Research on numerical simulation of dewatering effect and design optimization;
研究表明，溶液的降黏效果与溶液的初始黏度有关。
Algorithm research on numerical simulation of nonlinear problem for high energy laser propagation in the atmosphere has been curried out.
对高能激光大气传输非线性问题的数值模拟进行了计算方法的研究。
In this paper, the research on numerical simulation of punch-forming parameters for automobile frame parts of sheet metal is done by using the non-linear FEM software SHEET-FORMING.
本文以非线性有限元软件包SHEET- FORMING对某汽车落地骨架零件的冲压工艺参数进行数值模拟研究。
In view of dispersion, the application of guided wave NDT of pipe based on magnetostrictive effect was analyzed by the combination of numerical simulation and experimental research.
利用数值模拟和实验研究两种手段，从频散的角度分析了基于磁致伸缩效应的导波无损检测技术在圆管检测中的应用。
And it had been proved that rational pressure could meet the actual demands of development by research of numerical simulation on typical block.
而通过典型区块的数值模拟研究，进一步证实了所测算出合理压力水平是符合开发实际需要的。
Meanwhile, the article discussed the application of present theory analysis and numerical simulation method and predicted the trend of the research on the flammable gas explosion.
同时讨论了己有理论分析方法和数值模拟方法的应用，分析了可燃气云爆炸研究的发展趋势。
This paper sum up the scientific signification, research actuality and perspective of its application of numerical simulation on ventilation of the solar chimney.
简要介绍了数值模拟技术在太阳能烟囱通风效应研究的科学意义、研究现状和应用前景作了分析总结。
So the research of numerical simulation on the laying process and strength analysis of wire rope has been carried out in this paper.
因此，本文进行了钢丝绳成形过程数值模拟和制品力学强度分析的研究工作。
Based on model test and numerical simulation, the research on displacement of a gravity anchorage of a suspension bridge has been carried out.
采用室内相似模型试验和数值模拟方法，对某悬索桥重力式锚碇变位问题进行了研究。
Effect of reversal time on energy consumption for the regenerative soaking pits is researched by numerical simulation and experimental research.
通过数值模拟和实验方法，重点研究了换向时间对蓄热式均热炉能耗的影响。
On the base of above research results, suitable numerical simulation methods for the cutting process of linear shaped charge with three different ways of detonation are brought forward.
在此基础上进一步提出了三种起爆方式下线性成型装药切割目标的恰当的数值模拟方法。
If this kind of problem can be solved using numerical simulation, it not only can do some research on those flow structure, but can save manpower, budget and time.
如果能够很好的利用数值模拟解决这类问题，不仅可以很好地对这些水流流动结构进行研究，同时相对于试验来说可以节省人力、财力和时间。
By means of numerical simulation, the research on inner-flow of mining contra-rotating axial flow fan working under low flow rate condition was made.
通过数值模拟手段，对一矿用对旋式轴流式通风机小流量工况内部流动进行了深入研究。
Consequently, research and numerical simulation on flow, combustion and decomposition in pre-calcined systems is one of the important research problems in cement industry.
因此，对新型干法水泥核心设备—预分解系统内流场、燃烧及分解等相关问题进行系统研究与分析已成为水泥工业领域中的重要研究课题之一。
The research of three dimensional numerical simulation of welding process on thick plate has been conducted.
采用厚板试件对焊接过程的三维数值模拟进行了初步研究。
In this paper, research progress on numerical simulation of planar flow casting procession is reviewed.
本文对平面流铸工艺快速凝固过程的数值模拟研究现状作了介绍。
In numerical simulation minimum thickness was taken as forming limit criterion. The research on the relation between minimum thickness and strain paths was carried out.
在数值模拟中应用最小厚度作为成形极限判据，研究最小厚度值与应变路径的关系。
The feasibility of counterflow scheme is validated by research on the internal aerodynamic characteristics of nozzle using numerical simulation.
利用数值模拟的方法，通过对逆流方案中喷管气动性能的研究验证了逆流推力矢量方案的可行性。
At present, the most competitive research method of foundry technology is numerical simulation on mold filling and solidification process.
当前，铸件充型凝固过程数值模拟是最具竞争力的铸造工艺研究方法。
The purpose of this paper is to apply GFEM to make a research on concrete crack problem, so find a new way to the numerical simulation of concrete structure crack.
本文旨在应用广义有限元法研究混凝土的开裂问题，为混凝土结构裂缝的数值模拟工作开辟一条新的途径。
It is main research method to apply the CFD technology to carry on the numerical simulation for hybrid ventilation system.
应用CFD技术对混合通风系统进行数值模拟成为混合通风的主要研究方法。
Research is conducted on the numerical simulation and optimized design for mechanical ventilation of barn.
本文对粮仓机械通风数值模拟及优化设计进行了研究。
The foreign countries have utilized the methods of wind tunnel test and numerical flow simulation, and carried out the series research on this problem.
国外利用风洞模型试验和流场数值模拟计算的方法，对此问题进行了系列化的研究。
By theoretical analysis, numerical simulation and experiment research, the Interleaver based on optical all-pass filter technique is investigated.
对基于光全通滤波技术的奇偶交错滤波器进行了理论分析、数值模拟和实验研究工作。
In this paper, there will be research on the performance of refrigeration system on the impact of evaporative condenser with solution based on experimental testing and numerical simulation.
本文在实验测试和数值模拟的基础上研究了溶液再生式蒸发冷凝器对制冷系统性能的影响。
Based on the research of a new irrigation technique-sucking irrigation method, the numerical simulation is made for the water motion in soil layer under sucking irrigation condition.
通过对节水灌溉新技术——吸灌技术机理的研究，建立了吸灌条件下的土层土壤水分运动数学模型。
The directions of further research on the phase field method are aimed at better numerical arithmetic, more precise model, 3d quantitative simulation and utility.
以后进一步研究的重点方向是更优的数值算法、更精确的数值模型、三维定量模拟以及实用化研究。
Conclusion This model is verified to be scientific and its numerical simulation results are obtained, providing a helpful quantitative analysis for the research on the laws of bacterial wave growth.
结论证明了模型的合理性并给出了模型的数值模拟结果，为研究细菌波动生长规律作了量化分析探索。
Conclusion This model is verified to be scientific and its numerical simulation results are obtained, providing a helpful quantitative analysis for the research on the laws of bacterial wave growth.
结论证明了模型的合理性并给出了模型的数值模拟结果，为研究细菌波动生长规律作了量化分析探索。
应用推荐