The selection of primer, and the influences of UV-curable resin and monomers on the properties of top coat were discussed.
讨论了底漆的选择，以及光固化树脂和单体对面漆性能的影响。
Feature, superiority, application and existent problem of waterbore UV coatings, along with selection of the resin and photo initiator are briefly introduced.
简述了水性UV涂料的特点、优势、应用以及树脂、光引发剂的选择和所需解决的问题。
The selection of regenerant and determination of regeneration conditions are discussed through single factor experiment for demagnesium to purify WPA by ion-exchange resin.
利用离子交换树脂脱除湿法磷酸中的镁，讨论脱镁树脂再生剂的选择及通过单因素实验选定再生条件。
The selection of chelating resin is summarized.
概述了螯合树脂的选型。
This paper studied the selection of resin type, reason of resin breakage, influence of solid content in reaction solution and method of resin deactivation and regeneration.
研究了树脂催化剂类型的选择，树脂易破碎的原因，反应液中同含量对反应的影响，以及树脂的失活与再生方法。
The selection of resin and curing agent and the equipment and the technology are discussed for manufacturing resin coated sand as proppant for hydraulic fracturing.
讨论了制备用作压裂支撑剂的树脂覆膜砂使用的树脂和固化剂的选择、包胶设备及工艺。
This paper studied the raw material selection and formulation design of the alkaline batteries conductive antisepsis coatings. The selection and dosage of resin is important.
研究了碱性电池导电防腐涂料中原材料的选择、配方的设计，其中树脂的选择和用量至关重要。
The selection of the epoxy modified acrylate resin, butylated amino resin and wax powder is discussed.
讨论了环氧改性丙烯酸树脂、氨基树脂及蜡粉的选择。
Advance on the curing agent of UF resin was reviewed, included properties of UF resin, curing theory, types and selection for curing agent of UF resin.
叙述了UF树脂固化剂研究进展，包括UF树脂性质、UF树脂固化理论以及UF树脂固化剂种类和合理的选择固化剂。
The selection of resins, mixing process, monomer ratio, molecular weight of the resin and film crosslinking density were discussed.
讨论了环氧树脂的选择、混合方式、单体配比、树脂分子量和漆膜交联度等问题。
Proper selection of the resin, pigments and fillers and additives, Especially, a special additive T and formulation lead to the average reflectance ratio is up to 80.
通过所用树脂、颜填料和助剂的选择和搭配，尤其针对本研究体系的特殊性，采用了一种特种助剂T，使研制的涂层在可见-近红外波段的反射比达到80。
This article introduces the reasonable selection of fibre and resin, as well as infusion molding, fibre placement and EB curing technology.
本文介绍了纤维与树脂的合理选用以及渗透成形、纤维铺放和电子束固化技术。
This article introduces the reasonable selection of fibre and resin, as well as infusion moulding and fibre placement and EB curing technology.
本文介绍了纤维与树脂的合理选用以及渗透成形、纤维铺放和电子束固化技术。
Water supply have to endure a certain degree of pressure, usually large selection of molecular weight, good mechanical properties of PE resins, such as HDPE resin.
给水管必须承受一定的压力，通常要选用分子量大、机械性能较好的PE树脂，如HDPE树脂。
Problems of selection of raw materials and layout of equipment and process bewared in design of resin-bonded sand shops are introduced and rationalization proposal set forth.
介绍了树脂砂车间工艺设计中选择原材料、设备和工艺布局时应注意的问题，并提出了一些合理化建议。
Combined with the examples about scheme selection of recycle cooling water system in C5 petroleum resin plant, a practicably simple and reasonably economical method is introduced for reference.
本文结合C_5石油树脂工厂的循环冷却水系统方案比选的实例，介绍一种简便易行、经济合理的方法，供同行们参考。
In this paper, synthesis, selection of raw materials, and flame resistant properties of light transparent and flame retardant unsaturated polyester resin TZ 2 were described.
叙述了透光阻燃不饱和聚酯树脂tz2的合成方法、原料选择及该树脂的基本物理性能、阻燃性。
In the high-pressured tank anticorrosion material selection, we completely use the YR-T series organic high temperature anti-corrosive resin mortar which developed by our company.
在高压釜防腐选材上，我们全部采用我公司研制的YR - T系列有机高温耐腐蚀树脂胶泥。
Objective: To investigate the optimal preparation method of arctigenin including enzymatic hydrolysis condition, extraction process and selection of macroporous resin.
目的：优化筛选牛蒡苷元的酶水解条件、提取工艺和大孔树脂型号，得到适合工业生产的工艺流程。
Objective: To investigate the optimal preparation method of arctigenin including enzymatic hydrolysis condition, extraction process and selection of macroporous resin.
目的：优化筛选牛蒡苷元的酶水解条件、提取工艺和大孔树脂型号，得到适合工业生产的工艺流程。
应用推荐