All the experiments I report were made using the cosmic ray test system.
本论文的全部实验工作都是基于宇宙线测试完成的。
The castings after optimizing passed the X-Ray test and dissection inspection.
通过对铸件进行X射线探伤和解剖证实模拟结果是准确的。
This article introduces the influencing factor in identify with the x-ray test image.
概述了X-射线检测图像识别的影响因素；
Then the sample goes through transmission infrared ray test to determine the components of the whole sample.
然后对样品进行透射红外光谱测试，确定整个样品的成分组成。
The welded joints were completed by the X-ray test, mechanical properties tests and metallographic analysis.
焊后对焊接接头进行了射线检测、力学性能测试、接头金相组织分析。
X-ray test found that the grafted membranes show a decrease in crystallinity depending on the grafting yield.
射线衍射测试表明，接枝膜结晶度随接枝率的升高而降低。
The function, the structure and the cosmic ray test of the outer drift chamber for PEP-4 Experiment at SLAC are described.
本文描述了在美国SLAC的PEP-4实验中使用的大型外圆柱漂移室的作用、结构、宇宙线测试方法及其结果。
Properties of the Zn-Ni alloy deposit were determined with the methods of X-ray diffraction analysis, microhardness and salt -spray test.
采用X—射线衍射分析法、显微硬度测试法和盐雾试验法来检测镀层性能。
The paper mainly introduces concrete design of the hardware and program steps of Infrared ray test instrument's design and realization based on AT89C51RC.
本文主要介绍了基于AT89C51RC单片机的红外遥控密码锁的硬件及程序实现流程的具体设计。
The structure of the BES main drift chamber and arrangement of cosmic ray tests have been described briefly. The main test results of the chamber performance have been given.
简要描述了北京谱仪(BES)主漂移室的结构和宇宙线实验安排，给出利用宇宙线测试主漂移室性能的主要结果。
The analysis results from the fully reflective infrared ray test and that from the transmission infrared ray test are compared to determine the component of the intermediate layer of the sample.
对照全反射红外光谱和透射红外光谱的分析结果，从而确定样品中间层的成分。
Through dye check, X-ray test, and metallographic examination, quite a lot of cracks were found in the welds of a deaerator storage tank at the cogeneration plant of Shanghai Petrochemical Works.
上海石化总厂热电厂除氧器水箱，经着色探伤、x射线探伤、金相检验等方法检测后，发现焊缝有大量裂纹。
If the structure is of multi layers, first the upper and the lower surface of the sample go through fully reflective infrared ray test; the components of the upper and lower surface are determined.
若是多层不同材质，先对样品的上下表面进行全反射红外光谱测试，确定上下表层成分。
POV-Ray is one of the grandfather's of realistic 3d graphics creation software, full of those massive numbers-crunching tasks and perfect for our test.
POV - Ray是逼真3d图形创建软件的始祖之一，它完全由那些进行大量数字处理的任务构成，非常适合我们的测试。
As a test, we chose the POV-Ray 3.6.1 precompiled binary from Povray's Web site.
作为测试，我们选择了来自Povray的Web站点的POV - ray3.6.1预编译二进制程序。
Right now, the test involves lying on your back while the arm of a special X-ray device moves over your body to measure the thickness of various bones.
现在，这项检测需要你躺下，同时一个特别的如手臂一样的X光射线装置来回在你身体上移动来检测不同部位骨头的厚度。
We unfortunately don't have a blood test or an X-ray to confirm it.
很不幸，我们没有血液测试或X光测试来证实这种病。
After giving my patient painkillers, I took him to the X-ray room for a test called an intravenous urogram.
给病人吃了止痛药后，我带他去拍X光做静脉尿路造影检查。
The paper studies the chemical and mineralogical compositions, the technological and physical properties of tripoli by means of chemical analysis. X - ray diffraction and technological test.
借助于化学分析、X射线衍射分析、工艺性能试验等方法，对粉石英的化学成分、矿物成分、工艺物理性质进行了研究。
Ray tracing, used during generating realistic images, is systematically introduced in this article. And some improving methods are given for shadow test and antialiasing.
本文对逼真图形生成过程中所使用的光线跟踪法作了系统的介绍，并对其中的阴影测试及抗阶梯效应的几种改进方法作了说明。
The evaluation on the X - ray inspection technology and test results for the composite coaling thick - wall solid charge is described in the paper.
介绍复合包敷层厚壁固体药柱的X射线检验透照工艺的设计和检测结果的评价。
A type of X-ray called spiral computed tomography or CT can find lung cancer early, but it is expensive and also finds non-cancerous lesions that are expensive and risky to test.
一种立体计算机体层扫描能够发现早期肺癌，但费用昂贵，并能发现一些检测昂贵、有风险的非肿瘤病变。
Least squares polynomial smoothing was constantly used in X ray diffraction test.
射线衍射线常用多项式拟合移动平滑方法进行处理。
The bend Angle of the flyer plate was determined by flash X-ray photography during explosive welding and the value coincides with that obtained in the semicylinder test.
通过爆炸焊接过程的闪光X射线摄影，测得了飞板弯折角。其数值与半圆柱试验测得的飞板弯折角基本上相一致。
The reasons of high disintegration index of Meishan iron ore sinters are studied by storage and shatter test, as well as microprobe, X-ray and differential thermal analysis.
对梅山烧结矿粉碎率高的原因进行了剖析，研究中采用了贮存和落下试验、显微分析、X -射线分析、差热分析等。
Using MC method computing the capability of three representative X-ray detectors. It can offer the referrence for the des tector optimize design and the detect test.
采用MC计算研究三种代表性的X射线探测器的探测能力，为探测器参数的优化设计及检测能力的测试提供数据参考。
The importance of X-ray inspection, withstanding voltage test and voltage drop control were emphasized.
强调了X射线检查、耐电压检测、电压差管理等在质量管理上的重要性。
The phase compositions and characteristics of glass-ceramics products were determined by the comprehensive methods such as optical microscopy, X-ray diffraction, physical and chemical properties test.
通过光学显微分析、X射线衍射分析、物理化学性能测试等手段确定了微晶玻璃的物相组成及性能特征。
The microstructure and hardness of the layer of H13 tool steel gas-nitrided in different heat treatment conditions were studied by X-ray, SEM and micro-hardness test.
采用X射线衍射、扫描电镜及显微硬度等技术，综合比较和分析了H13模具钢在不同热处理状态下经相同气体渗氮处理后表层的组织结构和硬度。
The microstructure and hardness of the layer of H13 tool steel gas-nitrided in different heat treatment conditions were studied by X-ray, SEM and micro-hardness test.
采用X射线衍射、扫描电镜及显微硬度等技术，综合比较和分析了H13模具钢在不同热处理状态下经相同气体渗氮处理后表层的组织结构和硬度。
应用推荐