However, only 20 of the 127 sites are proposed to be highly protected "reference" sites where any exploitation or damage by industry will be banned.
不过，在127个保护地中只有20个是被计划高度保护的，任何工业开发和破坏行为都是被严厉禁止的。
To solve the problem of ellipse - object - shape parameters detection in noise image, a new detection algorithm using nonlinear data fitting model and cross-reference iterative method is proposed.
为提高噪声环境下椭圆类物体形状检测算法的稳定性与准确性，本文提出非线性数据拟合模型结合交叉参考迭代的新思路。
A mutual model reference adaptive method for the rotor speed and stator resistance identification is proposed in this paper to implement a speed sensorless direct torque control of induction motors.
本文介绍了一种可互换模型参考自适应方法实现对电机转速和定子电阻的辨识，并将其应用于异步机的无速度传感器直接转矩控制中。
This study proposed market segmentation for reference to herbal garden managers to help them targeting the market correctly.
根据本研究所区隔市场之不同群体，提供香草园经营管理者参考，以利选择目标市场。
A multiplexing technique for holographic interferometry is proposed which USES multiple reference beams to encode and record holograms. The experimental results are presented.
提出一种用多束参考光进行编码记录实现多通道全息干涉计量的技术，并给出实验结果。
The uncertain object with dead time is taken as a reference model and a kind of adaptive rule is proposed to make parameters of the compensator to approach the object's.
以线性大时滞不确定被控对象为参考模型综合出自适应律，使预估补偿器的参数逐步逼近被控对象的参数直至相等。
Based on current concrete design criterion, a torsion stiffness formula for composite beams from the cracking stage to the limit stage was proposed for design reference.
基于现行硅结构设计规范，提出了组合梁从开裂到极限阶段抗扭刚度的计算公式，可供组合梁受扭设计参考。
The concept of IC Engineering is proposed in this dissertation, which makes reference to the methodology of the Software Engineering.
论文充分借鉴于成熟的软件工程学，首次提出了集成电路工程学概念。
Finally, proposed some questions to be solved urgently in the SOA's research, such as a recognized SOA reference model, an uniform SOA standard and the SOA security mechanism.
最后，提出在SOA研究中还急需解决的问题，如公认的SOA参考模型、统一的SOA架构体系标准及SOA的安全机制。
A new semiconductor temperature sensor with single light source is proposed. The light switch is used to construct a reference channel.
一种新型的单光源半导体温度传感器，利用光开关控制设置参考通道。
In this paper, a solution of a control system, which USES the standard time signal as the system reference to lock the local VCXO, is proposed.
论文提出了一个以远距离传输的标准时间信号为参考来锁定本地晶体振荡器的锁相控制系统的实现方案。
A new technique for multiplex holography is proposed in which all reference beams are encoded and recorded by means of a rotating prism to modulate the plane reference beams.
本文提出一种新颖的多重全息术，它是利用旋转光楔调制平面参考波的传播方向，实现编码参考光记录获得多重全息图。
Several quantitative drift measurement techniques for scanning probe microscopy (SPM) were introduced. A new method using two-dimensional zero-reference masks was proposed to measure the SPM drift.
对扫描探针显微镜(SPM)仪器漂移的定量测量的几种方法进行探讨，提出应用二维零位标记进行漂移测量。
Then, have proposed creatively several kinds of new mode houses of guarantee, which have certain reference value and realistic meaning to that our country perfects the house guarantee system.
然后，创造性地提出了几种住房保障新模式，对我国完善住房保障制度有一定的参考价值和现实意义。
The above description offers data for reference in order to save energy and highlight the productivity, with the way being proposed to save electric energy.
为提高生产率和节能提供参考数据，并提出了节约电能的途径。
This paper to solve the problems facing the landscape construction of small towns proposed small towns of landscape design argumentation way for your reference.
本文为解决小城镇景观建设面临的问题提出了文化型小城镇景观设计的途径，以供参考。
The simulation results of practical load forecasting show that the proposed method to select reference points and peak-valley load correction are more effective.
实际电网负荷预测的仿真结果验证了文中提出的相空间相关邻近点的选择方法与峰谷荷修正思想的有效性。
A new composite nonlinear output feedback controller is proposed to track the time-varying reference inputs for multivariable linear systems with input saturation.
针对多变量饱和线性系统的时变参考输入跟踪问题，研究了一种组合非线性输出反馈控制器的设计方法。
Fire resistance calculation formula is proposed through analysis in the end to provide the reference for CFRP reinforced concrete beams fire design.
通过本文分析，提出了计算CF R P筋混凝土梁耐火极限的建议公式，为实际防火设计提供参考。
The dynamic parameters of rockfill material can be estimated according to the proposed formula and the reference range, in case the test data is not enough.
对试验资料不充分的情况，按本文建议的公式或取值范围对堆石材料的动力参数进行估算，可以满足工程需要。
The methods to modify the volatility amount of organic vehicle were proposed, and the volatility data are useful for the reference of the sintering temperature schedule of electronic paste.
提出了调节有机载体在不同温度下挥发量的方法，可为电子浆料烧成温度制度提供参考。
Furthermore, the dynamic design method proposed in the paper can taken as reference to dynamic design of precise electronic apparatus.
本文研究中所提出的动态设计方案，对精密电子设备机械部分的动态设计有一定的参考作用。
And some design ideas were proposed to provide reference for process design of the flare knockout drum in chemical plant.
提出了大型火炬分液罐设计的思路，为化工装置火炬分液罐的工艺设计提供参考。
A theory is proposed that safety reference environment can be got by modifying standard reference environment. The exergy is used to valuate the environmental impact of different pollutants.
提出通过修正标准参考环境而确定安全基准环境的理论，然后用足用参数来评价不同污染物的环境影响。
For solving the problem which DEA only can use to evaluate relative efficiency, a method of choosing reference DMUs is proposed.
针对DEA只能用于相对有效性评价的不足，提出了遴选参考集的解决思路。
Two methods of determining ignition advance Angle are proposed according to different reference point, and the reason for this difference of the two methods are analyzed.
按参考点的不同，提出了两种确定点火提前角的方法，并分析了两种方法产生差别的原因。
The technique proposed here to solve the optimal design of speed reducers and the corresponding calculation are of practical reference value.
用模糊数学概念，深化解决减速器优化设计问题的方法和计算结果，具有实际参考意义。
Finally, on the above results from ANSYS and reference presented, the method to design and construct economic and reasonable types of connections is proposed.
最后，根据ANSYS模拟的结果及已有研究成果，提出了梁柱连接节点经济合理的设计施工方法。
According to the proposed fractal model, the radial effective thermal conductivity of wood was calculated and compared with the experimental measurement results and the data in the reference.
利用分形模型对木材径向有效导热系数进行了计算，并与实验测量结果和文献中的数据进行了比较。
According to the proposed fractal model, the radial effective thermal conductivity of wood was calculated and compared with the experimental measurement results and the data in the reference.
利用分形模型对木材径向有效导热系数进行了计算，并与实验测量结果和文献中的数据进行了比较。
应用推荐