研制的新型铸造铝合金zl305a是一种强度高，时效稳定性好，耐蚀性优良的船用新材料。
The main part of light USES high press die-casting aluminum. It has the features of impact resistance and corrosion attack.
灯体主要结构部件采用高压铸铝压铸组成，具有抗冲击、耐腐蚀的优点。
Increases your resistance to all magic by 40 and allows 30% of your mana regeneration to continue while casting.
增加你对所有法术的抗性40，并且允许你在施法中30%的魔法恢复。
The influence of rare earth modification on the improvement of structure and corrosion resistance of Ni-base alloy for casting as well as on its casting properties is studied in this, paper.
本文研究了稀土变质处理对改善铸造镍基合金的组织和耐蚀性能与铸造性能的影响。
The results show that the grain is fined, the morphology of reticulation carbides is improved, the hardness and wear resistance of casting high speed steels are also enhanced by modifying treatment.
研究了热处理工艺对铸态和变质处理铸造高速钢组织与性能的影响。
The results show that the grain is fined, the morphology of reticulation carbides is improved, the hardness and wear resistance of casting high speed steels are also enhanced by modifying treatment.
研究了热处理工艺对铸态和变质处理铸造高速钢组织与性能的影响。
应用推荐