Solution: Double-check what type of removal you requested by looking at the "Removal Type" column.
解决方案：通过查看“删除类型”栏，再三确认你请求删除的类型。
Preservation type and method of removal must always be included with all commodity.
l防腐剂类型和替换方法必须始终包含在货物运输和长期储存程序中。
The dermatologist will check the type of your skin and on the acne scar and on that basis he would recommend a particular method of acne scar removal.
皮肤科医师会检查类型的皮肤和你的痤疮疤痕，他将在此基础推荐某一方法去除痤疮疤痕。
Using split type membrane bioreactor ( MBR) can achieve effective removal of alpha olefin sulfonate (AOS)in simulant wastewater.
采用分置式膜生物反应器（MBR）进行去除模拟废水中a-烯基磺酸钠（AOS）的实验。
The experimental result shows that the organic cationic type oil removal agent is good for solving this kind of oil-bearing wastewater treatment problems.
试验证明，有机阳离子型除油剂能够较好的解决胜利油田注聚采出液含油污水处理问题。
On the base of the constant removal rate of the metal material, the motion model of tangential point tracing grinding of Non-round parts should be given respectively according to type of the parts.
基于恒金属去除率的原则，根据零件的特点分别建立了非圆零件切点跟踪磨削的运动模型。
There is an optimal filtration rate for a certain set of planning parameters, i. e., the type of dust removal equipment, dust cleaning, dust bag fabric and fabric structure.
对某一组规划参数(即环保除尘设备型式、清灰组织、除尘布袋纤维材料和织物构造、尘埃性质等)有一个最佳过滤速度。
Based on the analysis of test result on filtration of airborne particle, the feasibility on removal of oil mist by using wash-type metal filler air filter is analyzed.
在对大气尘过滤试验结果进行整理分析的基础上，对采用洗涤式金属填料空气过滤器去除油雾的可行性进行了分析。
FJL-40 type air-floated oil skimmer structure, oil removal principle and influence factor of air-floated oil removal are described.
介绍了FJ L - 40型气浮除油机结构、除油原理和气浮除油的影响因素。
The average dust removal efficiency of the SW type smoke gas purifying device can reach 96.4% under the normal work condition.
在正常工作条件下，SW型燃煤炉窑烟气净化装置的平均除尘效率可达96 4%。
The influences of the type of EVA, the content of the oxygen scavengers, temperature and humidity on the oxygen removal properties of the EVA deoxidizer film were investigated.
本文研究了EVA型号、脱氧剂含量、环境温度和湿度对这种脱氧膜的脱氧性能的影响。
The experimental result shows that the organic cationic type oil removal agent is good for solving this kind of oil-bearing wastewater treatment problem...
试验证明，有机阳离子型除油剂能够较好的解决胜利油田注聚采出液含油污水处理问题。
Based the principle of rust-removal with acid as well as the quantity of acid and temperature effects on rust -removal, triethyl phosphate, a new -type rust inhibitor, is prepared.
根据酸除锈的原理，酸量和温度对除锈的质量影响，试制出磷酸三乙酯化学除锈剂。
PMLP type plane series chain plate debris removal unit offers wide selection of transmission speed and working range and is of high working efficiency and has variable debris removal width.
PMLP型系列平面式链板排屑机，切屑输送速度选择范围大，工作效率高，有效排屑宽度多样化，可提供充足的选用范围。
Therefore, the removal way of cemented carbides in nozzle-type ELID grinding was mainly ductile removal mode.
因此，硬质合金材料去除机理主要为延性去除磨削方式。
The experimental results reveal that the transistor type pulse train generator is unsuitable for micro-EDM due to its low removal rate.
实验结果表明，自振式晶体管脉冲电源因其加工速度慢并不适于微细放电加工。
The step-fed sequencing batch reactor (SFSBR) is a new type of the enhanced nitrogen removal system, characterized by a multiple anoxic feeding for supplying the organic carbon source to denitrifiers.
分步进水序批式反应器（SFSBR）是一种依靠多步缺氧进水补充反硝化碳源的生物脱氮强化工艺。
Finally, through analyze the material handling and dust removal equipment, we designed the transportation equipment, and eventually type selection.
最后，分析研究了物料输送和除尘机构，对输送设备进行参数化设计，并最终选型。
The protonated coke waste was used as a new type of biosorbent for the removal of anionic dye Reactive Red 4(RR4) and cationic dye Methylene Blue(MB).
以城市污水处理厂的剩余污泥为原料，经过质子化处理制备成生物吸附剂，进行了吸附水溶液中活性红4（RR4）和亚甲兰（MB）的研究。
The protonated coke sludge biomass was used as a new type of biosorbent for the removal of anionic dye Reactive Red 4(RR4).
以焦化厂污水处理车间的剩余污泥为材料，经过质子化处理制备生物吸附剂，进行了吸附活性红4（RR4）的研究。
Magnetorheological Finishing technology (MRF) is a new type of developed flexible processing technology with easy control, removal function stable, no subsurface damage characteristics and so on.
磁流变研抛技术(MRF)是一种新型的柔性光整加工技术，具有易控制、去除函数稳定、无亚表面损伤等优点。
The type of pollutants have been studied is limited and the study on the mechanism is lack, specially on removal of organic compounds and heavy metals from micro-polluted water.
研究污染物的种类较少，反应机理研究欠缺，尤其是对微污染水中有机物和重金属的处理方面尚未系统地研究。
A numerical analysis of the heat and mass transfer in a heat pipe type falling film absorber was carried out, in which solution absorption and removal of absorption heat happened through heat pipe.
对热管式降膜吸收器溶液吸收传热传质并通过热管移出吸收热的过程进行了数值研究。
The result showed that the removal rate of this type of gelling agent to gasoline, diesel oil, kerosine and lubricating oil was higher than 90%.
结果表明，此类凝油剂对汽油，柴油，机油以及基苯及苯系有机溶剂等的去除率达90％以上。
All expansion joints shall have bolted flange-to-flange type connections on both sides of expansion joint for removal of complete unit. Minimum flange thickness shall be 6 mm.
所有的伸缩接头(膨胀节)都应当采用法兰栓接。法兰的最小厚度为6毫米。
In order to realize the mechanization of snow removal on roads, the utility model USES a double-crank type parallelogram linkage as a working mechanism.
为了实现道路除雪的机械化，本实用新型采用双曲柄型平行四杆机构作为工作机构。
This method make use of given error to control the section length and to removal superfluous type value points. The method can reduce working code length to a minimum without overgauge.
在给定的公差下，根据刀位点轨迹的程序段分割误差确定程序段的大小，剔除多余的型值点，保证加工指令的长度不超出CNC系统提供给用户的内存空间。
This method make use of given error to control the section length and to removal superfluous type value points. The method can reduce working code length to a minimum without overgauge.
在给定的公差下，根据刀位点轨迹的程序段分割误差确定程序段的大小，剔除多余的型值点，保证加工指令的长度不超出CNC系统提供给用户的内存空间。
应用推荐