ATP simulation and MATLAB calculation show that the voltage ratio protection against inter-turn fault of reactor can make correct judgement to this kind of fault quickly.
基于ATP的仿真和Matlab的运算表明基于电容器电感器电压比的电抗器匝间短路保护，能够对匝间故障做出快速而正确的判断。
Using CFX, the numerical simulation of the core flow distribution was performed for China Advanced Research Reactor (CARR) with the porous media model.
应用计算流体力学软件CFX，采用多孔介质模型对中国先进研究堆(CARR)的堆芯流量分配进行了数值模拟。
Continuous Stirred Tank Reactor (CSTR) simulation study has proved that an effective diagnosis could be achieved by using CPFDON to represent the fault diagnosis knowledge of chemical process.
连续搅拌釜反应器仿真研究表明，利用化工过程故障诊断本体论表示化工过程的诊断知识可以获得良好的诊断效果。
Then on the basis of the simulation, the operation condition of the reactor is analyzed and the problems existing in the present operation are discussed.
然后在模拟的基础上对该反应器的操作状况进行了分析，指出了目前操作中所存在的问题。
Numerical simulation of the flow field of the standard fuel assembly in China Advanced Research Reactor is carried out by using computational fluid dynamics software CFX4.4 and CFX5.5.
采用计算流体力学软件CFX4.4和CFX5.5对中国先进研究堆标准燃料组件流场进行了数值模拟。
This method can describe the water flow velocity and vortex function distribution on all points of the reactor, with the simulation result in good coincidence with field test data.
该方法能够描绘出反应器内各点的水流速度以及涡流函数分布，且模拟结果与试验测定结果吻合得较好。
The procedure is based on a finite difference time domain(FDTD) scheme. The numerical results will offer theoretic reference for streamer discharge simulation or geometry optimization of reactor.
数值计算运用时域有限差分（FDTD）法，数值模拟结果为以后的反应器流光放电模拟及结构优化提供依据。
The surface reaction is performed in the grid simulation reactor.
而表面反应通过格子模拟反应器进行。
Dealing with this problem, we intend to build a simulation experiment to replace this experiment which uses "real" reactor and fuel components.
为了解决这个问题，我们希望能够寻找出替代用“真材实料”的反应堆和燃料棒实验的方法，来模拟这个实验。
The simulation result can describe the temperature field and the distribution of volume fraction of mixed gas in methanol reforming reactor.
模拟结果可以直接表征反应器内的温度场、气体组分体积分数分布。
The result of study shows that simulation model set up on the simulation platform can factually simulate the radioactive gas dose released from the reactor during normal operation.
研究结果表明，通过在仿真平台上建立的气体流出物放射性仿真模型能够真实地模拟反应堆正常运行期间释放的放射性气体的放射性水平。
At the same time, use FLUENT computational fluid dynamics simulation software to optimize the structure of MAP reactor.
同时运用FLUENT计算流体力学模拟软件，模拟并优化了MAP反应器的结构。
The application of RBF neural network in hardy nonlinear system and the result of simulation is introduced. An example of pH control in hydroxylamine reactor is described.
以某厂羟胺反应器的氢离子浓度控制为例，介绍了径向基函数（RBF）神经网络在强非线性对象预测控制中的应用及仿真研究结果。
For further research work on reactor neutrino experiment, we performed the first simulation of the emissions of electron neutrinos from a nuclear reactor.
为充分利用反应堆开展对电子中微子各项物理属性的研究，首次对反应堆电子中微子通量进行了模拟计算。
The paper reports the model of the reactor core of the PWR nuclear power plant and established the suitable core physics-mathematics model for microcomputer simulation.
阐述了PWR核电站堆芯的模型化问题，提出了适用于微机仿真的核电站堆芯的物理数学模型。
Simulation calculation was carried out on industrial oxidation reactor on the basis of building a suitable para-xylene oxidation reaction kinetics.
在建立合适的对二甲苯氧化反应动力学基础上，对工业氧化反应器进行了模拟计算。
Based on mechanism analysis, a dynamic model of FCCU reactor-regenerator system is given. It can be used for simple process characteristic analysis and for control system simulation.
针对催化裂化装置反应再生系统，进行了动态机理建模研究，给出了可以用于过程特性分析和控制系统仿真研究的动态机理模型。
The designs of the two cold neutron guides, CNG1 adn CNG2, to be built in China advanced research reactor (CARR) are studied with MonteCarlo simulation technique.
应用蒙特卡罗方法对中国先进研究堆（CARR）上的两条冷中子导管CNG1和CNG2的设计方案进行了模拟研究。
Advanced modeling and simulation tools help improve the safety and efficiency of reactor operations while reducing the costs associated with building prototypes and running large-scale experiments.
高级建模和仿真工具，有助于提高反应堆运行的安全性和效率，同时降低相关的成本与建立原型和运行大规模的实验。
Both theoretical analysis and simulation prove that rationally designed leakage reactance of the primary winding can play a role of balancing reactor.
理论分析及仿真计算证明：地铁车辆辅助电源中变压器原边绕组的漏抗通过合理的设计，可以起到该平衡电抗器的作用。
The reactor of ethylene oxide prepared by ethylene oxidation was simulated by one-dimension and two-dimension models. The simulation results were coincident with the industrial data.
用一维和二维数学模型模拟了乙烯氧化制环氧乙烷反应器，模拟结果与工业实际生产的数据吻合较好。
The effectiveness of the method is verified by the simulation research on a strong heat-releasing chemical reactor during which a lower order model is configurated.
应用低阶的模型对一个强放热的化学反应釜模型进行的仿真研究检验了该方法的有效性。
The normal pressure and oxygen-rich leaching process of sphalerite concentrate is investigated under the simulation condition in reactor.
在反应釜模拟常压富氧浸出条件，研究锌精矿常压富氧浸出过程。
Thirdly, the study is the numerical and experimental simulation on that the temperature field of the bed in the snake loop heat pipe chemical reactor.
第三部分为热管化学器内部床层温度场数值模拟与试验研究。
These data have provided a basis for the process analysis and mathematical simulation of inverse turbulent bed reactor.
研究结果可为后续逆流湍动床废水生物处理过程分析与模拟提供传质基础数据。
The equation may be used in simulation, design and optimization of shift conversion reactor.
该方程可用于工业反应器的模拟，设计和优化。
At the same time, simulation of concentration field has great significance in researching characteristic of injection dispersion process and flow model of oscillatory flow reactor.
同时，浓度场的模拟对于注入分散特性的研究，对于振荡流反应器的流动模型的研究都具有重大的意义，它为完成这方面的工作提供了另一种方法。
The presented method has been applied to the modeling and optimal control of a semi-continuous reactor, and simulation results show that this new method is effective and accurate.
所提方法用于一个半连续式反应器的建模和最优控制，仿真结果表明新方法是有效和准确的。
The reactor structure was optimized according ; o the simulation results.
根据模拟计算的结果，我们优化了反应器的结构。
The reactor structure was optimized according ; o the simulation results.
根据模拟计算的结果，我们优化了反应器的结构。
应用推荐