In this paper, the reliability analysis methods of power supply networks in lifeline system.
设计采用了多种抗干扰措施，提高了电源系统工作的稳定性。
At first, the reliability analysis methods of kinematical accuracy and dynamical accuracy of mechanism are summed up.
首先归纳了机构运动精度可靠性分析和机构动力精度可靠性分析方法。
Cognitive reliability and Error analysis method (CREAM) is one of the representative second-generation human reliability analysis methods.
认知可靠性和失误分析方法(CREAM)是第二代人的可靠性分析方法中的代表方法之一。
Perform reliability testing and root cause and failure analysis of complex problems and systems using applicable statistical methods.
执行可靠性测试和根本原因和失效分析复杂问题和系统使用适用的统计方法。
Based upon the analysis of the FRP characteristics, methods for design, manufacture and management of reliability of FRP products are introduced.
在分析玻璃钢特点的基础上，介绍了玻璃钢制品的可靠性设计、生产和管理方法。
Illustrated with examples, it has reference value for the field life data analysis and reliability evaluation, illustrating several estimation methods concerning reliability function of deleted data.
结合实例说明了含有删失数据的可靠性函数估计的几种方法，对于现场寿命数据分析与可靠性评估具有参考价值。
The reliability analysis of DC sensor based on its reliability model is processed, and the methods used to improve the system reliability are presented.
基于可靠性模型对该直流传感器进行了可靠性分析，并提出了改进系统可靠性的措施。
Analysis of the power cable fault causes and classification of the power cable fault detection methods implemented to ensure the smooth flow of power supply to ensure supply reliability.
文章分析了电力电缆故障的原因及分类，探讨了电力电缆的故障实行的检测方法，保证了电力供应畅通、保证供电可靠性。
HAZOP (Hazard and Operability Analysis) is one of the useful methods to analyze the reliability of the system. It is widely used in the process industries.
危险与可操作性分析是分析系统可靠性的一种有效方法，在流程工业中被广泛应用。
Based on analysis of the regularity of mine water, the concepts and methods of the stochastic serve theory being applied, the queueing and reliability models of mine drainage system are developed.
本文在认真分析矿井涌水规律的基础上，应用随机服务理论的观点和方法，建立了矿井排水的排队论模型和系统可靠性模型。
This paper presents the design idea from bottom to top, and introduces various new design methods on the basis of analysis of failure mechanism and the reliability test.
在进行失效机理深入分析和可靠性试验的基础上，确立自下而上的设计思路，介绍了各种新的设计方法。
Briefly introduces the basic concept on engineering structure reliability and some practical calculation methods that are commonly used in the analysis of engineering structures.
简单介绍了工程结构可靠性的基本概念以及工程结构可靠性分析中常用的几种实用计算方法。
The fault tree analysis (FTA) is one of the basic methods in reliability engineering.
事故树分析法是可靠性工程的基本方法之一。
On the basis of analysis concrete methods for increasing the reliability of nc systems and utilization-coefficient of nc machine tools are also suggested.
并在分析研究的基础上指出了提高NC系统可靠性和NC机床利用系数的具体途径和方法。
The methods of system reliability analysis and optimization for wing-box structures are studied in this paper.
本文研究了翼盒结构的可靠性分析及基于系统可靠性的结构优化设计方法。
Some practical analysis methods for reliability vector of multilevel hierarchical and network aseismic engineering systems with intermediate state and failuredependence are established.
建立同时考虑中介状态和失效相关时多级递阶和网络抗震工程系统的可靠性向量模型及其实用分析方法。
Taking airplane power system for example, the conception of mutual heat reserve system is presented, the methods of reliability analysis and the working conditions of the system are introduced.
以飞机电源系统为例，提出了互为热贮备系统的概念，并归纳出其可靠性的分析方法，指出了各种方法的使用条件。
After the analysis and comparison of the existing vulnerability analysis methods, a new vulnerability model of distributed systems based on reliability theory is proposed.
对现有的脆弱性分析方法进行分析和比较，提出基于可靠性理论的分布式系统脆弱性模型。
On the basis of analysis for earthquake disaster and secondary disaster risks and for seismic reliability of system several kinds of empirical methods for losses assessment are proposed.
基于地震及次生灾害发生的危险性分析及系统抗震可靠性分析，给出了计算各类经济损失的实用方法。
Firstly, this article reviews the recent research state of landslides and reliability theory, discusses the fundamental methods about reliability analysis.
本文首先介绍了国内外滑坡和可靠性理论的研究现状，对可靠性分析的基本方法进行了讨论。
The different venture analysis methods of power supply reliability could affect the performance of the reliability management in the power supply enterprises.
应用不同的供电可靠性风险分析方法，会影响供电企业可靠性管理的效果。
In this paper the methods of mode analysis and the random time dependent reliability, based on crossing rate, of random time dependent structures are suggested.
本文首先建立了随机时变结构的振型分解法，然后基于随机时变结构的超越率提出了相应的结构随机时变可靠性的计算方法。
It provides a designed requirement of GO methodology reliability analysis system. In addition to the software frame, the actualizing methods are presented in detail.
提出了GO法可靠性分析软件的设计要求，给出软件的总体框图及软件实现方法。
Fault Tree analysis, Fault Modes and Effects analysis and Reliability Block Diagram are the popular methods for the system analysis.
常规的系统可靠性分析方法有故障树法、失效模式与影响分析法和可靠性框图法等。
In order to verify the reliability of the model, following the general rules of analysis, three methods have used to establish the mathematical model.
为了验证模型的可靠性，遵循分析问题的一般规律，先后采用了三种方法进行数学模型的建立。
Based on the detailed reliability analysis for common pressure relay, two methods were proposed to reliably keep pressure relay work.
对普通压力继电器的可靠性进行了详细分析，提出了保证压力继电器工作可靠的两种措施。
Analysis of Phase Disposition Double Ramp Comparison Control (PDDRCC) and PODRCC methods show that PODRCC method is easier to achieve and attains higher reliability.
通过对同相双载波补偿控制(PDDRCC)和反相双载波补偿控制(PODRCC)两种方法进行分析，得出PODRCC方法更易于实现且可靠性高。
This paper also studys the commonly used methods of optical network reliability analysis.
研究了光网络中的可靠性分析的常用方法。
Based on the analysis of the available methods of reliability weighted assignment for mechanical serial system, this paper employs fuzzy theory in the weighted assignment of reliability.
在分析原有机械串联系统可靠性加权分配方法的基础上应用了模糊理论，即充分考虑了影响系统各单元权数取值的各种模糊因素。
First, the basic theory and several computation analysis methods of reliability are discussed, and the First Order reliability method (FORM) and Monte-Carlo method are emphasized.
首先介绍了工程结构可靠度理论及分析计算的若干方法，重点阐述了FORM法和蒙特卡罗法。
应用推荐