The reactive temperature had no effect on the test paper reaction.
该试纸反应不受温度影响。
The reactive temperature of flash stove directly influences the product's quantity and quality.
闪速炉的反应温度直接影响产品的产量和质量。
The effect of molar ratio of reactants and reactive temperature on the yield of product is investigated.
考察了反应物投料摩尔比和反应温度对产物收率的影响。
In the hydrolyzation process of waste polymer the yield is effected by reactive temperature, time and ratio.
在废聚合物水解过程中，其收率主要是受反应温度、反应时间和反应配比的影响。
Not only the influence of different reactant concentration and mole ratio of monomers to the reactive yield , but also the influence of reactive temperature to the imidization degree were discussed.
讨论了不同反应浓度以及单体摩尔比对酰亚胺二元酸的产率的影响和反应温度对酰亚胺化程度的影响。
The stability of copolymerization of acrylic acid acrylate by inverse suspension, the effects of reactive temperature and acrylic acid neutralization on copolymerization were studied in this article.
丙烯酸钠共聚反相悬浮体系稳定性、反应温度、丙烯酸中和度等对反应过程的影响进行了研究，研究表明：通过悬浮剂的复配可建立稳定的悬浮体系；
These crosslinkers are stable in water at normal bath temperature but become reactive at curing temperatures.
这些交联剂于正常槽液温度下在水中很稳定，但在固化温度下就变得活泼起来。
The influences of reactive conditions such as crosslinking degree, neutral degree, temperature and monomer proportion to the absorbency were investigated.
研究了聚合过程中的反应条件，如交联度、中和度、温度、单体配比等对吸收性能的影响。
The chemical calorific effect has a great influence on the temperature, the reaction rate, the polymer material structure and rheological property in reactive extrusion processes for polymerization.
在聚合反应挤出过程中，化学热效应显著影响材料体系温度，从而影响反应速率以及高分子材料结构与流变性能。
Under the premise of enough analyzing the distribution of temperature in the reactor, this paper suggest the concept of reactive area and elementally confirm the shape and boundary of its.
在比较充分的分析了反应器内温度分布的前提下，本论文提出了反应区的概念并初步确定了反应区的形状和边界。
The effect of N acylation on the solubility and crystallinity of chitosan and the effect of reactive time, temperature and proportion on degree of deacetylation were investigated.
研究了N-酰化反应对壳聚糖溶解性能和结晶性能的影响以及反应时间，温度，配比对脱乙酰度的影响。
The effects of reaction temperature and time, reactive stock concentration, aging mode and time on the properties of reaction product were discussed.
讨论了反应温度、反应物料浓度和老化方式及时间对反应产物性能的影响。
OBJECTIVE: Effects of heat denaturation time duration and temperature on the surface reactive amino group content of spray dried bovine serum albumin microspheres were investigated.
目的：考察热固化时间及温度对喷雾干燥牛血清白蛋白微球表面活性氨基含量的影响。
The temperature, dissolvent, the quantity of dissolvent and alkali of the dehalogenation reaction and their influences to the reactive degree are studied.
研究了脱卤反应的温度、溶剂、溶剂量、碱量对反应程度的影响。
The simplest case is that in which the temperature of the matrix is uniform, but temperature distributions within the reactive zones are also considered.
文中不仅对集装件温度是均一的简单情况进行了讨论，而且对反应区内温度具有空间分布的情况也进行了考虑。
A1N films grown by low temperature reactive r. f. sputtering are investigated with spectrum analysis.
本文用光谱分析的方法研究低温反应射频溅射生长的A1N薄膜。
By optimization of the technological conditions, the reactive product has low diethylene glycol content, and has stabilization in low temperature.
通过优化工艺条件，合成的产品具有二甘醇含量低，低温条件下稳定性好的特点。
The coating with high bond strength was synthesized by means of treatment of the gradient liquid phase sintering or medium temperature reactive sintering.
通过梯度液相烧结或中温反应烧结处理，热喷涂层具有很高的结合强度。
The features of a high temperature reactive furnace are described. The cokes made from each metamorphic coal of three different kinds of coals with different meta-morphic degrees are applied trially.
介绍了高温反应炉的特性，并用三种不同变质程度的单种煤所炼得的焦炭进行了初步的应用。
ZnO: Al thin films were prepared on slide glass substrates by non-reactive DC magnetron sputtering at room temperature.
采用直流磁控溅射工艺，室温下在载玻片上制备了氧化锌铝透明导电薄膜。
The synergetic effect of micro-crystallization and reactive effect on high temperature oxidation were summarized in this letter.
总结了目前广为研究的微晶化和活性元素效应在合金高温氧化过程中的作用，并讨论了二者的协同效应。
The La-Ni oxides synthesized by solid state reaction at room temperature shows a high photo-catalytic activity in degrading reactive dyes.
采用室温固相反应法制备的镧镍氧化物对活性染料具有较好的光催化效果。
The processing technology of this polymer alloy is briefly introduced. This polymer alloy is prepared by low temperature solid-state extrusion and reactive extrusion.
简要介绍了该聚合物合金的加工过程，其主要工艺是通过低温固相挤出和反应挤出制备。
The silk fabric was treated with high temperature, insolation and protease, the dyeability, fixation rate and total fixation efficiency of reactive dyes were measured before and after treatment.
对蚕丝织物进行高温、日晒、蛋白酶处理，测定织物处理前后丝素对活性染料上染率、固着率和总固着效率的影响。
This product is a two-component reactive adhesives, This product has good high and low temperature properties, bonding strength and anti-aging properties.
本产品为双组份反应型粘合剂，本产品具有良好的高低温性能、粘结强度和耐老化性能。
In particular, the amorphous titanium oxide is obtained by using the reactive sputtering method and via deposition at a low temperature and at a high film formation rate.
特别是利用反应性溅射法，在低温下以高成膜速度进行堆积，得到非晶的氧化钛。
And at high temperature the rates for reactive channel approach to the nonreactive ones, which indicates a competitive mechanism of the reaction.
高温时两种通道速率相近， 表现了反应的竞争机理。
And at high temperature the rates for reactive channel approach to the nonreactive ones, which indicates a competitive mechanism of the reaction.
高温时两种通道速率相近， 表现了反应的竞争机理。
应用推荐