Sample and Hold, Voltage Reference Circuit design.
采样保持电路、电压源电路设计。
A novel exponential curvature-compensated bandgap reference circuit is presented.
提出了一种新型的指数曲率补偿带隙基准源电路。
The start-up circuit was design for the bandgap voltage reference circuit working normally.
另外设计了启动电路以确保基准电路能正常工作。
A bandgap voltage reference circuit with good stability and high accuracy is designed in this pa - per.
设计了一种具有良好稳定性和高精度的带隙基准电压源电路。
A low voltage current mode bandgap voltage reference circuit with a novel start-up circuit is designed.
介绍了一种低压电流模带隙电压基准电路，并提出了一种新颖的启动电路结构。
This paper introduces a low supply voltage band -gap reference circuit which used a self-bias cascode current mirror.
因此介绍了一种采用自偏置低压共源共栅电流源的带隙基准电路结构，用两个电阻代替了偏置电路。
A high-precision CMOS current reference circuit is proposed for using in low-dropout (LDO) voltage regulators with low power.
设计了一种新型的用于低功耗LDO线性稳压器的CMOS高精度参考电流源。
Generally, the harmonic phase reference circuit is a comb generator in frequency domain and a pulse generator in time domain.
谐波相位参考在频域上为梳状波而在时域上为很窄的脉冲序列。
Design a bandgap voltage reference circuit and a voltage-modifying circuit to provide precise voltage and current reference for the referred ADC.
设计了基准电压源和电压微调电路，为adc提供参考电压和电流，而且能进行一定范围内的微调。
Starting from analyzing the general principle of typical bandgap reference circuit, the design of a CMOS bandgap reference circuit with adjustable output is discussed.
从分析典型的能隙基准电路的一般原理入手，重点讨论了一种输出可调节的CMOS能隙基准电路的设计。
Thermal stability and Power Supply Rejection Ratio of the voltage reference circuit are the two major factors that influence the precision and stability of the whole system.
它的温度稳定性和电源电压拟制比是影响整个系统精度和性能的关键性因素。
It was discussed the check principle structure, the codes' transmitting, closed loop check, reliability of the closed loop Telegraphic codes System with some reference circuit.
对闭环电码化系统检测原理结构、发码过程，闭环检测、可靠性等进行分析阐述，并给出部分参考电路。
Thermal stability and Power Supply Rejection Ratio (PSRR) of the voltage reference circuit are the two major factors that influence the precision and stability of the whole system.
它的温度稳定性和电源电压抑制比是影响整个系统精度和性能的关键性因素。
In this paper, we studied on critical current mode active Power Factor Correction technology, and did a detailed analysis and design on voltage reference circuit and analog multiplier circuit.
本文研究了有源功率因数校正技术中的临界导通模式的基本原理，并对其中的电压基准源和模拟乘法器做了详细的分析和设计。
By analysis of explosion accident of high voltage little oil circuit breaker, found out the weak link existed on this breaker, for which proposes some Suggestions for reader reference.
通过分析一起高压少油断路器爆炸事故，从中找出断路器本身存在的薄弱环节，为此提出一些改进建议供读者参考。
The low-voltage driving circuit is adopted to drive a piezoelectric ceramic phase shifter to shift the phase of the reference beam, so as to make the instrument lighter, smaller and cheaper.
采用低压驱动电路驱动压电陶瓷相移器对参考光束进行相移，从而使仪器质量减轻、体积缩小、成本降低。
The "reference direction", which plays an important role in the electric circuit, is a kind of method and means for analyzing and calculating the electric circuit.
“参考方向”在电路中起着十分重要的作用，是分析计算电路的一种方法和手段。
Most CIRCUIT designers take "ground" reference for granted.
多数电路设计师都愿意用“地面”作为参考。
The potential of a corroding surface in an electrolyte relative to a reference electrode under open-circuit conditions.
在断路情况下，在与基准电极相关的电解液中，表面受到侵蚀的潜在可能性。
The system is doubly-fed generator rotor side converter control circuit, although not perfect, there must be reference value.
该系统是双馈发电机转子侧的变流器控制电路，虽然不是很完善，有一定得参考价值。
And a reference interface circuit is given.
给出了一个参考接口电路。
According to Faraday's Law of Electromagnetic Induction, using the reference direction of circuit variation, it can find a method of V-A Equation made by mutual inductive circle at its option.
本文依据法拉第电磁感应定律，利用电路变量的参考方向，找出了获得任意情形下互感线圈v - A方程的一种方法。
Based on the rock conductivity model and with reference to calibration circuit in the dual laterolog tool, designed is calibration circuits in the complex resistivity logging tool.
在岩石导电模型的基础上，参考双侧向仪器刻度电路原理，设计出适用于复电阻率测井仪器的刻度电路，并给出用电路参数模拟不同地层的方法。
The potential energy of a unit charge at any point in an electric circuit measured with respect to a specified reference point in the circuit or to ground; voltage.
电势，电位相对于电路中某一特定参照点或地面的属于电路中任何一点的单位电荷势能；电压。
The first stage circuit receiving the first reference voltage input, while the second input to receive input signals.
第一级电路的第一输入端接收参考电压，而第二输入端接收输入信号。
Circuit Breakers are supplied to protect the 115 VAC Inputs (2 each) as well as the Variable Amplitude Low Voltage Powers used by the Indicator Under Test (UUT) for Power, Reference or Lighting.
断路器被提供用于保护115VAC输入(各有2个)，以及保护被测指示器(UUT)所用于电源，基准或照明的可变振幅低压电源。
Adds and subtracts the fast electric circuit, the theoretical analysis, the instruction documents the electrical machinery designer has the value reference!
加减速电路，理论分析，指导性文档。电机设计者有价值参考！
The voltage reference generator was the expansion of the bandgap circuit for saving the resources.
基准电压产生电路为带隙电路的扩展，节省了资源并得到了高稳定度的基准电压。
A reference sinusoidal circuit based on digital technique and synchronous with the line voltage is investigated. The design principle of the key circuit parameters is given.
本文研究了一种采用数字化技术，实现与电网电压同步的基准正弦电路的原理，给出了电路关键参数的设计原则。
A reference sinusoidal circuit based on digital technique and synchronous with the line voltage is investigated. The design principle of the key circuit parameters is given.
本文研究了一种采用数字化技术，实现与电网电压同步的基准正弦电路的原理，给出了电路关键参数的设计原则。
应用推荐