The coating composition, microstructure and phases were investigated by energy dispersive X ray analysis (EDXA), X ray diffraction(XRD), scanning electron microscope(SEM)and image analyzer.
运用能谱技术（EDXA）、X射线衍射仪（XRD）、扫描电子显微镜（SEM）和图像分析仪对涂层成分、显微组织、涂层相结构和组成进行了分析。
The structure and component of coating were analyzed by FTIR spectra, X ray diffraction (XRD) and transmission electron microscopy (TEM).
采用红外光谱、X射线衍射和透射电镜对涂层的组成和结构进行了分析。
Measurement of coating thickness in the proof-test of IC packages and metal cases using X-Ray Fluorescence (XRF) spectrometry is described.
介绍了在外壳检验中，应用X射线荧光光谱法（XRF），对外壳的镀涂层厚度进行测试；
Objective to study the bone ingrowth into the porous coating of retrieved femoral prosthesis and evaluate clinical value of X ray film in judging the stability of the prostheses.
目的研究翻修取出的假体柄多孔涂层内骨长入情况，评定X线平片判断假体稳定的应用价值。
The microstructure of the coating is analysed with metallographic microscope and X ray diffractometer.
用金相显微镜和X射线衍射仪分析涂层的显微组织。
The structures and surface morphology of coating and oxide film were characterized using X-ray diffraction and scanning electron microscopy.
利用X射线衍射和扫描电镜研究涂层和氧化物膜的结构和表面微观形貌。
Combined with the practice, this paper explored the advantages on application of infrared ray drying furnace for coating production line.
本文结合实际，对带材涂层生产线采用红外线烘干炉的优越性加以探讨。
The results showed for ultraviolet ray protection daiflon coating was the best, anti - aging film was better and the resin rich protective coating was the worst.
结果表明，聚三氟乙烯涂层对紫外线的防护效果最好，防老化薄膜次之，富树脂保护层最差。
The X-ray diffraction was used to determine the structure of the coating surface. At last, the shock abrasive wear test was performed.
用X射线衍射分析方法测定了镀层表面结构并作了冲击磨料磨损试验。
The morphology, composition and structure of the coating were investigated by scanning electron microscopy, energy dispersive spectrometer and X-ray diffractometer.
用扫描电镜、能谱仪和X射线衍射仪分别分析了涂层的形貌、化学成分和相组成。
The appearance, adhesion and corrosion resistance of the coating were tested. And the samples were detected and analysed by SEM, EDXA, X-ray diffraction and XPS.
同时，对镀层进行了外观、结合力和耐蚀性测试，并用SEM、EDXA、X射线衍射和XPS等测试方法对镀层结构和成分进行了分析，结果表明。
IRM group has over 50 years of experience developing systems to measure thickness, flatness, width and coating weight utilizing X-ray and laser technologies.
IRM集团具有超过50年的专业经验，利用X射线和激光技术生产开发测量厚度，平直度，宽度和金属涂层厚度的测量系统。
Phases constitution, microstructure and element distribution of the coating were studied by X-ray diffraction(XRD), scanning electron microscope(SEM) and electron probe microanalysis(EPMA).
通过X射线衍射分析（XRD）、扫描电镜（SEM）等观察分析了复合粉涂层表面形貌，分析了表面微裂纹和孔隙的形成过程。
The coating phase structure and chemical composition were analyzed by X-ray Diffraction (XRD) and X-ray Photoelectron Spectroscopy (XPS) respectively;
利用X射线衍射仪、X射线光电子能谱仪（XPS）对涂层的相结构及涂层的化学成分进行了分析和讨论；
Several composite coating samples were prepared in different concentration of carbon nano-tubes. The internal stress of composite coating was measured by X-ray diffraction method.
在不同碳纳米管浓度的镀液中制备了复合镀层的试样，用X射线衍射法测定了各复合镀层的内应力。
The microstructure and surface morphology of the coating was detected by X-ray diffraction and SEM. The microhardness and adhesion of the coating was tested.
用X射线衍射和扫描电子显微镜对镀层结构和形貌进行表征，并对镀层硬度及结合力进行测试。
Means of cyclic voltammetry. The electrodeposited coating has been analysed by X-ray diffraction.
对恒电位电解的沉积物进行了X射线衍射分析。
The effectiveness of coating boron particles coated with HTPB was characterized by using FT-IR, X-ray photoelectron spectroscopy and transmission electron microscope.
经过红外光谱、X-光电子能谱、透射电镜等对包覆效果进行了表征。
The microstructure and element distribution of the coating were investigated by scanning electric microscopy (SEM) and energy dispersive X-ray spectroscopy(EDS).
采用扫描电子显微镜（SEM）观察渗层表面、截面形貌，X射线能谱仪（EDS）检测渗层界面元素分布。
The microstructure and element distribution of the coating were investigated by scanning electric microscopy (SEM) and energy dispersive X-ray spectroscopy(EDS).
采用扫描电子显微镜（SEM）观察渗层表面、截面形貌，X射线能谱仪（EDS）检测渗层界面元素分布。
应用推荐